1
BSIS Firearm Written Exam Test Bank
Complete Questions and Answers for
Certification Actual Exam 2026/2027
Complete Exam-Style Questions with
Detailed Rationales | 100% Verified | Pass
Guaranteed – A+ Graded
Part I: Firearm Safety, Handling & Basic Marksmanship
(Questions 1-15)
Q1: You are clearing a malfunction on the firing line when
another shooter's firearm accidentally discharges, sending a
round close to your position. What is your immediate priority
according to fundamental firearm safety rules?
A. Return fire to neutralize the threat
B. Unload your firearm and place it on the ground
C. Keep your firearm pointed downrange and seek cover
[CORRECT]
D. Turn around to identify the source of the discharge
Correct Answer: C
Rationale: The best answer is to maintain muzzle discipline by
keeping your firearm pointed downrange while seeking cover.
This matches the fundamental safety rule to never point a
,2
firearm at anything you do not intend to shoot, ensuring you do
not inadvertently sweep others while reacting.
Q2: During a routine shift at a construction site, you need to
unload your revolver before entering the main office. Which of
the following describes the safest procedure?
A. Point the firearm at the floor, open the cylinder, and push the
ejector rod
B. Point the firearm in a safe direction, open the cylinder, and
manually extract the cartridges [CORRECT]
C. Open the cylinder while the firearm is holstered, then extract
the cartridges
D. Press the trigger while opening the cylinder to safely drop the
hammer
Correct Answer: B
Rationale: This choice is correct because you must always point
the firearm in a safe direction before and during unloading, and
manually extracting cartridges prevents the accidental discharge
risks associated with rough ejection.
Q3: On the qualification range, the instructor calls out, "Load
and make ready!" You insert a loaded magazine, rack the slide,
and then what must you immediately verify before holstering?
A. The safety is on and the hammer is cocked
,3
B. The chamber is empty and the magazine is seated
C. The firearm is in battery by pushing on the slide
D. The round properly chambered and the slide fully closed
[CORRECT]
Correct Answer: D
Rationale: The best answer is to visually or physically confirm
the slide is fully closed and the firearm is in battery with a
chambered round. This aligns with BSIS requirements to ensure
your weapon is fully functional before securing it in the holster.
Q4: You are transporting your exposed firearm to a new post in
your personal vehicle. Under California law and BSIS best
practices for security personnel, how must the firearm be stored
during transport if you do not have a concealed carry permit?
A. Loaded and holstered on your hip within reach
B. Unloaded and locked in the trunk or a locked container
[CORRECT]
C. Loaded on the passenger seat under a jacket
D. Unloaded in the glove compartment with the magazine beside
it
Correct Answer: B
Rationale: This matches the California law that requires an
unloaded firearm to be transported in a locked container or the
, 4
trunk of a vehicle when not possessing a concealed carry permit,
keeping it inaccessible during transit.
Q5: Range Log Snippet: "Officer failed to qualify. Score: 168.
Qualification Minimum: 210. Misses: 4. Malfunctions: 1 (Type
1)." Based on this data snippet, what is the most likely cause of
the Type 1 malfunction noted in the log?
A. The firing pin broke upon impact
B. The magazine failed to feed a new round [CORRECT]
C. A spent casing failed to eject from the chamber
D. The primer failed to ignite on a loaded round
Correct Answer: B
Rationale: This choice is correct because a Type 1 malfunction
is a failure to feed, typically caused by a magazine issue where
the next round does not present into the chamber properly.
Q6: You draw your semi-automatic pistol on the range, press the
trigger, and hear a distinct "click" instead of a bang. The round
is seated, and the slide is fully forward. What is your immediate
action drill?
A. Tap the bottom of the magazine and rack the slide
[CORRECT]
B. Remove the magazine, rack the slide, and re-insert the
magazine
BSIS Firearm Written Exam Test Bank
Complete Questions and Answers for
Certification Actual Exam 2026/2027
Complete Exam-Style Questions with
Detailed Rationales | 100% Verified | Pass
Guaranteed – A+ Graded
Part I: Firearm Safety, Handling & Basic Marksmanship
(Questions 1-15)
Q1: You are clearing a malfunction on the firing line when
another shooter's firearm accidentally discharges, sending a
round close to your position. What is your immediate priority
according to fundamental firearm safety rules?
A. Return fire to neutralize the threat
B. Unload your firearm and place it on the ground
C. Keep your firearm pointed downrange and seek cover
[CORRECT]
D. Turn around to identify the source of the discharge
Correct Answer: C
Rationale: The best answer is to maintain muzzle discipline by
keeping your firearm pointed downrange while seeking cover.
This matches the fundamental safety rule to never point a
,2
firearm at anything you do not intend to shoot, ensuring you do
not inadvertently sweep others while reacting.
Q2: During a routine shift at a construction site, you need to
unload your revolver before entering the main office. Which of
the following describes the safest procedure?
A. Point the firearm at the floor, open the cylinder, and push the
ejector rod
B. Point the firearm in a safe direction, open the cylinder, and
manually extract the cartridges [CORRECT]
C. Open the cylinder while the firearm is holstered, then extract
the cartridges
D. Press the trigger while opening the cylinder to safely drop the
hammer
Correct Answer: B
Rationale: This choice is correct because you must always point
the firearm in a safe direction before and during unloading, and
manually extracting cartridges prevents the accidental discharge
risks associated with rough ejection.
Q3: On the qualification range, the instructor calls out, "Load
and make ready!" You insert a loaded magazine, rack the slide,
and then what must you immediately verify before holstering?
A. The safety is on and the hammer is cocked
,3
B. The chamber is empty and the magazine is seated
C. The firearm is in battery by pushing on the slide
D. The round properly chambered and the slide fully closed
[CORRECT]
Correct Answer: D
Rationale: The best answer is to visually or physically confirm
the slide is fully closed and the firearm is in battery with a
chambered round. This aligns with BSIS requirements to ensure
your weapon is fully functional before securing it in the holster.
Q4: You are transporting your exposed firearm to a new post in
your personal vehicle. Under California law and BSIS best
practices for security personnel, how must the firearm be stored
during transport if you do not have a concealed carry permit?
A. Loaded and holstered on your hip within reach
B. Unloaded and locked in the trunk or a locked container
[CORRECT]
C. Loaded on the passenger seat under a jacket
D. Unloaded in the glove compartment with the magazine beside
it
Correct Answer: B
Rationale: This matches the California law that requires an
unloaded firearm to be transported in a locked container or the
, 4
trunk of a vehicle when not possessing a concealed carry permit,
keeping it inaccessible during transit.
Q5: Range Log Snippet: "Officer failed to qualify. Score: 168.
Qualification Minimum: 210. Misses: 4. Malfunctions: 1 (Type
1)." Based on this data snippet, what is the most likely cause of
the Type 1 malfunction noted in the log?
A. The firing pin broke upon impact
B. The magazine failed to feed a new round [CORRECT]
C. A spent casing failed to eject from the chamber
D. The primer failed to ignite on a loaded round
Correct Answer: B
Rationale: This choice is correct because a Type 1 malfunction
is a failure to feed, typically caused by a magazine issue where
the next round does not present into the chamber properly.
Q6: You draw your semi-automatic pistol on the range, press the
trigger, and hear a distinct "click" instead of a bang. The round
is seated, and the slide is fully forward. What is your immediate
action drill?
A. Tap the bottom of the magazine and rack the slide
[CORRECT]
B. Remove the magazine, rack the slide, and re-insert the
magazine
