CHST Exam Domain 1 (Hazard and Risk Identification and
Control) with all Correct & 100% Verified Answers |Latest
Version |Already Graded A+
A worker is performing a task in an area that requires a fire extinguisher to be accessible. The
potential hazards in the area are combustibles, liquids, and electrical equipment. Which type of
fire extinguisher is needed for this work? ✔Correct Answer-Type ABC
Which is included under fall protection? ✔Correct Answer-Fall arrest systems
With regards to fall protection, which is the generally accepted hierarchy of controls?
✔Correct Answer-Eliminate the risk, guard the hazard, protect the worker with fall protection
When performing air monitoring in a confined space, the oxygen level in the atmosphere needs
to be in which range? ✔Correct Answer-19.5 - 23.5%
Under a confined space entry program, an employer is typically responsible for the following:
Implementing measures necessary to prevent unauthorized entry, and Identifying and
evaluating hazards of the permit space before employees enter the confined spaces. Which
other action is the employer responsible for? ✔Correct Answer-Implementing the means,
procedures, and practices necessary for safe permit space entry operations
Which is the BEST method of protection from falling struck-by hazards? ✔Correct Answer-
Build a canopy or erect a net.
A safety, health, and environment auditor is observing a forklift operator who is placing a load
onto a semi-truck for delivery. Which would be an acceptable method for this operation?
✔Correct Answer-Stopping the forklift completely before lowering the load
Which BEST describes an example of a crane activity that would require a critical lift plan?
✔Correct Answer-The gross load represents more than 80% of the manufacturer's rating chart.
Which is one of the MOST frequent causes of crane injuries or deaths? ✔Correct Answer-
Outrigger failure
A crane operator is working near high voltage lines on a flat surface in a large open field. Which
conditions need to be addressed before safe operation can begin? ✔Correct Answer-Wind
speed and distance from high voltage lines
Because most manual material handling injuries occur to the arms and back, workers need to be
taught how to pick up, move, and put down heavy, bulky, awkward, or long objects. Which
Control) with all Correct & 100% Verified Answers |Latest
Version |Already Graded A+
A worker is performing a task in an area that requires a fire extinguisher to be accessible. The
potential hazards in the area are combustibles, liquids, and electrical equipment. Which type of
fire extinguisher is needed for this work? ✔Correct Answer-Type ABC
Which is included under fall protection? ✔Correct Answer-Fall arrest systems
With regards to fall protection, which is the generally accepted hierarchy of controls?
✔Correct Answer-Eliminate the risk, guard the hazard, protect the worker with fall protection
When performing air monitoring in a confined space, the oxygen level in the atmosphere needs
to be in which range? ✔Correct Answer-19.5 - 23.5%
Under a confined space entry program, an employer is typically responsible for the following:
Implementing measures necessary to prevent unauthorized entry, and Identifying and
evaluating hazards of the permit space before employees enter the confined spaces. Which
other action is the employer responsible for? ✔Correct Answer-Implementing the means,
procedures, and practices necessary for safe permit space entry operations
Which is the BEST method of protection from falling struck-by hazards? ✔Correct Answer-
Build a canopy or erect a net.
A safety, health, and environment auditor is observing a forklift operator who is placing a load
onto a semi-truck for delivery. Which would be an acceptable method for this operation?
✔Correct Answer-Stopping the forklift completely before lowering the load
Which BEST describes an example of a crane activity that would require a critical lift plan?
✔Correct Answer-The gross load represents more than 80% of the manufacturer's rating chart.
Which is one of the MOST frequent causes of crane injuries or deaths? ✔Correct Answer-
Outrigger failure
A crane operator is working near high voltage lines on a flat surface in a large open field. Which
conditions need to be addressed before safe operation can begin? ✔Correct Answer-Wind
speed and distance from high voltage lines
Because most manual material handling injuries occur to the arms and back, workers need to be
taught how to pick up, move, and put down heavy, bulky, awkward, or long objects. Which
