NYC SIGN HANGER LICENSE EXAM QUESTIONS WITH CORRECT
ANSWERS (VERIFIED ANSWERS) PLUS RATIONALES 2026 Q&A |
INSTANT DOWNLOAD PDF] – QUESTIONS AND ANSWERS |
VERIFIED AND WELL DETAILED ANSWERS | PLUS RATIONALES |
GUARANTEED PASS | LATEST EXAM UPDATE
CORE DOMAINS
Licensing Qualifications, Scope, and Exemptions
NYC Administrative Code and Regulatory Compliance
Sign Construction, Supports, and Structural Considerations
Rigging, Hoisting, Lifting, and Lowering Operations
Job-Site Safety, Fall Protection, and Public Protection
Plans, Specifications, Permits, and Documentation
Electrical, Illuminated Signs, and Trade Coordination
Inspection, Troubleshooting, and Defective Conditions
Professional Judgment, Ethics, and Compliance Scenarios
Advanced Integrated Sign Hanger Scenarios
INTRODUCTION
The NYC Sign Hanger License examination assesses the knowledge, skills, and judgment required to
safely hoist, lower, hang, and attach signs in New York City. Candidates must demonstrate mastery of
licensing regulations, structural principles, rigging operations, safety protocols, and permit procedures.
The exam employs multiple-choice questions and scenario-based problems that require applying
technical knowledge to realistic workplace situations. Emphasis is placed on regulatory compliance,
public safety, professional responsibility, and sound decision-making. Successful candidates must interpret
codes, analyze structural conditions, evaluate risk, and select appropriate actions that protect workers,
pedestrians, and property. This examination ensures that licensed sign hangers possess the competence
to perform their duties in accordance with the highest professional and safety standards.
,SECTION ONE – QUESTIONS 1–100
Question 1
Which NYC agency primarily regulates the installation of signs and issues Sign Hanger licenses?
A. FDNY
B. DEP
C. Department of Buildings (DOB)
D. DOT
🟢 C. Department of Buildings (DOB)
🔴 Explanation: The NYC Department of Buildings administers and enforces licensing, permitting, and
safety requirements for sign hanger contractors, including the issuance of Master and Special Sign
Hanger licenses.
Question 2
A sign measures 145 square feet on one face and weighs 1,150 pounds. Which license classification is
authorized to perform the sign-hanging work?
A. No license required
B. Special Sign Hanger
C. Master Sign Hanger only
D. Registered General Contractor
🟢 B. Special Sign Hanger
🔴 Explanation: A Special Sign Hanger may hoist, lower, hang, or attach an exterior sign not exceeding
150 square feet measured on one face and not exceeding 1,200 pounds.
Question 3
,A sign is 140 square feet but weighs 1,250 pounds. The contractor proposes to proceed under a
Special Sign Hanger license. What is the critical problem?
A. The weight exceeds the Special Sign Hanger limit
B. The area is automatically considered two faces
C. Weight is irrelevant for Special Sign Hangers
D. Only illumination determines the license
🟢 A. The weight exceeds the Special Sign Hanger limit
🔴 Explanation: Both limitations must be satisfied. Exceeding either 150 square feet or 1,200 pounds
places the sign outside the Special Sign Hanger authorization.
Question 4
Which sign is exempt from the sign hanger licensing requirement based on size and weight?
A. A 100-square-foot sign weighing 20 pounds
B. A 70-square-foot sign weighing 25 pounds
C. A 75-square-foot sign weighing 30 pounds
D. A 100-square-foot sign weighing 25 pounds
🟢 B. A 70-square-foot sign weighing 25 pounds
🔴 Explanation: One exemption applies to signs not exceeding 75 square feet measured on one face
and not exceeding 25 pounds. Both conditions must be satisfied.
Question 5
A sign is exactly 150 square feet on one face and weighs exactly 1,200 pounds. Which statement is
correct?
A. A Master Sign Hanger is required
B. It is exempt from licensing
C. A Special Sign Hanger may perform the work
D. Only an electrician may install it
, 🟢 C. A Special Sign Hanger may perform the work
🔴 Explanation: The statutory thresholds use "not exceeding," so a sign exactly at both limits remains
within Special Sign Hanger authorization.
Question 6
What document authorizes a licensed sign hanger to perform sign installation work in NYC?
A. Certificate of Occupancy
B. Sign Hanger License
C. Business Certificate
D. Work Order
🟢 B. Sign Hanger License
🔴 Explanation: A valid NYC Sign Hanger License authorizes installation, maintenance, and removal of
signs in accordance with DOB regulations.
Question 7
Who must notify DOB before beginning permitted sign work?
A. The property owner
B. The licensed sign hanger
C. The sign manufacturer
D. The building superintendent
🟢 B. The licensed sign hanger
🔴 Explanation: The licensed sign hanger is responsible for notifying DOB and ensuring that all permit
conditions are met before commencing work.
