CHST Exam Study with all Correct & 100% Verified Answers |Actual
Complete Update |Already Graded A+
Pdate |
1. Which of the following is NOT a significant factor in The amount of electrically
re-
determining the impact of an electrocution eventsistant material present in
on a worker? work boots and work
2. A Hearing Conservation Program is required gloves
un-der OSHA regulation 29 CFR 1926.52
(Occupation-al Noise Exposure) when workers decibels (dB)
are exposed to noise levels in excess of an eight-
hour time-weight-ed average of .
3. Per 29 CFR 1926.1101, the concentration of
as-bestos fibers foran eight-hour exposure is
not to exceed which of the following?
fibers per cubic centimeter
of air
4. Per OSHA regulation 29 CFR 1926.1053, the interval no greater than 50 feet
between landing platforms on a fixed ladder
that uses a cage or well with multiple ladder
sections must be .
5. How long must an employer keep information Thirty (30) years
for a chemical that an employee was exposed
to and received medical treatment for?
6. In a construction environment, which of the follow- Safety goggles
ing types of PPE is most suitable for protecting
the eyes from dust?
7. How frequently must electrical insulating gloves be Every six months
tested toensure they adequately protect
workers against electrical shock?
8. The demolition subcontractor hired for an A "tailgate" review of site-
office building project has worked together
with the spe-cific hazards
, CHST Exam Study with all Correct & 100% Verified Answers |Actual
Complete Update |Already Graded A+
Pdate |
prime contractor for a few years and
specializes in this type of work. As the prime
contractor's safe-ty professional, you review
their safety program, which is comprehensive,
has current training logs, and shows less than
one first aid injury for every two jobs. Which of
the following methods would be most
appropriate to deliver the site-specific safety
training?
9. During the finishing stages of a project, what is the Fire
hazard presented when painters and
electricians are finishing in the same room?
10. If a five-foot-deep trench is dug in clay 53 degrees
material, what angle must the trench wall
not exceed?
11. Lifting index (LI) is calculated by which of the ℎ5÷5?ℎ5a5_\
fol-lowing? a55RNY55PQV55\
d5Z5Z5R5VZ5V5aR5T
12. Based on the hierarchy of controls, which 5[5Q
should be the FIRST measure implemented to
reduce a painter's exposure to volatile organic
compounds (VOCs) found in oil-based paint?
Replace the paint with a
wa-ter-based
formulation.
13. Which of the following does a mobile-crane opera- The width of the jib
tor NOT need to be aware of in order to ensure
a safe lift?
14. To what part of the body does a body harness typi- Lower back
cally NOT distribute any significant fall arrest force?
15. Recommended weight limit (RWL) is most
accurate-ly defined as which of the following?
,CHST Exam Study with all Correct & 100% Verified Answers |Actual Complete
Update |Already Graded A+
The maximum weight that
healthy workers could
safely lift for up to eight
16. Which of the following is the LEAST effective hours
method for identifying injury trends at a job
site? Reviewing medical billing
17. All of the following must be checked on a records
monthly inspection of a portable fire
extinguisher EXCEPT that the: Exterior paint is not chipped
18. When researching regulatory requirements, where The Department of
Labor's
is the most reliable source of current OSHA stan-website
dards?
19. Which of the following hazards accounts for
the highest fatality rate in the construction Falls
industry?
20. According to 29 CFR 1926.651, a stairway, Four
ladder, ramp, or other safe means of egress
shall be locat-ed in trench excavations that are
feet or
more in depth.a.four
21. Excavation cave-in protection is required The excavation mainly com-
under which of the following conditions?
prises clay or silt and is
five feet in depth.
22. What level of electrical current is enough to poten- 75 milliamperes
tially result in death?
23. Which of the following is the most common control Hard
hat used to prevent injuries caused by objects
striking workers?
, CHST Exam Study with all Correct & 100% Verified Answers |Actual Complete
Update |Already Graded A+
24. Which of the following is NOT an effective strategy Applying high-visibility
reflec-to prevent injuries caused by objects falling from a tors on the
scattold legs scaffold?
25. Per OSHA regulation 29 CFR 1926.502, when a 39 inches
200-pound load is applied in a downward
direction to the top edge of a guardrail, it shall
not deflect to a height any less than above
the walking or working level.
26. Which of the following is NOT a sensor available for Asbestos
a multi-gas meter?
27. Which of the following tests is used to check The ring test
for cracks in a grinding wheel before use?
28. How does a safety professional identify
The jobs that have resulted in
which
job(s) would be appropriate for a formal job hazard injury or have the potential
for
analysis? severe injury
29. Electrical bonding is best defined as: Connecting two or more ob-
jects with a conductor
30. According to OSHA regulation 29 CFR 1926.302,
the 30 compressed-air pressure limit for cleaning
opera-tions shall not exceed psi.
31. Which of the following materials or objects is Ventilation ducts
NOT typically used for electrical grounding?
32. Anchor points for personal fall arrest
equipment should be capable of holding 5,000
pounds
per person.
