Page 1 of 120
MARYLAND WATER TREATMENT PLANT
OPERATOR CLASS 3 CERTIFICATION EXAM
QUESTIONS AND DETAILED SOLUTIONS JUST
RELEASED
MARYLAND WATER TREATMENT PLANT OPERATOR CLASS 3 CERTIFICATION EXAM
10 MOST RELEVANT AND TESTED COVERAGE AREAS
1. Maryland Class 3 Certification, Regulations, and Operator Responsibilities
2. Iron Chemistry, Iron Removal, and Oxidation Principles
3. Contact Oxidation Treatment Processes
4. Ion Exchange for Iron Removal
5. Filtration, Filter Media, Loading, and Headloss
6. Chlorination, Chlorine Demand, Residuals, and Disinfection
7. pH, Alkalinity, Chemical Feed, and Process Control
8. Water Quality Sampling, Laboratory Analysis, and Monitoring
9. Plant Equipment, Maintenance, Safety, Troubleshooting, and Records
10. Water Treatment Mathematics, Dosage, Flow, Filter Loading, and Applied Calculations
, Page 2 of 120
QUESTIONS 1–200
1.
Which treatment capability most specifically distinguishes a Maryland Class 3 water treatment plant
from a Class 2 plant?
A. Distribution-system operation
B. Simple iron removal
C. Fluoridation only
D. Chlorination only
Answer: B
Rationale: Maryland identifies Class 3 as simple iron removal, with filtration and iron removal utilizing
ion exchange or contact oxidation processes. Class 2 is chemical treatment involving chlorination, pH
control, and fluoridation. (Department of the Environment)
2.
Which treatment processes are specifically identified by Maryland as typical for Class 3 plants?
A. Chlorination, pH control, fluoridation, filtration, and simple iron removal
B. Reverse osmosis, arsenic treatment, and membrane filtration
, Page 3 of 120
C. Coagulation, sedimentation, and complex iron removal
D. Ultraviolet treatment without chemical treatment
Answer: A
Rationale: Maryland's published classification identifies Class 3 with chlorination, pH control,
fluoridation, filtration, and iron removal using ion exchange or contact oxidation. (Department of the
Environment)
3.
Which Maryland agency administers the state's waterworks operator certification program?
A. Maryland Department of Agriculture
B. Maryland Public Service Commission
C. Maryland Department of Transportation
D. Maryland Board of Waterworks and Waste Systems Operators
Answer: D
Rationale: The Board of Waterworks and Waste Systems Operators establishes certification standards,
administers competency examinations, and issues operator certificates under Maryland's regulatory
framework. (Department of the Environment)
, Page 4 of 120
4.
Which regulation contains Maryland's operator-certification requirements?
A. COMAR 26.04.01
B. COMAR 26.06.01
C. COMAR 26.17.06
D. COMAR 26.08.05
Answer: B
Rationale: MDE identifies COMAR 26.06.01 as the Maryland Operator Regulations governing the Board
of Waterworks and Waste Systems Operators. (Department of the Environment)
5.
Why does Maryland classify water-treatment facilities according to treatment technology?
A. To establish customer water rates
B. To determine employee salaries
C. To ensure operators are technically qualified for the processes they operate
D. To determine municipal boundaries
MARYLAND WATER TREATMENT PLANT
OPERATOR CLASS 3 CERTIFICATION EXAM
QUESTIONS AND DETAILED SOLUTIONS JUST
RELEASED
MARYLAND WATER TREATMENT PLANT OPERATOR CLASS 3 CERTIFICATION EXAM
10 MOST RELEVANT AND TESTED COVERAGE AREAS
1. Maryland Class 3 Certification, Regulations, and Operator Responsibilities
2. Iron Chemistry, Iron Removal, and Oxidation Principles
3. Contact Oxidation Treatment Processes
4. Ion Exchange for Iron Removal
5. Filtration, Filter Media, Loading, and Headloss
6. Chlorination, Chlorine Demand, Residuals, and Disinfection
7. pH, Alkalinity, Chemical Feed, and Process Control
8. Water Quality Sampling, Laboratory Analysis, and Monitoring
9. Plant Equipment, Maintenance, Safety, Troubleshooting, and Records
10. Water Treatment Mathematics, Dosage, Flow, Filter Loading, and Applied Calculations
, Page 2 of 120
QUESTIONS 1–200
1.
Which treatment capability most specifically distinguishes a Maryland Class 3 water treatment plant
from a Class 2 plant?
A. Distribution-system operation
B. Simple iron removal
C. Fluoridation only
D. Chlorination only
Answer: B
Rationale: Maryland identifies Class 3 as simple iron removal, with filtration and iron removal utilizing
ion exchange or contact oxidation processes. Class 2 is chemical treatment involving chlorination, pH
control, and fluoridation. (Department of the Environment)
2.
Which treatment processes are specifically identified by Maryland as typical for Class 3 plants?
A. Chlorination, pH control, fluoridation, filtration, and simple iron removal
B. Reverse osmosis, arsenic treatment, and membrane filtration
, Page 3 of 120
C. Coagulation, sedimentation, and complex iron removal
D. Ultraviolet treatment without chemical treatment
Answer: A
Rationale: Maryland's published classification identifies Class 3 with chlorination, pH control,
fluoridation, filtration, and iron removal using ion exchange or contact oxidation. (Department of the
Environment)
3.
Which Maryland agency administers the state's waterworks operator certification program?
A. Maryland Department of Agriculture
B. Maryland Public Service Commission
C. Maryland Department of Transportation
D. Maryland Board of Waterworks and Waste Systems Operators
Answer: D
Rationale: The Board of Waterworks and Waste Systems Operators establishes certification standards,
administers competency examinations, and issues operator certificates under Maryland's regulatory
framework. (Department of the Environment)
, Page 4 of 120
4.
Which regulation contains Maryland's operator-certification requirements?
A. COMAR 26.04.01
B. COMAR 26.06.01
C. COMAR 26.17.06
D. COMAR 26.08.05
Answer: B
Rationale: MDE identifies COMAR 26.06.01 as the Maryland Operator Regulations governing the Board
of Waterworks and Waste Systems Operators. (Department of the Environment)
5.
Why does Maryland classify water-treatment facilities according to treatment technology?
A. To establish customer water rates
B. To determine employee salaries
C. To ensure operators are technically qualified for the processes they operate
D. To determine municipal boundaries
