Basic Chemistry:
Which lab glassware is used for measuring volumes
Give this one a try later!
graduated cylinders
Safety:
Which one of the following infectious diseases is NOT transmitted by wastewater
a. tetanus
b. tuberculosis
c. AIDS
d. polio
Give this one a try later!
, the acquired immune defiency syndrome AIDS virus
Basic Chemistry:
Which lab tests has a zero holding time
Give this one a try later!
chlorine residual
Basic WasteWater Treatment:
Septic conditions are caused by
Give this one a try later!
anaerobic bacteria
Sampling, testing & reporting
The maximum holding time for a preserved total suspended solids sample is:
Give this one a try later!
7 days
,Waste Treatment Ponds:
The most common type of pond is
Give this one a try later!
facultative pond
Basic Chemistry:
Which one of the following is not a hydrate:
a. alum
b. blue nitrate
c. sodium nitrate
d. ferrous sulfate
Give this one a try later!
sodium nitrate
Safety:
The primary purpose of check vales is to prevent
Give this one a try later!
water from flowing in 2 directions
, Disinfection:
Free available chlorine consists of
Give this one a try later!
dissolved chlorine gas, hypochlorous acid, and hypochlorite ion
Maintenance:
what type of fuses would most likely be used to protect a meter?
Give this one a try later!
dual-element fuses
Sampling, testing & reporting
The maximum holding time for preserved BOD5 samples is
Give this one a try later!
2 days
Basic Chemistry:
The electrical potential between two points is measured in
Which lab glassware is used for measuring volumes
Give this one a try later!
graduated cylinders
Safety:
Which one of the following infectious diseases is NOT transmitted by wastewater
a. tetanus
b. tuberculosis
c. AIDS
d. polio
Give this one a try later!
, the acquired immune defiency syndrome AIDS virus
Basic Chemistry:
Which lab tests has a zero holding time
Give this one a try later!
chlorine residual
Basic WasteWater Treatment:
Septic conditions are caused by
Give this one a try later!
anaerobic bacteria
Sampling, testing & reporting
The maximum holding time for a preserved total suspended solids sample is:
Give this one a try later!
7 days
,Waste Treatment Ponds:
The most common type of pond is
Give this one a try later!
facultative pond
Basic Chemistry:
Which one of the following is not a hydrate:
a. alum
b. blue nitrate
c. sodium nitrate
d. ferrous sulfate
Give this one a try later!
sodium nitrate
Safety:
The primary purpose of check vales is to prevent
Give this one a try later!
water from flowing in 2 directions
, Disinfection:
Free available chlorine consists of
Give this one a try later!
dissolved chlorine gas, hypochlorous acid, and hypochlorite ion
Maintenance:
what type of fuses would most likely be used to protect a meter?
Give this one a try later!
dual-element fuses
Sampling, testing & reporting
The maximum holding time for preserved BOD5 samples is
Give this one a try later!
2 days
Basic Chemistry:
The electrical potential between two points is measured in
