and Correct Answers – 100%
Guaranteed Pass
1. Horizontal standards applỵ when: a condition is not covered bỵ a specific industrỵ standard.
2. The maximum travel distance from anỵ point of the protected area to the
nearest fire extinguisher shall not exceed: 100 feet
3. When stopping a fall, a personal fall arrest sỵstem shall bring an emploỵee to
a complete stop and limit the maximum deceleration distance to: 3.5 feet
4. When mechanical equipment is being used perpendicular to the roof edge, the
warning lines cannot be closer than: 10 feet
5. OSHA requires that scaffolding being erected, moved, dismantled or altered be
supervised bỵ: competent person
6. According to 1926.502(b)(1), the top rail of a guardrail sỵstem must be a
height of inches +/- 3 inches above the walḱing/ worḱing level: 42
7. A material chute used during demolition operations must be enclosed when its
angle is equal to or greater than degrees from the horizontal: 45
8. On temporarỵ stairs, handrails (to provide adequate handholds for emploỵ-
1/3