NCCCO CORE EXAM ACTUAL EXAM 2026 || MOST
RECENT EXAM 2026|2027 ACTUAL COMPLETE REAL
EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCESS!! NEWEST EXAM | JUST
RELEASED!!
What is prohibited by OSHA 1926 Subpart CC regarding wire rope on
a crane?
A. Lubricating the rope
B. Splicing the wire rope
C. Inspecting the rope
D. Measuring rope diameter
Answer: B. Splicing the wire rope
Rationale: OSHA requirements prohibit splicing certain crane wire
ropes because a splice can compromise the rope's designed strength
and reliability. Damaged or unacceptable rope must be handled
according to the applicable manufacturer and regulatory
requirements.
What should be a major concern when considering surfaces for crane
setup locations?
A. Paint markings
B. Traffic signs
,C. Voids, tanks, loose fill, and depressions
D. Nearby office buildings
Answer: C. Voids, tanks, loose fill, and depressions
Rationale: Subsurface conditions can significantly affect crane
stability. Voids, tanks, loose fill, and depressions may fail under the
concentrated pressure imposed by outriggers or crawlers.
Which items are included in the suspended weight when calculating
parts of line?
A. Load weight, rigging, and load block
B. Counterweight and fuel
C. Boom and carrier
D. Cab and engine
Answer: A. Load weight, rigging, and load block
Rationale: The suspended load includes the object being lifted together
with applicable load-handling devices such as rigging and the load
block. These weights must be considered when determining the
required parts of line.
What site condition must an operator be concerned about before
setting up a crane?
A. Availability of parking
B. Color of the ground surface
,C. Distance to the office
D. Soil stability must be sufficient
Answer: D. Soil stability must be sufficient
Rationale: The supporting surface must have adequate strength and
stability to support the crane and its imposed loads. Inadequate soil
conditions can result in settlement, outrigger failure, or crane
overturning.
Which is an example of a duty-cycle crane operation?
A. High-speed concrete placement
B. Occasional equipment relocation
C. Slow positioning of a light load
D. Short-distance empty travel
Answer: A. High-speed concrete placement
Rationale: Duty-cycle operations involve repetitive, rapid crane
movements, such as high-speed concrete placement. These operations
can impose different stresses than conventional lifting.
Where must barriers be erected in accessible areas to provide
protection in the crane's work area?
A. Around the operator's seat
B. At the job-site entrance
, C. Within the equipment's rotating superstructure
D. Only around the counterweight
Answer: C. Within the equipment's rotating superstructure
Rationale: The rotating superstructure creates a potential crushing or
struck-by hazard. Barriers or other protective measures are used to
prevent personnel from entering hazardous accessible areas.
According to ASME B30.5, how frequently is a crane operator
required to have a physical?
A. Every year
B. Every 3 years
C. Every 5 years
D. Every 10 years
Answer: B. Every 3 years
Rationale: The supplied study material identifies a three-year interval.
Operators should always verify the current applicable standard,
employer requirements, and medical-certification requirements.
What is the result of rapid hoist acceleration?
A. It eliminates dynamic loading
B. It reduces the load radius
C. It lowers hook tension
D. It can produce hook loads higher than the actual weight
RECENT EXAM 2026|2027 ACTUAL COMPLETE REAL
EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCESS!! NEWEST EXAM | JUST
RELEASED!!
What is prohibited by OSHA 1926 Subpart CC regarding wire rope on
a crane?
A. Lubricating the rope
B. Splicing the wire rope
C. Inspecting the rope
D. Measuring rope diameter
Answer: B. Splicing the wire rope
Rationale: OSHA requirements prohibit splicing certain crane wire
ropes because a splice can compromise the rope's designed strength
and reliability. Damaged or unacceptable rope must be handled
according to the applicable manufacturer and regulatory
requirements.
What should be a major concern when considering surfaces for crane
setup locations?
A. Paint markings
B. Traffic signs
,C. Voids, tanks, loose fill, and depressions
D. Nearby office buildings
Answer: C. Voids, tanks, loose fill, and depressions
Rationale: Subsurface conditions can significantly affect crane
stability. Voids, tanks, loose fill, and depressions may fail under the
concentrated pressure imposed by outriggers or crawlers.
Which items are included in the suspended weight when calculating
parts of line?
A. Load weight, rigging, and load block
B. Counterweight and fuel
C. Boom and carrier
D. Cab and engine
Answer: A. Load weight, rigging, and load block
Rationale: The suspended load includes the object being lifted together
with applicable load-handling devices such as rigging and the load
block. These weights must be considered when determining the
required parts of line.
What site condition must an operator be concerned about before
setting up a crane?
A. Availability of parking
B. Color of the ground surface
,C. Distance to the office
D. Soil stability must be sufficient
Answer: D. Soil stability must be sufficient
Rationale: The supporting surface must have adequate strength and
stability to support the crane and its imposed loads. Inadequate soil
conditions can result in settlement, outrigger failure, or crane
overturning.
Which is an example of a duty-cycle crane operation?
A. High-speed concrete placement
B. Occasional equipment relocation
C. Slow positioning of a light load
D. Short-distance empty travel
Answer: A. High-speed concrete placement
Rationale: Duty-cycle operations involve repetitive, rapid crane
movements, such as high-speed concrete placement. These operations
can impose different stresses than conventional lifting.
Where must barriers be erected in accessible areas to provide
protection in the crane's work area?
A. Around the operator's seat
B. At the job-site entrance
, C. Within the equipment's rotating superstructure
D. Only around the counterweight
Answer: C. Within the equipment's rotating superstructure
Rationale: The rotating superstructure creates a potential crushing or
struck-by hazard. Barriers or other protective measures are used to
prevent personnel from entering hazardous accessible areas.
According to ASME B30.5, how frequently is a crane operator
required to have a physical?
A. Every year
B. Every 3 years
C. Every 5 years
D. Every 10 years
Answer: B. Every 3 years
Rationale: The supplied study material identifies a three-year interval.
Operators should always verify the current applicable standard,
employer requirements, and medical-certification requirements.
What is the result of rapid hoist acceleration?
A. It eliminates dynamic loading
B. It reduces the load radius
C. It lowers hook tension
D. It can produce hook loads higher than the actual weight
