PREPIQ FLORIDA FL STANDARD MODULAR INSPECTOR
ULTIMATE EXAM (PDF) | 2026 QUESTIONS & ANSWERS +
RATIONALES | STUDY GUIDE | 100% CORRECT
1. According to the Florida DBPR examination bulletin, what is the content weighting for the
Building domain on the Florida Modular Building Inspector exam?
A) 17%
B) 21%
C) 33%
D) 8%
Correct Answer: 33%
Rationale: The official examination bulletin specifies that the Building domain accounts for 33%
of the total exam content. The remaining distribution is Plumbing at 21%, Electrical at 21%,
Florida Codes and Standards at 17%, and Mechanical at 8%.
2. What is the primary purpose of tie-down systems in modular construction?
A) To provide proper electrical grounding
B) To secure the building against wind and seismic forces
C) To improve thermal insulation
D) To support interior partitions
Correct Answer: To secure the building against wind and seismic forces
Rationale: Tie-down systems are installed to firmly secure modular buildings to their
foundations, ensuring stability during high winds and seismic events. This is critical in Florida's
hurricane-prone regions where lateral forces can compromise structural integrity.
3. In verifying compliance with structural design standards, the inspector should confirm that the
load path is:
A) Continuous from the roof to the foundation
B) Only supporting non-load-bearing partitions
C) Provided for interior finish attachments
D) Designed exclusively for aesthetic appeal
Correct Answer: Continuous from the roof to the foundation
Rationale: A continuous load path ensures that forces from wind, seismic activity, and other
loads are safely transferred from the roof through the walls to the foundation. Any break in this
path compromises the building's structural integrity.
4. The local building official can perform a plan review of the modular building portion of a
permitted project and can levy fees for the plan review.
,A) True
B) False
Correct Answer: False
Rationale: The local building department can review the building when reviewing the foundation
and all other site-related portions, but cannot levy a fee for the review of the modular building.
Modular buildings have already been reviewed by a Department-approved Third Party Agency,
and the manufacturer has paid a fee for that review.
5. In State Statute 553.36 definitions, a component can be a window, door, or an appliance (e.g.,
a refrigerator, stove, or furniture).
A) True
B) False
Correct Answer: True
Rationale: All components as defined in SS 553.36 are three-dimensional systems used as part of
a modular building and cannot be removed without affecting the DBPR approval status of the
building. This includes windows, doors, and appliances.
6. A modular building can be installed on a mobile home (HUD) foundation system and be
considered Florida Building Code compliant.
A) True
B) False
Correct Answer: False
Rationale: HUD foundation components and designs have not been tested according to the
Florida Building Code and do not comply with SS 553.36(6) or SS 553.842. Modular buildings
must be installed on foundations that meet Florida Building Code requirements.
7. In-plant modular building constructed buildings do not have to comply with a local
jurisdiction's amendments to the Florida Building Code.
A) True
B) False
Correct Answer: True
Rationale: Modular buildings must comply with the Florida Building Code but are exempt from
local amendments to the code pursuant to SS 553.37(4). This ensures uniformity across the state
for modular construction standards.
8. Modular buildings can be installed on a wood foundation.
A) True
B) False
Correct Answer: True
, Rationale: Modular buildings can be installed on any foundation system referenced in the Florida
Building Code. Wood foundations are referenced in FBC 1807.1.4 "Permanent wood foundation
systems."
9. An existing moved modular building constructed prior to March 01, 2002 must be installed
using the wind speed from:
A) The building code in effect when moved
B) The Southern Standard Building Code
C) The 2001 Florida Building Code
D) The 2004 Florida Building Code
Correct Answer: The building code in effect when moved
Rationale: The installation should be in accordance with the code to which the modular was
constructed, as specified in FBC 102.7 2 "Relocation of manufactured buildings" and FAC 61-
41.011(5) "A relocated manufactured building..."
10. A screened porch addition can have the interior wall of the porch be supported by the
modular building if an engineer designs the addition with the modular foundation.
A) Yes if designed by an engineer that validates the design of the modular will support the
additional loads, but the insignia must be returned to DBPR
B) Yes if the engineer that designed the modular designs the foundation and addition
C) Yes as long as structural calculations are submitted to the Building Official validating the
foundation structural soundness will support the modular and the porch
D) No, a modular exterior wall cannot be used to support additional loads
Correct Answer: Yes if designed by an engineer that validates the design of the modular will
support the additional loads, but the insignia must be returned to DBPR
Rationale: The modular is a Florida Building Code compliant design in accordance with
American Society of Civil Engineers (ASCE), but the department did not approve it that way,
and the insignia must be returned to the Department pursuant to FAC 61-41.011(3).
11. Once a new code cycle is in effect, a modular can be installed using the previous edition of
the code for:
A) One year from the effective date of the new code
B) One hundred eighty days from the effective date of the new code
C) One hundred eighty days from the date of sale of the modular prior to the effective date of the
new code
D) One hundred eighty days
Correct Answer: One hundred eighty days from the date of sale of the modular prior to the
effective date of the new code
Rationale: FBC 105.3.7 allows a modular to be built 180 days after the sale when a code cycle
changes. This provides a transition period for manufacturers and installers.
