NACE CIP Level 1: Coating Inspection, Corrosion, Standards &
Testing Questions with Verified Answers (Correct Update)
Question 1: NACE CIP Level 1: Coating Inspection, Corrosion,
Answer:
Question 2: What are the three main responsibilities of a coating inspector?
Answer: 1) Observe coating work, 2) Report conformance or deviation from specifications, 3)
Document findings objectively and accurately
Question 3: Can an inspector make changes to the specification?
Answer: No, the inspector enforces the specification but never makes changes to it.
Question 4: What is the first course of action when conflicts arise on a job?
Answer: Actively listen and understand all positions before taking any action.
Question 5: What should an inspector do when they observe a problem?
Answer: Document the problem and advise both the contractor and the owner's representative.
Question 6: What are the three key characteristics of good inspection reports?
Answer: 1) Objective (factual, not opinions), 2) Accurate (correct and precise), 3) Detailed (sufficient
information)
Question 7: Should an inspector accept gifts from contractors?
Answer: No, never accept gifts from contractors as it compromises professional ethics.
Question 8: What types of reports might an inspector prepare?
Answer: Daily/weekly summary reports, material usage reports, manpower and equipment logs,
conformance and non-conformance reports.
Question 9: Is the inspector responsible for enforcing safety regulations?
Answer: No, the inspector should be aware of safety issues and report them, but is not responsible for
safety enforcement.
Page 1
, Question 10: What is the inspector's role regarding the quality control program?
Answer: The inspector is a quality control technician who observes and reports on conformance to
specifications.
Question 11: What document must inspectors sign acknowledging their professional
responsibilities?
Answer: The NACE Attestation.
Question 12: What is corrosion?
Answer: The deterioration of a substance (usually metal) or its properties from a reaction with its
environment.
Question 13: What are the four elements required for a corrosion cell?
Answer: 1) Anode, 2) Cathode, 3) Metallic Pathway, 4) Electrolyte.
Question 14: What happens at the anode in a corrosion cell?
Answer: The metal dissolves into the electrolyte (oxidation/metal loss occurs here).
Question 15: What happens at the cathode in a corrosion cell?
Answer: Reduction reactions occur (the cathode is protected from corrosion).
Question 16: Name three metals that can be used as galvanic anodes for carbon steel.
Answer: Aluminum, Magnesium, and Zinc.
Question 17: What is the galvanic series?
Answer: A list of metals arranged by their electrochemical activity from most active (anodic) to most
noble (cathodic) in a given environment.
Question 18: List metals from most active to most noble (at least 5).
Answer: Magnesium → Zinc → Aluminum → Carbon Steel → Stainless Steel → Copper → Silver →
Gold → Platinum.
Question 19: What is general (uniform) corrosion?
Answer: Corrosion that occurs relatively uniformly across the entire exposed surface.
Page 2
Testing Questions with Verified Answers (Correct Update)
Question 1: NACE CIP Level 1: Coating Inspection, Corrosion,
Answer:
Question 2: What are the three main responsibilities of a coating inspector?
Answer: 1) Observe coating work, 2) Report conformance or deviation from specifications, 3)
Document findings objectively and accurately
Question 3: Can an inspector make changes to the specification?
Answer: No, the inspector enforces the specification but never makes changes to it.
Question 4: What is the first course of action when conflicts arise on a job?
Answer: Actively listen and understand all positions before taking any action.
Question 5: What should an inspector do when they observe a problem?
Answer: Document the problem and advise both the contractor and the owner's representative.
Question 6: What are the three key characteristics of good inspection reports?
Answer: 1) Objective (factual, not opinions), 2) Accurate (correct and precise), 3) Detailed (sufficient
information)
Question 7: Should an inspector accept gifts from contractors?
Answer: No, never accept gifts from contractors as it compromises professional ethics.
Question 8: What types of reports might an inspector prepare?
Answer: Daily/weekly summary reports, material usage reports, manpower and equipment logs,
conformance and non-conformance reports.
Question 9: Is the inspector responsible for enforcing safety regulations?
Answer: No, the inspector should be aware of safety issues and report them, but is not responsible for
safety enforcement.
Page 1
, Question 10: What is the inspector's role regarding the quality control program?
Answer: The inspector is a quality control technician who observes and reports on conformance to
specifications.
Question 11: What document must inspectors sign acknowledging their professional
responsibilities?
Answer: The NACE Attestation.
Question 12: What is corrosion?
Answer: The deterioration of a substance (usually metal) or its properties from a reaction with its
environment.
Question 13: What are the four elements required for a corrosion cell?
Answer: 1) Anode, 2) Cathode, 3) Metallic Pathway, 4) Electrolyte.
Question 14: What happens at the anode in a corrosion cell?
Answer: The metal dissolves into the electrolyte (oxidation/metal loss occurs here).
Question 15: What happens at the cathode in a corrosion cell?
Answer: Reduction reactions occur (the cathode is protected from corrosion).
Question 16: Name three metals that can be used as galvanic anodes for carbon steel.
Answer: Aluminum, Magnesium, and Zinc.
Question 17: What is the galvanic series?
Answer: A list of metals arranged by their electrochemical activity from most active (anodic) to most
noble (cathodic) in a given environment.
Question 18: List metals from most active to most noble (at least 5).
Answer: Magnesium → Zinc → Aluminum → Carbon Steel → Stainless Steel → Copper → Silver →
Gold → Platinum.
Question 19: What is general (uniform) corrosion?
Answer: Corrosion that occurs relatively uniformly across the entire exposed surface.
Page 2
