NACE CIP 1 CBT Exam (Quizzes and Study Questions with Verified
Answers (Correct Update)
Question 1: NACE CIP 1 CBT Exam (Quizzes and Study
Answer:
Question 2: How is the process of steel corrosion ALWAYS described?
Answer: electrochemical
Question 3: Based on the galvanic series presented in the NACE CIP Level 1 Manual, which
three can be used effectively as galvanic anodes for carbon steel?
Answer: zinc, aluminum, magnesium
Question 4: A decrease in temperature will generally cause the corrosion rate to _____
Answer: decrease
Question 5: The electrolyte is a medium which carries the following type of current?
Answer: Ionic
Question 6: Corrosion occurring uniformly across a surface is called _____
Answer: general corrosion
Question 7: When a conflict occurs on a coatings project, as the inspector, the preferred first
course of action is to _____
Answer: actively listen and endeavor to understand the positions of others
Question 8: A proper coating specification should contain information regarding ____, ____,
and ____
Answer: surface preparation standards, safety, and locations to be used
Question 9: Is it ever okay to accept a gift from a contractor?
Answer: NO
Page 1
, Question 10: What should you do if you find discrepancies between the specification and the
coating manufacturer's technical data sheet?
Answer: seek written clarification from the owner's representative
Question 11: What are the general components of inspection reports?
Answer: - results of inspection tests - location(s) of work - details of preparation and application
Question 12: Inspection reports typically provide sufficient detail permitting the owner to
evaluate ___ ___ ___ ___
Answer: - contractor's performance - inspector's performance - job progress - work interruptions
Question 13: As an inspector headed to the job site for the first time, where would you always
find instruction regarding appropriate types of PPE?
Answer: Safety Data Sheet (SDS), previously called MSDS
Question 14: Materials inventory report should contain which of the following?
Answer: - quantity of each component of each material onsite - material batch numbers - date of
materials arrival at job site and storage information
Question 15: The primary function of the coating inspector is _____
Answer: specification compliance
Question 16: High humidity in the air during coating application can cause _____
Answer: solvent entrapment
Question 17: The temperature at which moisture condenses on a surface is called _____
Answer: dew point
Question 18: Where should the steel surface temperature reading be taken?
Answer: at the actual work location
Question 19: What type of water should be added to a sling psychrometer?
Answer: distilled
Page 2
Answers (Correct Update)
Question 1: NACE CIP 1 CBT Exam (Quizzes and Study
Answer:
Question 2: How is the process of steel corrosion ALWAYS described?
Answer: electrochemical
Question 3: Based on the galvanic series presented in the NACE CIP Level 1 Manual, which
three can be used effectively as galvanic anodes for carbon steel?
Answer: zinc, aluminum, magnesium
Question 4: A decrease in temperature will generally cause the corrosion rate to _____
Answer: decrease
Question 5: The electrolyte is a medium which carries the following type of current?
Answer: Ionic
Question 6: Corrosion occurring uniformly across a surface is called _____
Answer: general corrosion
Question 7: When a conflict occurs on a coatings project, as the inspector, the preferred first
course of action is to _____
Answer: actively listen and endeavor to understand the positions of others
Question 8: A proper coating specification should contain information regarding ____, ____,
and ____
Answer: surface preparation standards, safety, and locations to be used
Question 9: Is it ever okay to accept a gift from a contractor?
Answer: NO
Page 1
, Question 10: What should you do if you find discrepancies between the specification and the
coating manufacturer's technical data sheet?
Answer: seek written clarification from the owner's representative
Question 11: What are the general components of inspection reports?
Answer: - results of inspection tests - location(s) of work - details of preparation and application
Question 12: Inspection reports typically provide sufficient detail permitting the owner to
evaluate ___ ___ ___ ___
Answer: - contractor's performance - inspector's performance - job progress - work interruptions
Question 13: As an inspector headed to the job site for the first time, where would you always
find instruction regarding appropriate types of PPE?
Answer: Safety Data Sheet (SDS), previously called MSDS
Question 14: Materials inventory report should contain which of the following?
Answer: - quantity of each component of each material onsite - material batch numbers - date of
materials arrival at job site and storage information
Question 15: The primary function of the coating inspector is _____
Answer: specification compliance
Question 16: High humidity in the air during coating application can cause _____
Answer: solvent entrapment
Question 17: The temperature at which moisture condenses on a surface is called _____
Answer: dew point
Question 18: Where should the steel surface temperature reading be taken?
Answer: at the actual work location
Question 19: What type of water should be added to a sling psychrometer?
Answer: distilled
Page 2
