Mako Comprehensive Resource To Help You Ace Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. Which CT landmarks define the sTEA - CORRECT ANSWER Medial
and lateral epicondyles
2. Identify the CT landmarks related to the tbia - CORRECT ANSWER
Rotational landmark, medial epicondyle, lateral epicondyle, and tibia
knee centre
3. Which CT landmarks define the mechanical axis of the limb -
CORRECT ANSWER Hip centre, medial malleoli, lateral malleoli
4. Tibi knee centre is defined as - CORRECT ANSWER Slightly anterior
to the eminence peaks and posterior to the ACL footprint
5. The anterior/posterior axis of the tibia is defined by - CORRECT
ANSWER The rotational landmark
6. Which CT landmarks define the mechanical axis of the tibia -
CORRECT ANSWER Tibia knee centre, medial malleoli, lateral
malleoli
7. Landmark collection is part of the bone registratio process -
CORRECT ANSWER True
8. The surgeon user is assessing the joint on the ligament balancing
page and disagrees with the coronal varus/valgus alignment values
displayed to the patient's actual coronal varus/valgus alignment
angle. What could be the root cause - CORRECT ANSWER The CT
landmarks are captured incorrectly
9. The user has completed the implant plan. Upon reviewing the pre-
operative plan with the surgeon user, the hip centre landmark was
, updated. Which of the following has been impacted - CORRECT
ANSWER Femoral resection landmarks
10. The user has completed the implant plan. Upon reviewing the
pre-operative plan with the surgeon user. The rotational landmark
was updated. which of the following has been impacted. - CORRECT
ANSWER Tibial segmentation
Tibial bounds
Tibia checkpoint placement
No mentioned answer
11. The surgeon user is attempting to complete the tibial bone
registration process and is unable to verify the bone registration in all
three planes. What pre-operative step could be associated with the
failed result. - CORRECT ANSWER Medial and Lateral malleolus
12. If the software hangs or freezes, which step would indicate
whether or not the keyboard is responding? - CORRECT ANSWER
press caps lock
- CORRECT ANSWER alt, print screen, k
13. What are the two times that the camera must remain
stationary? - CORRECT ANSWER hip center, combined accuracy
check
14. After capturing hip center, you receive the unable to find
accurate hip center warning. The patients femoral head could have
dislocated, causing this warning. - CORRECT ANSWER true
15. After capturing hip center, you receive the unable to find
accurate hip center warning. This could have occurred if the femoral
array dropped out of the cameras field of view during the capture
process. - CORRECT ANSWER fasle
16. After capturing hip center, you receive the unable to find
accurate hip center warning. This could have occurred if the tibial
array dropped out of the cameras field of view during the capture
process. - CORRECT ANSWER false
,17. After capturing hip center, you receive the unable to find
accurate hip center warning. This could have occurred if the leg was
rotated in the wrong direction during the capture process - CORRECT
ANSWER false
18. What is the range that hip center can be captured and receive
the unable to find accurate hip center warning but the software will let
you proceed with the case? - CORRECT ANSWER 5mm to 10mm
19. When verifying the femoral checkpoint to enter bone prep, the
checkpoint result is greater than 1.0mm. This could have occurred if
the checkpoint was not put into hard and solid bone. - CORRECT
ANSWER true
20. When verifying the femoral checkpoint to enter bone prep, the
checkpoint result is greater than 1.0mm. This could have occurred if
the surgeon incorrectly placed the probe in the tibial checkpoint. -
CORRECT ANSWER true
21. When verifying the femoral checkpoint to enter bone prep, the
checkpoint result is greater than 1.0mm. This could have occurred if
the femoral array was bumped. - CORRECT ANSWER true
22. After completing bone registration of the femur, the registration
result is greater than 1mm. This could have occurred if the
osteophytes were not segmented. - CORRECT ANSWER true
23. After completing bone registration of the femur, the registration
result is greater than 1mm. This could have occurred if the
osteophytes were removed before bone registration - CORRECT
ANSWER true
24. After completing bone registration of the femur, the registration
result is greater than 1mm. This could have occurred if the surgeon
pressed too hard with the probe when selecting points - CORRECT
ANSWER true
25. After completing bone registration of the femur, the registration
result is greater than 1mm. This could have occurred if the hip center
landmark was not taken correctly - CORRECT ANSWER true
, 26. After completing bone registration of the tibia, the registration
result is greater than 1mm. This could have occurred if the hip center
landmark was not taken correctly. - CORRECT ANSWER false
27. After repeatedly registering the femur, the registration result
continues to be 1mm or higher. What should you do? - CORRECT
ANSWER confirm you have the correct patient information
recapture patient landmarks
check CT landmarks
confirm you have the correct operative side
28. After completing bone registration of the tibia, the registration
result is greater than 1mm. This could have occurred if the incorrect
operative side was selected. - CORRECT ANSWER true
29. After completing bone registration of the tibia, the registration
result is greater than 1mm. This could have occurred if the wrong
patient was selected. - CORRECT ANSWER true
30. After completing bone registration of the tibia, the registration
result is greater than 1mm. This could have occurred if the
segmentation was not done accurately. - CORRECT ANSWER true
31. After completing RIO registration, the registration result is
greater than 1mm. This could occur if the femoral and tibial arrays
were not placed on the patient yet. - CORRECT ANSWER false
32. After completing RIO registration, the registration result is
greater than 1mm. This could occur if the drape was not seated
properly. - CORRECT ANSWER true
33. After completing RIO registration, the registration result is
greater than 1mm. This could occur if the end effector array was not
flush with the registration tool - CORRECT ANSWER true
34. After executing the probe check the resultant error was greater
than 1.0mm. This could happen if the probe was not held steady. -