ULTIMATE EXAM (PDF) | 2026 QUESTIONS & ANSWERS +
RATIONALES | STUDY GUIDE | 100% CORRECT
1. According to the Florida DBPR examination bulletin, what is the content weighting for the
Building domain on the Florida Modular Building Inspector exam?
A) 17%
B) 21%
C) 33%
D) 8%
Correct Answer: 33%
Rationale: The official examination bulletin specifies that the Building domain accounts for 33%
of the total exam content. The remaining distribution is Plumbing at 21%, Electrical at 21%,
Florida Codes and Standards at 17%, and Mechanical at 8%.
2. What is the primary purpose of tie-down systems in modular construction?
A) To provide proper electrical grounding
B) To secure the building against wind and seismic forces
C) To improve thermal insulation
D) To support interior partitions
Correct Answer: To secure the building against wind and seismic forces
Rationale: Tie-down systems are installed to firmly secure modular buildings to their
foundations, ensuring stability during high winds and seismic events. This is critical in Florida's
hurricane-prone regions where lateral forces can compromise structural integrity.
3. In verifying compliance with structural design standards, the inspector should confirm that the
load path is:
A) Continuous from the roof to the foundation
B) Only supporting non-load-bearing partitions
C) Provided for interior finish attachments
D) Designed exclusively for aesthetic appeal
Correct Answer: Continuous from the roof to the foundation
Rationale: A continuous load path ensures that forces from wind, seismic activity, and other
loads are safely transferred from the roof through the walls to the foundation. Any break in this
path compromises the building's structural integrity.
4. The local building official can perform a plan review of the modular building portion of a
permitted project and can levy fees for the plan review.
,A) True
B) False
Correct Answer: False
Rationale: The local building department can review the building when reviewing the foundation
and all other site-related portions, but cannot levy a fee for the review of the modular building.
Modular buildings have already been reviewed by a Department-approved Third Party Agency,
and the manufacturer has paid a fee for that review.
5. In State Statute 553.36 definitions, a component can be a window, door, or an appliance (e.g.,
a refrigerator, stove, or furniture).
A) True
B) False
Correct Answer: True
Rationale: All components as defined in SS 553.36 are three-dimensional systems used as part of
a modular building and cannot be removed without affecting the DBPR approval status of the
building. This includes windows, doors, and appliances.
6. A modular building can be installed on a mobile home (HUD) foundation system and be
considered Florida Building Code compliant.
A) True
B) False
Correct Answer: False
Rationale: HUD foundation components and designs have not been tested according to the
Florida Building Code and do not comply with SS 553.36(6) or SS 553.842. Modular buildings
must be installed on foundations that meet Florida Building Code requirements.
7. In-plant modular building constructed buildings do not have to comply with a local
jurisdiction's amendments to the Florida Building Code.
A) True
B) False
Correct Answer: True
Rationale: Modular buildings must comply with the Florida Building Code but are exempt from
local amendments to the code pursuant to SS 553.37(4). This ensures uniformity across the state
for modular construction standards.
8. Modular buildings can be installed on a wood foundation.
A) True
B) False
Correct Answer: True
, Rationale: Modular buildings can be installed on any foundation system referenced in the Florida
Building Code. Wood foundations are referenced in FBC 1807.1.4 "Permanent wood foundation
systems."
9. An existing moved modular building constructed prior to March 01, 2002 must be installed
using the wind speed from:
A) The building code in effect when moved
B) The Southern Standard Building Code
C) The 2001 Florida Building Code
D) The 2004 Florida Building Code
Correct Answer: The building code in effect when moved
Rationale: The installation should be in accordance with the code to which the modular was
constructed, as specified in FBC 102.7 2 "Relocation of manufactured buildings" and FAC 61-
41.011(5) "A relocated manufactured building..."
10. A screened porch addition can have the interior wall of the porch be supported by the
modular building if an engineer designs the addition with the modular foundation.
A) Yes if designed by an engineer that validates the design of the modular will support the
additional loads, but the insignia must be returned to DBPR
B) Yes if the engineer that designed the modular designs the foundation and addition
C) Yes as long as structural calculations are submitted to the Building Official validating the
foundation structural soundness will support the modular and the porch
D) No, a modular exterior wall cannot be used to support additional loads
Correct Answer: Yes if designed by an engineer that validates the design of the modular will
support the additional loads, but the insignia must be returned to DBPR
Rationale: The modular is a Florida Building Code compliant design in accordance with
American Society of Civil Engineers (ASCE), but the department did not approve it that way,
and the insignia must be returned to the Department pursuant to FAC 61-41.011(3).
11. Once a new code cycle is in effect, a modular can be installed using the previous edition of
the code for:
A) One year from the effective date of the new code
B) One hundred eighty days from the effective date of the new code
C) One hundred eighty days from the date of sale of the modular prior to the effective date of the
new code
D) One hundred eighty days
Correct Answer: One hundred eighty days from the date of sale of the modular prior to the
effective date of the new code
Rationale: FBC 105.3.7 allows a modular to be built 180 days after the sale when a code cycle
changes. This provides a transition period for manufacturers and installers.