Complete Update |Already Graded A+
Pdate |
1. Which of the following is NOT a significant factor in The amount of electrically
re-
determining the impact of an electrocution eventsistant material present in
on a worker? work boots and work
2. A Hearing Conservation Program is required gloves
un-der OSHA regulation 29 CFR 1926.52
(Occupation-al Noise Exposure) when workers decibels (dB)
are exposed to noise levels in excess of an eight-
hour time-weight-ed average of .
3. Per 29 CFR 1926.1101, the concentration of
as-bestos fibers foran eight-hour exposure is
not to exceed which of the following?
fibers per cubic centimeter
of air
4. Per OSHA regulation 29 CFR 1926.1053, the interval no greater than 50 feet
between landing platforms on a fixed ladder
that uses a cage or well with multiple ladder
sections must be .
5. How long must an employer keep information Thirty (30) years
for a chemical that an employee was exposed
to and received medical treatment for?
6. In a construction environment, which of the follow- Safety goggles
ing types of PPE is most suitable for protecting
the eyes from dust?
7. How frequently must electrical insulating gloves be Every six months
tested toensure they adequately protect
workers against electrical shock?
8. The demolition subcontractor hired for an A "tailgate" review of site-
office building project has worked together
with the spe-cific hazards
, CHST Exam Study with all Correct & 100% Verified Answers |Actual
Complete Update |Already Graded A+
Pdate |
prime contractor for a few years and
specializes in this type of work. As the prime
contractor's safe-ty professional, you review
their safety program, which is comprehensive,
has current training logs, and shows less than
one first aid injury for every two jobs. Which of
the following methods would be most
appropriate to deliver the site-specific safety
training?
9. During the finishing stages of a project, what is the Fire
hazard presented when painters and
electricians are finishing in the same room?
10. If a five-foot-deep trench is dug in clay 53 degrees
material, what angle must the trench wall
not exceed?
11. Lifting index (LI) is calculated by which of the ℎ5÷5?ℎ5a5_\
fol-lowing? a55RNY55PQV55\
d5Z5Z5R5VZ5V5aR5T
12. Based on the hierarchy of controls, which 5[5Q
should be the FIRST measure implemented to
reduce a painter's exposure to volatile organic
compounds (VOCs) found in oil-based paint?
Replace the paint with a
wa-ter-based
formulation.
13. Which of the following does a mobile-crane opera- The width of the jib
tor NOT need to be aware of in order to ensure
a safe lift?
14. To what part of the body does a body harness typi- Lower back
cally NOT distribute any significant fall arrest force?
15. Recommended weight limit (RWL) is most
accurate-ly defined as which of the following?
,CHST Exam Study with all Correct & 100% Verified Answers |Actual Complete
Update |Already Graded A+
The maximum weight that
healthy workers could
safely lift for up to eight
16. Which of the following is the LEAST effective hours
method for identifying injury trends at a job
site? Reviewing medical billing
17. All of the following must be checked on a records
monthly inspection of a portable fire
extinguisher EXCEPT that the: Exterior paint is not chipped
18. When researching regulatory requirements, where The Department of
Labor's
is the most reliable source of current OSHA stan-website
dards?
19. Which of the following hazards accounts for
the highest fatality rate in the construction Falls
industry?
20. According to 29 CFR 1926.651, a stairway, Four
ladder, ramp, or other safe means of egress
shall be locat-ed in trench excavations that are
feet or
more in depth.a.four
21. Excavation cave-in protection is required The excavation mainly com-
under which of the following conditions?
prises clay or silt and is
five feet in depth.
22. What level of electrical current is enough to poten- 75 milliamperes
tially result in death?
23. Which of the following is the most common control Hard
hat used to prevent injuries caused by objects
striking workers?
, CHST Exam Study with all Correct & 100% Verified Answers |Actual Complete
Update |Already Graded A+
24. Which of the following is NOT an effective strategy Applying high-visibility
reflec-to prevent injuries caused by objects falling from a tors on the
scattold legs scaffold?
25. Per OSHA regulation 29 CFR 1926.502, when a 39 inches
200-pound load is applied in a downward
direction to the top edge of a guardrail, it shall
not deflect to a height any less than above
the walking or working level.
26. Which of the following is NOT a sensor available for Asbestos
a multi-gas meter?
27. Which of the following tests is used to check The ring test
for cracks in a grinding wheel before use?
28. How does a safety professional identify
The jobs that have resulted in
which
job(s) would be appropriate for a formal job hazard injury or have the potential
for
analysis? severe injury
29. Electrical bonding is best defined as: Connecting two or more ob-
jects with a conductor
30. According to OSHA regulation 29 CFR 1926.302,
the 30 compressed-air pressure limit for cleaning
opera-tions shall not exceed psi.
31. Which of the following materials or objects is Ventilation ducts
NOT typically used for electrical grounding?
32. Anchor points for personal fall arrest
equipment should be capable of holding 5,000
pounds
per person.
