Which of the following is a term used to describe a body Personal fall arrest system
harness used in conjunction with a shock absorbing
lanyard?
A mechanic is working on a construction job, and finds the Wear hearing protection
carpenter using a powder activated tool to anchor wall
track. Of the following, which precaution should the
mechanic take?
Which is the best way to communicate with your coworkers Two-way radio
while you are in the machine room and they are working in
the pit?
A mechanic hurts their back while lifting a heavy box. A Muscle stretched beyond limits
doctor diagnoses a "strain". What type of Injury did they
sustain?
You are about to step to a car top. After activating the top Close the hoist way doors and set up a hall call
of car stop switch and the inspection switch, what is the
next step to verify that they work?
What safety device might you encounter in a hydraulic Plunger gripper
elevator pit?
What is the most serious consequence of incorrect lifting? Spinal injury
What is called the "silent killer" The counter weight
A mechanic needs to ride on the car top, but a top-of car Establish communication with a qualified person in the car
operating device is not available. What should the
mechanic do?
You are about to perform routine maintenance on an Verify no power with appropriate test equipment
elevator. After applying a lock and a tag, what step should
you take?
When does ASME A17.1 require a pit ladder to be When pit depth exceeds 35"
installed?
A mechanic is taking a trouble call in a dumbwaiter, and Car safeties
realizes he must stand on the car top, what should the
dumbwaiter be equipped with?
When working around electricity, which of the following Remove jewelry and metal frames glasses
safety precautions should be followed?
When are elevator constructors permitted to ride inside a They are not permitted to ride inside any dumbwaiter
400lb. Capacity dumbwaiter
Who is ultimately responsible for ensuring adequate You
lighting at a work site?
Stuvia.com 2026 - 2027
, NEIEP 100 Elevator Final Exam - Exam Prep, Practice Questions & Verified Answers
Your mechanic asks you to perform a job site inspection Your mechanic
and you find a serious OSHA violation. Who would you
notify first?
What are the two most common causes of accidents to Trips and falls, and being struck by the doors
members of the general public on elevators?
Before shortening a governor rope, what safety steps LOTO and support tension sheave
should be taken?
You aren't sure if a particular hoistway is considered a OSHA 29 CFR 1926 code
permit-required confined space. Where can you find more
information?
You arrive at the machine room to replace a thrust bearing Do not start work until the lighting is restored
and find the lights are not working. What should you do?
After locking out and tagging out the electrical system, Install a mechanical lock
what safety step must be taken before entering an
escalator truss?
A mechanic is about to lubricate a governor tension Lock out and tag out
sheave in a traction elevator pit. Before beginning work,
what must be done?
An elevator constructor is asked to check on something in When hoistway door will be open more than 5"
the pit. When must barriers be installed?
When is public safety an elevator constructors During all work-related activities
responsibility?
When carrying a screwdriver in your pocket on a car top, It doesn't matter; you should never carry a screw driver in your pocket
what safety factors must be considered?
You are ordering wood planking to provide overhead 2"
protection for a temporary working platform. At a minimum,
how thick must the wood be?
Which organization' s code prohibits storing anything on ASME
top of the car?
You are modernizing an elevator where the Public is Solid barricade at least 8' high, fully enclosing the work area
present. What are the barricade requirements?
Why did the elevator mechanic direct the apprentice not to The risk of exposure to Carbon Monoxide fumes
run gasoline generator in an enclosed parking garage?
A mechanic is checking the condition of the belts on a After locking out and tagging out the mainline
hydraulic elevator. When is it safe to check the tension?
Stuvia.com 2026 - 2027