Page 1 of 165
MILADY NAIL TECHNOLOGY FINAL EXAM (252) WITH
COMPLETE QUESTIONS AND CORRECT DETAILED
SOLUTIONS ALL WITH RATIONALES LATEST THIS YEAR
Question 1
A nail technician is preparing to perform a manicure on a new client. Before starting the service,
the technician notices a small cut on the client's cuticle that is bleeding slightly. What is the
MOST appropriate action for the technician to take?
A. Proceed with the manicure, avoiding the cut area.
B. Apply an antiseptic and continue with the service.
C. Stop the service, clean the area, and apply a bandage before continuing.
D. Refuse to perform the service and refer the client to a physician.
Answer: D
Rationale: Any break in the skin is a contraindication for nail services because it increases the
risk of infection for both the client and the technician; the client should be referred to a
physician.
, Page 2 of 165
Question 2
A nail technician is cleaning implements after a pedicure service. Which of the following steps is
CORRECT for proper disinfection?
A. Wipe the implements with a towel and place them in a drawer.
B. Rinse the implements with water, then place them in a disinfectant solution.
C. Clean the implements with soap and water, scrub with a brush, rinse, and then immerse in an
EPA-registered disinfectant.
D. Spray the implements with a disinfectant and wipe them dry.
Answer: C
Rationale: Proper disinfection requires cleaning with soap and water, scrubbing with a brush to
remove debris, rinsing, and then fully immersing in an EPA-registered disinfectant for the
required contact time.
Question 3
During a pedicure, a nail technician accidentally nicks the client's skin with a credo blade. What
should the technician do FIRST?
A. Continue the service and apply a bandage afterward.
, Page 3 of 165
B. Stop the service immediately, put on gloves, and clean the wound.
C. Ask the client if they want to continue.
D. Apply a disinfectant to the cut and continue.
Answer: B
Rationale: If a cut occurs during a service, the technician must stop the service, put on gloves,
and follow blood exposure procedures, including cleaning the wound and properly disinfecting
all contaminated tools.
Question 4
A nail technician is reviewing a product's Safety Data Sheet (SDS). What is the primary purpose
of an SDS?
A. To provide marketing information about the product.
B. To list the product's price and availability.
C. To provide information about the product's hazards, safe handling, and emergency
procedures.
D. To describe the product's intended use in nail services.
, Page 4 of 165
Answer: C
Rationale: An SDS provides detailed information about a product's hazards, safe handling,
storage, and emergency procedures, as required by OSHA.
Question 5
A nail technician is working in a salon with poor ventilation. Which of the following is the MOST
important reason to improve ventilation?
A. To keep the salon smelling pleasant.
B. To prevent the buildup of fumes that can cause respiratory irritation.
C. To comply with local fire codes.
D. To reduce the cost of air conditioning.
Answer: B
Rationale: Proper ventilation is essential to prevent the buildup of chemical fumes that can
cause respiratory irritation, headaches, and other health issues.
Question 6
A client asks a nail technician if the salon's foot spas are properly cleaned. The technician should
MILADY NAIL TECHNOLOGY FINAL EXAM (252) WITH
COMPLETE QUESTIONS AND CORRECT DETAILED
SOLUTIONS ALL WITH RATIONALES LATEST THIS YEAR
Question 1
A nail technician is preparing to perform a manicure on a new client. Before starting the service,
the technician notices a small cut on the client's cuticle that is bleeding slightly. What is the
MOST appropriate action for the technician to take?
A. Proceed with the manicure, avoiding the cut area.
B. Apply an antiseptic and continue with the service.
C. Stop the service, clean the area, and apply a bandage before continuing.
D. Refuse to perform the service and refer the client to a physician.
Answer: D
Rationale: Any break in the skin is a contraindication for nail services because it increases the
risk of infection for both the client and the technician; the client should be referred to a
physician.
, Page 2 of 165
Question 2
A nail technician is cleaning implements after a pedicure service. Which of the following steps is
CORRECT for proper disinfection?
A. Wipe the implements with a towel and place them in a drawer.
B. Rinse the implements with water, then place them in a disinfectant solution.
C. Clean the implements with soap and water, scrub with a brush, rinse, and then immerse in an
EPA-registered disinfectant.
D. Spray the implements with a disinfectant and wipe them dry.
Answer: C
Rationale: Proper disinfection requires cleaning with soap and water, scrubbing with a brush to
remove debris, rinsing, and then fully immersing in an EPA-registered disinfectant for the
required contact time.
Question 3
During a pedicure, a nail technician accidentally nicks the client's skin with a credo blade. What
should the technician do FIRST?
A. Continue the service and apply a bandage afterward.
, Page 3 of 165
B. Stop the service immediately, put on gloves, and clean the wound.
C. Ask the client if they want to continue.
D. Apply a disinfectant to the cut and continue.
Answer: B
Rationale: If a cut occurs during a service, the technician must stop the service, put on gloves,
and follow blood exposure procedures, including cleaning the wound and properly disinfecting
all contaminated tools.
Question 4
A nail technician is reviewing a product's Safety Data Sheet (SDS). What is the primary purpose
of an SDS?
A. To provide marketing information about the product.
B. To list the product's price and availability.
C. To provide information about the product's hazards, safe handling, and emergency
procedures.
D. To describe the product's intended use in nail services.
, Page 4 of 165
Answer: C
Rationale: An SDS provides detailed information about a product's hazards, safe handling,
storage, and emergency procedures, as required by OSHA.
Question 5
A nail technician is working in a salon with poor ventilation. Which of the following is the MOST
important reason to improve ventilation?
A. To keep the salon smelling pleasant.
B. To prevent the buildup of fumes that can cause respiratory irritation.
C. To comply with local fire codes.
D. To reduce the cost of air conditioning.
Answer: B
Rationale: Proper ventilation is essential to prevent the buildup of chemical fumes that can
cause respiratory irritation, headaches, and other health issues.
Question 6
A client asks a nail technician if the salon's foot spas are properly cleaned. The technician should