CORRECT ANSWER true
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. Which CT landmarks define the sTEA - CORRECT ANSWER Medial
and lateral epicondyles
2. Identify the CT landmarks related to the tbia - CORRECT ANSWER
Rotational landmark, medial epicondyle, lateral epicondyle, and tibia
knee centre
3. Which CT landmarks define the mechanical axis of the limb -
CORRECT ANSWER Hip centre, medial malleoli, lateral malleoli
4. Tibi knee centre is defined as - CORRECT ANSWER Slightly anterior
to the eminence peaks and posterior to the ACL footprint
5. The anterior/posterior axis of the tibia is defined by - CORRECT
ANSWER The rotational landmark
6. Which CT landmarks define the mechanical axis of the tibia -
CORRECT ANSWER Tibia knee centre, medial malleoli, lateral
malleoli
7. Landmark collection is part of the bone registratio process -
CORRECT ANSWER True
8. The surgeon user is assessing the joint on the ligament balancing
page and disagrees with the coronal varus/valgus alignment values
displayed to the patient's actual coronal varus/valgus alignment
angle. What could be the root cause - CORRECT ANSWER The CT
landmarks are captured incorrectly
9. The user has completed the implant plan. Upon reviewing the pre-
operative plan with the surgeon user, the hip centre landmark was
, updated. Which of the following has been impacted - CORRECT
ANSWER Femoral resection landmarks
10. The user has completed the implant plan. Upon reviewing the
pre-operative plan with the surgeon user. The rotational landmark
was updated. which of the following has been impacted. - CORRECT
ANSWER Tibial segmentation
Tibial bounds
Tibia checkpoint placement
No mentioned answer
11. The surgeon user is attempting to complete the tibial bone
registration process and is unable to verify the bone registration in all
three planes. What pre-operative step could be associated with the
failed result. - CORRECT ANSWER Medial and Lateral malleolus
12. If the software hangs or freezes, which step would indicate
whether or not the keyboard is responding? - CORRECT ANSWER
press caps lock
- CORRECT ANSWER alt, print screen, k
13. What are the two times that the camera must remain
stationary? - CORRECT ANSWER hip center, combined accuracy
check
14. After capturing hip center, you receive the unable to find
accurate hip center warning. The patients femoral head could have
dislocated, causing this warning. - CORRECT ANSWER true
15. After capturing hip center, you receive the unable to find
accurate hip center warning. This could have occurred if the femoral
array dropped out of the cameras field of view during the capture
process. - CORRECT ANSWER fasle
16. After capturing hip center, you receive the unable to find
accurate hip center warning. This could have occurred if the tibial
array dropped out of the cameras field of view during the capture
process. - CORRECT ANSWER false
,17. After capturing hip center, you receive the unable to find
accurate hip center warning. This could have occurred if the leg was
rotated in the wrong direction during the capture process - CORRECT
ANSWER false
18. What is the range that hip center can be captured and receive
the unable to find accurate hip center warning but the software will let
you proceed with the case? - CORRECT ANSWER 5mm to 10mm
19. When verifying the femoral checkpoint to enter bone prep, the
checkpoint result is greater than 1.0mm. This could have occurred if
the checkpoint was not put into hard and solid bone. - CORRECT
ANSWER true
20. When verifying the femoral checkpoint to enter bone prep, the
checkpoint result is greater than 1.0mm. This could have occurred if
the surgeon incorrectly placed the probe in the tibial checkpoint. -
CORRECT ANSWER true
21. When verifying the femoral checkpoint to enter bone prep, the
checkpoint result is greater than 1.0mm. This could have occurred if
the femoral array was bumped. - CORRECT ANSWER true
22. After completing bone registration of the femur, the registration
result is greater than 1mm. This could have occurred if the
osteophytes were not segmented. - CORRECT ANSWER true
23. After completing bone registration of the femur, the registration
result is greater than 1mm. This could have occurred if the
osteophytes were removed before bone registration - CORRECT
ANSWER true
24. After completing bone registration of the femur, the registration
result is greater than 1mm. This could have occurred if the surgeon
pressed too hard with the probe when selecting points - CORRECT
ANSWER true
25. After completing bone registration of the femur, the registration
result is greater than 1mm. This could have occurred if the hip center
landmark was not taken correctly - CORRECT ANSWER true
, 26. After completing bone registration of the tibia, the registration
result is greater than 1mm. This could have occurred if the hip center
landmark was not taken correctly. - CORRECT ANSWER false
27. After repeatedly registering the femur, the registration result
continues to be 1mm or higher. What should you do? - CORRECT
ANSWER confirm you have the correct patient information
recapture patient landmarks
check CT landmarks
confirm you have the correct operative side
28. After completing bone registration of the tibia, the registration
result is greater than 1mm. This could have occurred if the incorrect
operative side was selected. - CORRECT ANSWER true
29. After completing bone registration of the tibia, the registration
result is greater than 1mm. This could have occurred if the wrong
patient was selected. - CORRECT ANSWER true
30. After completing bone registration of the tibia, the registration
result is greater than 1mm. This could have occurred if the
segmentation was not done accurately. - CORRECT ANSWER true
31. After completing RIO registration, the registration result is
greater than 1mm. This could occur if the femoral and tibial arrays
were not placed on the patient yet. - CORRECT ANSWER false
32. After completing RIO registration, the registration result is
greater than 1mm. This could occur if the drape was not seated
properly. - CORRECT ANSWER true
33. After completing RIO registration, the registration result is
greater than 1mm. This could occur if the end effector array was not
flush with the registration tool - CORRECT ANSWER true
34. After executing the probe check the resultant error was greater
than 1.0mm. This could happen if the probe was not held steady. -
CORRECT ANSWER true
