Georgia Elevator Mechanic Licensure 2026/2027 Exam Questions And Correct Answers With Rationales

GEORGIA ELEVATOR MECHANIC LICENSURE 2026/2027
EXAM QUESTIONS AND CORRECT ANSWERS WITH
RATIONALES
Core Domains
ASME A17.1 Safety Code and Georgia Amendments
Elevator Mechanic Certification Classes (I, IR, II, III, IIIR)
Electrical Systems and Motor Control (NEC Article 620)
Mechanical Components and Safety Devices
Hydraulic Elevator Systems
Inspection, Testing, and Maintenance Procedures
OSHA and Workplace Safety Standards
Record Keeping and Regulatory Compliance
Introduction
This assessment evaluates the candidate's mastery of essential concepts,
regulations, and practical skills required for elevator mechanic licensure in
Georgia. It measures knowledge of the ASME A17.1 Safety Code, Georgia-specific
amendments, electrical and mechanical systems, safety device operation, and
inspection procedures. The exam employs multiple-choice questions designed to
simulate real-world scenarios encountered by elevator mechanics in the field.
Emphasis is placed on applying knowledge to diagnose faults, ensure code
compliance, and maintain safe operating conditions for elevators, escalators, and
related conveyance equipment. Success requires understanding of certification
class limitations, continuing education requirements, and the regulatory
framework administered by the Office of Insurance and Safety Fire Commissioner.
Section One: Questions 1–50
1. Under Georgia's elevator regulations, which certification class authorizes a
mechanic to install, alter, service, repair, test, maintain, and perform
electrical work on elevators and related conveyance equipment?
A. Class II
B. Class III

,C. Class I
D. Class IIIR
C

RATIONALE: Class I elevator mechanic certification authorizes installation,
servicing, repair, testing, maintenance, and electrical work on elevators and related
conveyance equipment covered by Georgia rules .
2. Which standard is the principal safety code adopted by Georgia for
elevators, escalators, dumbwaiters, and moving walks?
A. NFPA 13
B. NFPA 70
C. ASME A17.1
D. ICC A117.1
C
RATIONALE: Georgia's elevator rules adopt ASME A17.1 as the principal
safety code, currently identified as the 2019 edition subject to Georgia
amendments .
3. Which ASME publication is specifically identified by Georgia as the
Inspector's Manual for Elevators?
A. A17.1
B. A17.2
C. A17.3
D. A18.1
B

RATIONALE: Georgia identifies ASME A17.2 as the Inspector's Manual for
Elevators and requires certified inspectors to use the latest adopted edition .
4. What is the primary purpose of the Georgia elevator regulations?
A. Establish maximum elevator speeds for every building
B. Establish only electrical installation requirements
C. Establish minimum safety standards intended to prevent loss of life, injury, and

,structural damage
D. Regulate only elevator manufacturers
C

RATIONALE: The Georgia rules state their purpose is to establish minimum
fire-safety codes and standards for elevators and escalators and promote public
safety and consumer protection .
5. Which state agency oversees elevator mechanic certification in Georgia?
A. Georgia Department of Labor
B. Office of Insurance and Safety Fire Commissioner (OCI)
C. Georgia Secretary of State
D. Georgia Department of Community Affairs
B

RATIONALE: The Office of Insurance and Safety Fire Commissioner (OCI),
through its Engineering Division, oversees elevator mechanic certification under
Rule 120-3-25 .
6. How many classes of elevator mechanic certification does Georgia offer?
A. One class
B. Two classes
C. Three classes
D. Four classes
C

RATIONALE: Georgia offers three classes: Class I (full scope), Class II
(maintenance/repair only), and Class IIIR (residential) .
7. What is the minimum passing score required on the Georgia elevator
mechanic certification exam?
A. 60%
B. 65%
C. 70%
D. 80%
C

, RATIONALE: Georgia requires a minimum passing score of 70% on the
elevator mechanic certification exam for all certification classes .
8. How often must Georgia elevator mechanic certifications be renewed?
A. Annually
B. Biannually (every 2 years)
C. Every 3 years
D. Every 5 years
B

RATIONALE: Georgia elevator mechanic certifications must be renewed
biannually, with all certifications expiring on July 1 not more than two years from
date of issue .
9. What is the minimum annual continuing education requirement for
Georgia elevator mechanic certification?
A. 4 hours
B. 8 hours
C. 12 hours
D. 16 hours
B
RATIONALE: Georgia requires documentation of training, certification and
classes successfully completed in the previous year with a minimum of eight (8)
hours, including Code updates .
10. How many years of experience are required for a Georgia Class IIIR
elevator mechanic certification?
A. 1 year
B. 2 years
C. 3 years
D. 5 years
A