PrepIQ Florida FL Standard Modular Inspector Ultimate
Exam- Practice Questions & Code Rationales 2 versions
This specialized technical preparation guide delivers comprehensive practice questions,
verified answers, and detailed structural rationales custom-designed for the PrepIQ
Florida Standard Modular Inspector competency exam. It provides exhaustive coverage
of the Florida Building Code, modular construction standards, manufactured housing
regulations, structural wind-load parameters, and local Department of Business and
Professional Regulation (DBPR) enforcement statutes. Certification candidates and
code enforcement officers will master technical field verification steps, tie-down
engineering blueprints, and safety codes required to successfully secure their state
licensing credentials.
SECTION 1: FLORIDA STATUTES, RULES &
ADMINISTRATION (Questions 1–40)
1. Which Florida Statute governs the Florida Manufactured Building Act of 1979?
A) Chapter 468, Part XV
B) Chapter 553, Part I
C) Chapter 489, Part I
D) Chapter 471, Part II
Rationale: Chapter 553, Part I of the Florida Statutes is the legal foundation for the Florida
Manufactured Building Act of 1979, outlining licensing, standards, and enforcement for
manufactured buildings.
2. Which Florida Administrative Code rule specifically governs the inspection of
modular units?
A) Rule 61G19
B) Rule 62A12
C) Rule 75B07
D) Rule 90C05
Rationale: Rule 61G19 of the Florida Administrative Code contains the Building Code
Administrators and Inspectors Board (BCAIB) rules applicable to modular building
inspections.
,3. Which agency is responsible for licensing and regulating modular building
inspectors?
A) Florida Department of Transportation
B) Department of Business and Professional Regulation (DBPR)
C) Florida Department of Environmental Protection
D) Department of Health
Rationale: DBPR oversees the licensing and regulation of professional inspectors, including
those who inspect modular buildings.
4. How many years of experience as an inspector with local or state government
are required to take the modular inspector examination?
A) 1 year
B) 2 years
C) 3 years
D) 5 years
Rationale: Rule 61G19-6.016 requires three (3) years of experience as an inspector with
local government and/or state government, or three years as an inspector with an
independent inspection/plans review agency.
5. What is the content weighting for the Building domain on the Florida Modular
Building Inspector exam?
A) 17%
B) 21%
C) 33%
D) 8%
Rationale: The official examination bulletin specifies that the Building domain accounts for
33% of the total exam content.
6. What is the content weighting for the Plumbing domain on the Florida Modular
Building Inspector exam?
A) 33%
B) 21%
C) 17%
D) 8%
Rationale: The Plumbing domain accounts for 21% of the total exam content per the DBPR
examination bulletin.
,7. What is the content weighting for the Florida Codes and Standards domain?
A) 33%
B) 21%
C) 17%
D) 8%
Rationale: The Florida Codes and Standards domain accounts for 17% of the total exam
content.
8. What is the content weighting for the Mechanical domain on the Florida
Modular Building Inspector exam?
A) 33%
B) 21%
C) 17%
D) 8%
Rationale: The Mechanical domain accounts for 8% of the total exam content.
9. When an inspector discovers a code violation during a modular unit inspection,
what is the first ethical step they must take?
A) Ignore it if the builder offers a bribe
B) Immediately report the violation to the DBPR and the manufacturer
C) Adjust the violation to meet local preferences
D) Wait until the next inspection cycle to address it
Rationale: Ethical standards require inspectors to promptly report any violations to the
appropriate authorities and the responsible parties.
10. State-approved plans for a modular unit must be:
A) Kept only in the architect's office for reference
B) Physically present in the manufacturing facility for verification
C) Stored electronically on the inspector's personal device
D) Submitted to the local fire department only
Rationale: Inspectors must verify that the approved plans are physically available at the
factory to compare the unit under construction.
11. When comparing a modular building to its approved blueprints, an inspector
should primarily look for:
A) Color matching of interior paint
B) Deviations in dimensions, materials, and structural details
, C) The brand of appliances installed
D) Presence of decorative landscaping plans
Rationale: The core of plan verification is to identify any differences in dimensions,
materials, or structural details.
12. The local building official can perform a plan review of the modular building
portion of a permitted project and levy fees for that review.
A) True
B) False
Rationale: The local building department can review the building when reviewing the
foundation and all other site-related portions, but cannot levy a fee for the review of the
modular building. Modular buildings have already been reviewed by a Department-
approved Third Party Agency, and the manufacturer has paid a fee for that review.
13. In State Statute 553.36 definitions, a component can be a window, door, or an
appliance (e.g., a refrigerator, stove, or furniture).
A) True
B) False
Rationale: All components as defined in SS 553.36 are three-dimensional systems used as
part of a modular building and cannot be removed without affecting the DBPR approval
status of the building.
14. A modular building can be installed on a mobile home (HUD) foundation
system and be considered Florida Building Code compliant.
A) True
B) False
Rationale: HUD foundation components and designs have not been tested according to
the Florida Building Code and do not comply with SS 553.36(6) or SS 553.842.
15. In-plant modular buildings do not have to comply with a local jurisdiction's
amendments to the Florida Building Code.
A) True
B) False
Rationale: Modular buildings must comply with the Florida Building Code but not local
amendments to the code (SS 553.37(4)).
