SAFETY CERTIFICATION EXAM QUESTIONS AND ANSWERS LATEST
UPDATE 2027
Question 1.
The first step to a job safety analysis is to:
A. Prepare a list of potential problems b. document an itemized sequence of job tasks c.
Identify the hazard of each task d. propose potential solutions to problems
Correct Answer: Document an itemized sequence of job tasks
Question 2.
What does NIOSH stand for? a. National Institute for Occupational Safety and Health b.
National Institute for Organizations Safety and Health c. Nationwide Instructions for
Occupational Safety and Health d. Nationwide Instructions for Organizational Safety and
Health
Correct Answer: National Institute for Occupational Safety and Health
Question 3.
An employee questions the quality of the materials inside a trailer and pages his/her
supervisor to come to the trailer. It is clear that the contents have been seriously damaged
in shipment. Which of the following actions is appropriate? a. Reject the load to the carrier
b. Call the inbound planner to come count the contents of the shipment c. Only accept the
undamaged portions d. Accept the load and take it to the line for use
Correct Answer: Reject the load to the carrier
Question 4.
Several federal agencies ing the workplace. enforcement of safety a. EPA b. OSHA c. DOT
d. NIOSH
Correct Answer: enforce regulations concern- OSHA The federal agency
concerned with regulations is:
Question 5.
Which of the following ladder a. The length of the b. The distance between c. Cages are
required d. When required, mum of 24" x 30"
Correct Answer: is NOT a requirement of a fixed The distance between rungs
shall exceed 16" rung has to be 16" rungs shall exceed 16" on all fixed ladders
over 20" landing platforms must be a mini-
, Question 6.
Audits of environmental or quality systems within an organization typically include all of
the following except: a. Detailed instructions on how to improve the system b. A list of
operational metrics that will be used to track performance c. Timelines for corrective
actions to be taken d. Individuals who are responsible for implementing the corrective
action
Correct Answer: Detailed instructions on how to improve the system
Question 7.
A job safety analysis should NOT be conducted by? a. A maintenance worker b. An
operator c. A project engineer d. An OSHA representative
Correct Answer: An OSHA representative
Question 8.
The risk of injury for new employees is ___ than for those with experience a. Less Likely b.
More likely c. About the same d. Exactly the same
Correct Answer: More Likely
Question 9.
In most manufacturing plants, the chance of being exposed to blood-borne pathogens is
relatively small. In these plants, the greatest risk of exposure is: a. Working with a
respirator b. Contact with bodily fluid while working with first aid c. Exposure to certain
pesticides and toxic metals d. Getting cut on a sharp surface
Correct Answer: Contact with bodily fluid while working with first aid
Question 10.
To make sure the receiver you should: a. Ask them if they b. Make them sign c. Have the
recipient own words d. None of the above
Correct Answer: has understood a message, Have the recipient rephrase what
was said in understood what you said their own words a statement that they
understood rephrase what was said in his/her
Question 11.
The primary need for training in today's manufacturing environment is: a. Job
justification/documentation b. Change in people/processes c. To receive government
money d. To involve employees
Correct Answer: Change in people/processes
UPDATE 2027
Question 1.
The first step to a job safety analysis is to:
A. Prepare a list of potential problems b. document an itemized sequence of job tasks c.
Identify the hazard of each task d. propose potential solutions to problems
Correct Answer: Document an itemized sequence of job tasks
Question 2.
What does NIOSH stand for? a. National Institute for Occupational Safety and Health b.
National Institute for Organizations Safety and Health c. Nationwide Instructions for
Occupational Safety and Health d. Nationwide Instructions for Organizational Safety and
Health
Correct Answer: National Institute for Occupational Safety and Health
Question 3.
An employee questions the quality of the materials inside a trailer and pages his/her
supervisor to come to the trailer. It is clear that the contents have been seriously damaged
in shipment. Which of the following actions is appropriate? a. Reject the load to the carrier
b. Call the inbound planner to come count the contents of the shipment c. Only accept the
undamaged portions d. Accept the load and take it to the line for use
Correct Answer: Reject the load to the carrier
Question 4.
Several federal agencies ing the workplace. enforcement of safety a. EPA b. OSHA c. DOT
d. NIOSH
Correct Answer: enforce regulations concern- OSHA The federal agency
concerned with regulations is:
Question 5.
Which of the following ladder a. The length of the b. The distance between c. Cages are
required d. When required, mum of 24" x 30"
Correct Answer: is NOT a requirement of a fixed The distance between rungs
shall exceed 16" rung has to be 16" rungs shall exceed 16" on all fixed ladders
over 20" landing platforms must be a mini-
, Question 6.
Audits of environmental or quality systems within an organization typically include all of
the following except: a. Detailed instructions on how to improve the system b. A list of
operational metrics that will be used to track performance c. Timelines for corrective
actions to be taken d. Individuals who are responsible for implementing the corrective
action
Correct Answer: Detailed instructions on how to improve the system
Question 7.
A job safety analysis should NOT be conducted by? a. A maintenance worker b. An
operator c. A project engineer d. An OSHA representative
Correct Answer: An OSHA representative
Question 8.
The risk of injury for new employees is ___ than for those with experience a. Less Likely b.
More likely c. About the same d. Exactly the same
Correct Answer: More Likely
Question 9.
In most manufacturing plants, the chance of being exposed to blood-borne pathogens is
relatively small. In these plants, the greatest risk of exposure is: a. Working with a
respirator b. Contact with bodily fluid while working with first aid c. Exposure to certain
pesticides and toxic metals d. Getting cut on a sharp surface
Correct Answer: Contact with bodily fluid while working with first aid
Question 10.
To make sure the receiver you should: a. Ask them if they b. Make them sign c. Have the
recipient own words d. None of the above
Correct Answer: has understood a message, Have the recipient rephrase what
was said in understood what you said their own words a statement that they
understood rephrase what was said in his/her
Question 11.
The primary need for training in today's manufacturing environment is: a. Job
justification/documentation b. Change in people/processes c. To receive government
money d. To involve employees
Correct Answer: Change in people/processes