Question 8
ANSWERS (VERIFIED ANSWERS) PLUS RATIONALES 2026 Q&A |
INSTANT DOWNLOAD PDF] – QUESTIONS AND ANSWERS |
VERIFIED AND WELL DETAILED ANSWERS | PLUS RATIONALES |
GUARANTEED PASS | LATEST EXAM UPDATE
CORE DOMAINS
Licensing Qualifications, Scope, and Exemptions
NYC Administrative Code and Regulatory Compliance
Sign Construction, Supports, and Structural Considerations
Rigging, Hoisting, Lifting, and Lowering Operations
Job-Site Safety, Fall Protection, and Public Protection
Plans, Specifications, Permits, and Documentation
Electrical, Illuminated Signs, and Trade Coordination
Inspection, Troubleshooting, and Defective Conditions
Professional Judgment, Ethics, and Compliance Scenarios
Advanced Integrated Sign Hanger Scenarios
INTRODUCTION
The NYC Sign Hanger License examination assesses the knowledge, skills, and judgment required to
safely hoist, lower, hang, and attach signs in New York City. Candidates must demonstrate mastery of
licensing regulations, structural principles, rigging operations, safety protocols, and permit procedures.
The exam employs multiple-choice questions and scenario-based problems that require applying
technical knowledge to realistic workplace situations. Emphasis is placed on regulatory compliance,
public safety, professional responsibility, and sound decision-making. Successful candidates must interpret
codes, analyze structural conditions, evaluate risk, and select appropriate actions that protect workers,
pedestrians, and property. This examination ensures that licensed sign hangers possess the competence
to perform their duties in accordance with the highest professional and safety standards.
,SECTION ONE – QUESTIONS 1–100
Question 1
Which NYC agency primarily regulates the installation of signs and issues Sign Hanger licenses?
A. FDNY
B. DEP
C. Department of Buildings (DOB)
D. DOT
🟢 C. Department of Buildings (DOB)
🔴 Explanation: The NYC Department of Buildings administers and enforces licensing, permitting, and
safety requirements for sign hanger contractors, including the issuance of Master and Special Sign
Hanger licenses.
Question 2
A sign measures 145 square feet on one face and weighs 1,150 pounds. Which license classification is
authorized to perform the sign-hanging work?
A. No license required
B. Special Sign Hanger
C. Master Sign Hanger only
D. Registered General Contractor
🟢 B. Special Sign Hanger
🔴 Explanation: A Special Sign Hanger may hoist, lower, hang, or attach an exterior sign not exceeding
150 square feet measured on one face and not exceeding 1,200 pounds.
Question 3
,A sign is 140 square feet but weighs 1,250 pounds. The contractor proposes to proceed under a
Special Sign Hanger license. What is the critical problem?
A. The weight exceeds the Special Sign Hanger limit
B. The area is automatically considered two faces
C. Weight is irrelevant for Special Sign Hangers
D. Only illumination determines the license
🟢 A. The weight exceeds the Special Sign Hanger limit
🔴 Explanation: Both limitations must be satisfied. Exceeding either 150 square feet or 1,200 pounds
places the sign outside the Special Sign Hanger authorization.
Question 4
Which sign is exempt from the sign hanger licensing requirement based on size and weight?
A. A 100-square-foot sign weighing 20 pounds
B. A 70-square-foot sign weighing 25 pounds
C. A 75-square-foot sign weighing 30 pounds
D. A 100-square-foot sign weighing 25 pounds
🟢 B. A 70-square-foot sign weighing 25 pounds
🔴 Explanation: One exemption applies to signs not exceeding 75 square feet measured on one face
and not exceeding 25 pounds. Both conditions must be satisfied.
Question 5
A sign is exactly 150 square feet on one face and weighs exactly 1,200 pounds. Which statement is
correct?
A. A Master Sign Hanger is required
B. It is exempt from licensing
C. A Special Sign Hanger may perform the work
D. Only an electrician may install it
, 🟢 C. A Special Sign Hanger may perform the work
🔴 Explanation: The statutory thresholds use "not exceeding," so a sign exactly at both limits remains
within Special Sign Hanger authorization.
Question 6
What document authorizes a licensed sign hanger to perform sign installation work in NYC?
A. Certificate of Occupancy
B. Sign Hanger License
C. Business Certificate
D. Work Order
🟢 B. Sign Hanger License
🔴 Explanation: A valid NYC Sign Hanger License authorizes installation, maintenance, and removal of
signs in accordance with DOB regulations.
Question 7
Who must notify DOB before beginning permitted sign work?
A. The property owner
B. The licensed sign hanger
C. The sign manufacturer
D. The building superintendent
🟢 B. The licensed sign hanger
🔴 Explanation: The licensed sign hanger is responsible for notifying DOB and ensuring that all permit
conditions are met before commencing work.
Question 8