Exam- Practice Questions & Code Rationales 2 versions
This specialized technical preparation guide delivers comprehensive practice questions,
verified answers, and detailed structural rationales custom-designed for the PrepIQ
Florida Standard Modular Inspector competency exam. It provides exhaustive coverage
of the Florida Building Code, modular construction standards, manufactured housing
regulations, structural wind-load parameters, and local Department of Business and
Professional Regulation (DBPR) enforcement statutes. Certification candidates and
code enforcement officers will master technical field verification steps, tie-down
engineering blueprints, and safety codes required to successfully secure their state
licensing credentials.
SECTION 1: FLORIDA STATUTES, RULES &
ADMINISTRATION (Questions 1–40)
1. Which Florida Statute governs the Florida Manufactured Building Act of 1979?
A) Chapter 468, Part XV
B) Chapter 553, Part I
C) Chapter 489, Part I
D) Chapter 471, Part II
Rationale: Chapter 553, Part I of the Florida Statutes is the legal foundation for the Florida
Manufactured Building Act of 1979, outlining licensing, standards, and enforcement for
manufactured buildings.
2. Which Florida Administrative Code rule specifically governs the inspection of
modular units?
A) Rule 61G19
B) Rule 62A12
C) Rule 75B07
D) Rule 90C05
Rationale: Rule 61G19 of the Florida Administrative Code contains the Building Code
Administrators and Inspectors Board (BCAIB) rules applicable to modular building
inspections.
,3. Which agency is responsible for licensing and regulating modular building
inspectors?
A) Florida Department of Transportation
B) Department of Business and Professional Regulation (DBPR)
C) Florida Department of Environmental Protection
D) Department of Health
Rationale: DBPR oversees the licensing and regulation of professional inspectors, including
those who inspect modular buildings.
4. How many years of experience as an inspector with local or state government
are required to take the modular inspector examination?
A) 1 year
B) 2 years
C) 3 years
D) 5 years
Rationale: Rule 61G19-6.016 requires three (3) years of experience as an inspector with
local government and/or state government, or three years as an inspector with an
independent inspection/plans review agency.
5. What is the content weighting for the Building domain on the Florida Modular
Building Inspector exam?
A) 17%
B) 21%
C) 33%
D) 8%
Rationale: The official examination bulletin specifies that the Building domain accounts for
33% of the total exam content.
6. What is the content weighting for the Plumbing domain on the Florida Modular
Building Inspector exam?
A) 33%
B) 21%
C) 17%
D) 8%
Rationale: The Plumbing domain accounts for 21% of the total exam content per the DBPR
examination bulletin.
,7. What is the content weighting for the Florida Codes and Standards domain?
A) 33%
B) 21%
C) 17%
D) 8%
Rationale: The Florida Codes and Standards domain accounts for 17% of the total exam
content.
8. What is the content weighting for the Mechanical domain on the Florida
Modular Building Inspector exam?
A) 33%
B) 21%
C) 17%
D) 8%
Rationale: The Mechanical domain accounts for 8% of the total exam content.
9. When an inspector discovers a code violation during a modular unit inspection,
what is the first ethical step they must take?
A) Ignore it if the builder offers a bribe
B) Immediately report the violation to the DBPR and the manufacturer
C) Adjust the violation to meet local preferences
D) Wait until the next inspection cycle to address it
Rationale: Ethical standards require inspectors to promptly report any violations to the
appropriate authorities and the responsible parties.
10. State-approved plans for a modular unit must be:
A) Kept only in the architect's office for reference
B) Physically present in the manufacturing facility for verification
C) Stored electronically on the inspector's personal device
D) Submitted to the local fire department only
Rationale: Inspectors must verify that the approved plans are physically available at the
factory to compare the unit under construction.
11. When comparing a modular building to its approved blueprints, an inspector
should primarily look for:
A) Color matching of interior paint
B) Deviations in dimensions, materials, and structural details
, C) The brand of appliances installed
D) Presence of decorative landscaping plans
Rationale: The core of plan verification is to identify any differences in dimensions,
materials, or structural details.
12. The local building official can perform a plan review of the modular building
portion of a permitted project and levy fees for that review.
A) True
B) False
Rationale: The local building department can review the building when reviewing the
foundation and all other site-related portions, but cannot levy a fee for the review of the
modular building. Modular buildings have already been reviewed by a Department-
approved Third Party Agency, and the manufacturer has paid a fee for that review.
13. In State Statute 553.36 definitions, a component can be a window, door, or an
appliance (e.g., a refrigerator, stove, or furniture).
A) True
B) False
Rationale: All components as defined in SS 553.36 are three-dimensional systems used as
part of a modular building and cannot be removed without affecting the DBPR approval
status of the building.
14. A modular building can be installed on a mobile home (HUD) foundation
system and be considered Florida Building Code compliant.
A) True
B) False
Rationale: HUD foundation components and designs have not been tested according to
the Florida Building Code and do not comply with SS 553.36(6) or SS 553.842.
15. In-plant modular buildings do not have to comply with a local jurisdiction's
amendments to the Florida Building Code.
A) True
B) False
Rationale: Modular buildings must comply with the Florida Building Code but not local
amendments to the code (SS 553.37(4)).
