CSX Conductor Training Week 1 Test | Questions with Verified Answers & Exam Prep
Who is Responsible for making Pay Claims? Ranking Employee or Employee to be paid
What is the Hand Signal for Reduce Speed? Arm out horizontal over the track
Which of the following are allowed by the Rulebook? Always take the safe course
What is the Hand Signal for Release Air Brakes? Hand held overhead when Equipment is Standing
Who authorizes a Utility Employee to join an Assigned Ranking Employee
Crew?
What is the normal position for a switch or derail? In the "on" or derailing position
Before lining a switch or derail, an employee must? 1) Ensure that any preceeding movement has passed clearance points. 2) Ensure
that the device is not locked, spiked, or tagged "out of service"
If a lock is found to be defective or missing on a main line 1) Report device to Trainmaster/Dispatcher. 2) Be governed by the instructions of
switch or derail an employee must? said Dispatcher/Trainmaster
When an Employee determines that a switch or derail is 1) Not operate the device. 2) Report device to Proper Authority
defective, the employee must?
You are standing in a yard using multiple switches on long That all switch points are flush and aligned properly.
shoves. After lining each switch an employee should check
what?
When using a portable radio in a shove move, Employee 1) Employee is clear of all tracks. 2) Switches and Derails are all properly aligned
instructions must specify what? for the move
What is a System of Tracks, other than main tracks and Yard
sidings, used for making up trains for storing cars and
other purposes?
By Definition, what is the location in a turnout where it is Clearance Point
unsafe to pass on an adjacent track?
What is a track connection between two adjacent tracks, Crossover
not necessarily parallel, consisting of two switches whose
primary purpose is to allow crossing from one track to
another?
What is a device of "Necessary Track" used to change Switch
from one track to another?
Stuvia 2026-2027
, CSX Conductor Training Week 1 Test | Questions with Verified Answers & Exam Prep
What is the the minimum distance you must stand from a 30'
switch or derail involved in the route of a passing train?
When crossing tracks with standing equipment, what 1) Stop and check both directions. 2) Do not cross within 25' of standing equipment.
safety precautions must be taken?
In addition to facing the equipment and maintaining 3 1) Avoid getting off equipment in an unsafe area. 2)Stop at the bottom rung and
points of contact, what other steps must be taken when observe where you will be placing your foot.
disembarking moving equipment?
When crossing standing equipment you must find sufficient putting feet on coupler, air hose, anglecocks etc.
handholds and avoid?
when riding a car, maintain 3 points of contact, be Face direction of movement
prepared for unexpected movement, slack actions and?
Do not ride on a car with a grab bar that is less than 12"
___________ above the ground
What is required when riding a car approaching a close dismount the car prior to reaching the close clearance
clearance?
What can be used to clear foreign materials from a switch? 1) Broom. 2) Switch
Employees are prohibited from using alcohol... 1) On duty, or reporting for duty. 2) on CSX Property, Vehicles, or facilities provided
by CSX
When working with air hoses, which of the following apply? 1) Do not extend over the drawbar when adjusting hoses. 2) make certain that
BOTH anglecocks are closed before adjusting hoses with hands.
When handling a EOT device, an employee must... 1) Secure EOT air hose by s hook if available. 2) Do not place the EOT where it
may become a tripping hazard
When lifting objects what safety steps must be taken? 1) Never use Excessive Force. 2) Assume a balanced posture.
Your Coworker is acting in an unsafe manner, what should Warn the employee of their unsafe behavior
you do?
When must an employee report an injury? Immediately or prior to leaving CSX Property.
What hazards must be avoided when performing tasks? 1) Pinch Points. 2) Excessive Force
Stuvia 2026-2027
Who is Responsible for making Pay Claims? Ranking Employee or Employee to be paid
What is the Hand Signal for Reduce Speed? Arm out horizontal over the track
Which of the following are allowed by the Rulebook? Always take the safe course
What is the Hand Signal for Release Air Brakes? Hand held overhead when Equipment is Standing
Who authorizes a Utility Employee to join an Assigned Ranking Employee
Crew?
What is the normal position for a switch or derail? In the "on" or derailing position
Before lining a switch or derail, an employee must? 1) Ensure that any preceeding movement has passed clearance points. 2) Ensure
that the device is not locked, spiked, or tagged "out of service"
If a lock is found to be defective or missing on a main line 1) Report device to Trainmaster/Dispatcher. 2) Be governed by the instructions of
switch or derail an employee must? said Dispatcher/Trainmaster
When an Employee determines that a switch or derail is 1) Not operate the device. 2) Report device to Proper Authority
defective, the employee must?
You are standing in a yard using multiple switches on long That all switch points are flush and aligned properly.
shoves. After lining each switch an employee should check
what?
When using a portable radio in a shove move, Employee 1) Employee is clear of all tracks. 2) Switches and Derails are all properly aligned
instructions must specify what? for the move
What is a System of Tracks, other than main tracks and Yard
sidings, used for making up trains for storing cars and
other purposes?
By Definition, what is the location in a turnout where it is Clearance Point
unsafe to pass on an adjacent track?
What is a track connection between two adjacent tracks, Crossover
not necessarily parallel, consisting of two switches whose
primary purpose is to allow crossing from one track to
another?
What is a device of "Necessary Track" used to change Switch
from one track to another?
Stuvia 2026-2027
, CSX Conductor Training Week 1 Test | Questions with Verified Answers & Exam Prep
What is the the minimum distance you must stand from a 30'
switch or derail involved in the route of a passing train?
When crossing tracks with standing equipment, what 1) Stop and check both directions. 2) Do not cross within 25' of standing equipment.
safety precautions must be taken?
In addition to facing the equipment and maintaining 3 1) Avoid getting off equipment in an unsafe area. 2)Stop at the bottom rung and
points of contact, what other steps must be taken when observe where you will be placing your foot.
disembarking moving equipment?
When crossing standing equipment you must find sufficient putting feet on coupler, air hose, anglecocks etc.
handholds and avoid?
when riding a car, maintain 3 points of contact, be Face direction of movement
prepared for unexpected movement, slack actions and?
Do not ride on a car with a grab bar that is less than 12"
___________ above the ground
What is required when riding a car approaching a close dismount the car prior to reaching the close clearance
clearance?
What can be used to clear foreign materials from a switch? 1) Broom. 2) Switch
Employees are prohibited from using alcohol... 1) On duty, or reporting for duty. 2) on CSX Property, Vehicles, or facilities provided
by CSX
When working with air hoses, which of the following apply? 1) Do not extend over the drawbar when adjusting hoses. 2) make certain that
BOTH anglecocks are closed before adjusting hoses with hands.
When handling a EOT device, an employee must... 1) Secure EOT air hose by s hook if available. 2) Do not place the EOT where it
may become a tripping hazard
When lifting objects what safety steps must be taken? 1) Never use Excessive Force. 2) Assume a balanced posture.
Your Coworker is acting in an unsafe manner, what should Warn the employee of their unsafe behavior
you do?
When must an employee report an injury? Immediately or prior to leaving CSX Property.
What hazards must be avoided when performing tasks? 1) Pinch Points. 2) Excessive Force
Stuvia 2026-2027
