NACE CIP Level 1 Sample Quizes Frequently Tested Actual
Questions and Answers
Question 1.
All corrosion of iron at normal ambient conditions is
Correct Answer: an electrochemical process
Question 2.
The cathode of a corrosion cell
Correct Answer: has an opposite electrical polarity to the anode
Question 3.
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can
be used effectively as galvanic anodes for carbon steel?
Correct Answer: Zinc, aluminum, magnesium
Question 4.
A corrosion inhibitor is a substance that, when added to an environment
Correct Answer: decreases the rate of corrosion
Question 5.
A decrease in temperature will generally cause the corrosion rate to
Correct Answer: decrease
Question 6.
The electrolyte is the solution that carries (conducts)
Correct Answer: the anion, and the cations
Question 7.
While oxidation occurs at the anode, reduction occurs at the cathode
Correct Answer: true
Question 8.
The four elements of a corrosion cell are anode, the cathode, the electrode, and the
metallic pathway
Correct Answer: False
, Question 9.
The anode is the
Correct Answer: part of the metal that corrodes
Question 10.
General corrosion is described as
Correct Answer: uniform loss of thickness over the exposed surface
Question 11.
In order to reach consensus and to resolve conflict on the job, the NACE Inspector's
preferred course of action is to
Correct Answer: actively listen and endeavor to understand the postions of
others.
Question 12.
A proper coating specification should contain information regarding
Correct Answer: surface preparation standards, safety, locations to be coated
Question 13.
According to the NACE attestation, it's OK to accept a gift from a contractor as long as the
gift is below the value identified in your company policy.
Correct Answer: false
Question 14.
If an inspector finds discrepancies between the specification and the coating
manufacturers technical data sheet, the preferred coarse of action is to
Correct Answer: seek written clarification from the specifier
Question 15.
All of the following are generally included within inspection reports EXCEPT
Correct Answer: cost information
Question 16.
Inspectors reports provide sufficient detail permitting the owner to evaluate
Correct Answer: contractor's performance, inspector's performance, job
progress, work interruptions
Questions and Answers
Question 1.
All corrosion of iron at normal ambient conditions is
Correct Answer: an electrochemical process
Question 2.
The cathode of a corrosion cell
Correct Answer: has an opposite electrical polarity to the anode
Question 3.
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can
be used effectively as galvanic anodes for carbon steel?
Correct Answer: Zinc, aluminum, magnesium
Question 4.
A corrosion inhibitor is a substance that, when added to an environment
Correct Answer: decreases the rate of corrosion
Question 5.
A decrease in temperature will generally cause the corrosion rate to
Correct Answer: decrease
Question 6.
The electrolyte is the solution that carries (conducts)
Correct Answer: the anion, and the cations
Question 7.
While oxidation occurs at the anode, reduction occurs at the cathode
Correct Answer: true
Question 8.
The four elements of a corrosion cell are anode, the cathode, the electrode, and the
metallic pathway
Correct Answer: False
, Question 9.
The anode is the
Correct Answer: part of the metal that corrodes
Question 10.
General corrosion is described as
Correct Answer: uniform loss of thickness over the exposed surface
Question 11.
In order to reach consensus and to resolve conflict on the job, the NACE Inspector's
preferred course of action is to
Correct Answer: actively listen and endeavor to understand the postions of
others.
Question 12.
A proper coating specification should contain information regarding
Correct Answer: surface preparation standards, safety, locations to be coated
Question 13.
According to the NACE attestation, it's OK to accept a gift from a contractor as long as the
gift is below the value identified in your company policy.
Correct Answer: false
Question 14.
If an inspector finds discrepancies between the specification and the coating
manufacturers technical data sheet, the preferred coarse of action is to
Correct Answer: seek written clarification from the specifier
Question 15.
All of the following are generally included within inspection reports EXCEPT
Correct Answer: cost information
Question 16.
Inspectors reports provide sufficient detail permitting the owner to evaluate
Correct Answer: contractor's performance, inspector's performance, job
progress, work interruptions
