CPD Exam (100) Non-Equation Questions with all Correct &
100% Verified Answers |Latest Version |Already Graded A+
1. 1. In uniform sloping drains, what is the formula used
B
to determinate velocity?
A. Hydraulic Radius Formula
B. Manning Formula.
C. Darcy-Weisbach Formula.
D. Q = AV
2. 2. This type of energy is defined as the energy of aC
body due to its elevation above a given level:
A. Kinetic Energy.
B. Static Energy.
C. Potential Energy.
D. Residual Energy.
3. 3. This storm calculation method calculates the peak A
stormwater runoff:
A. The rational method.
B. The Drainage fixture unit method.
C. The Syphonic storm drainage calculation.
D. The 100 year storm calculation.
4. 4. Discharge from Rectangular Weir with End Contrac- A
tions it is also know as :
A. The Francis Formula.
B. The Manning Formula.
C. The Darcy-Weisbach Formula.
D. The Weymouth Formula.
5. 5. What does ASTM stands for? D
A. American Science &Technical Materials.
B. American Standards & Testing Materials.
1/
43
, CPD Exam (100) Non-Equation Questions with all Correct &
100% Verified Answers |Latest Version |Already Graded A+
C. Association of Standards for Testing Materials.
D. American Society of Testing Materials.
6. 6. Within the Plumbing industry; what does the abbre-
C
viation ""HOA"" stands for??
A. Home Owners Association.
B. Holding orders Attached.
C. Hands-Off Automatic.
D. Hands on Application.
7. 7. The Liquid leaking into a sewer is called: A
A. Infiltration
B. Leakage
C. Drainage
D. Sewage
8. 8. Fire Protection Standpipe system class of service is C
defined as:
A. Class-a, Class-b, & Class-c.
B. Class-Rl, Class-Rll, & Class-Rlll.
C. Class-l, Class-ll, & Class-lll.
D. Residential, Industrial, High Rise
9. 9. The Drinking fountain water spout shall be located
D
inches maximum above the floor for units
to be used by children.
A. 36
B. 24
C. 32
D. 30
2/
43
, CPD Exam (100) Non-Equation Questions with all Correct &
100% Verified Answers |Latest Version |Already Graded A+
10. 10. An ADA handheld showerhead controlled by an A
on/off diverter and a non-positive shutoff with a
3/
43
, CPD Exam (100) Non-Equation Questions with all Correct &
100% Verified Answers |Latest Version |Already Graded A+
-inch long hose shall be provided
A. 59
B. 60
C. 62
D. 72
11. 11. Most solar water heating systems for buildings D
have two main parts:
A. Solar collector and a storage battery.
B. solar collector and automatic transfer switch.
C. Storage battery and automatic transfer switch.
D. Solar collector and a storage tank.
12. 12. This is NOT a prime areas of concern must
be ad- C dressed when planning and developing
geothermal energy systems:
A. Thermal loads to make the system
economically viable.
B. Adequate temperature and flow rate.
C. Depth of water for required drilling extensions.
D. Competitive institutional processes.
13. 13. For engineering purposes, value can be defined
A
best by the following formula:
A. Value = Worth/Cost
B. Value = Cost- Valued engineering savings.
C. Value = Worth - Cost
D. Value = Cost- men hours
14. 14. What are the two primary elements of establishing
B
the cost of a design?
4/
43
100% Verified Answers |Latest Version |Already Graded A+
1. 1. In uniform sloping drains, what is the formula used
B
to determinate velocity?
A. Hydraulic Radius Formula
B. Manning Formula.
C. Darcy-Weisbach Formula.
D. Q = AV
2. 2. This type of energy is defined as the energy of aC
body due to its elevation above a given level:
A. Kinetic Energy.
B. Static Energy.
C. Potential Energy.
D. Residual Energy.
3. 3. This storm calculation method calculates the peak A
stormwater runoff:
A. The rational method.
B. The Drainage fixture unit method.
C. The Syphonic storm drainage calculation.
D. The 100 year storm calculation.
4. 4. Discharge from Rectangular Weir with End Contrac- A
tions it is also know as :
A. The Francis Formula.
B. The Manning Formula.
C. The Darcy-Weisbach Formula.
D. The Weymouth Formula.
5. 5. What does ASTM stands for? D
A. American Science &Technical Materials.
B. American Standards & Testing Materials.
1/
43
, CPD Exam (100) Non-Equation Questions with all Correct &
100% Verified Answers |Latest Version |Already Graded A+
C. Association of Standards for Testing Materials.
D. American Society of Testing Materials.
6. 6. Within the Plumbing industry; what does the abbre-
C
viation ""HOA"" stands for??
A. Home Owners Association.
B. Holding orders Attached.
C. Hands-Off Automatic.
D. Hands on Application.
7. 7. The Liquid leaking into a sewer is called: A
A. Infiltration
B. Leakage
C. Drainage
D. Sewage
8. 8. Fire Protection Standpipe system class of service is C
defined as:
A. Class-a, Class-b, & Class-c.
B. Class-Rl, Class-Rll, & Class-Rlll.
C. Class-l, Class-ll, & Class-lll.
D. Residential, Industrial, High Rise
9. 9. The Drinking fountain water spout shall be located
D
inches maximum above the floor for units
to be used by children.
A. 36
B. 24
C. 32
D. 30
2/
43
, CPD Exam (100) Non-Equation Questions with all Correct &
100% Verified Answers |Latest Version |Already Graded A+
10. 10. An ADA handheld showerhead controlled by an A
on/off diverter and a non-positive shutoff with a
3/
43
, CPD Exam (100) Non-Equation Questions with all Correct &
100% Verified Answers |Latest Version |Already Graded A+
-inch long hose shall be provided
A. 59
B. 60
C. 62
D. 72
11. 11. Most solar water heating systems for buildings D
have two main parts:
A. Solar collector and a storage battery.
B. solar collector and automatic transfer switch.
C. Storage battery and automatic transfer switch.
D. Solar collector and a storage tank.
12. 12. This is NOT a prime areas of concern must
be ad- C dressed when planning and developing
geothermal energy systems:
A. Thermal loads to make the system
economically viable.
B. Adequate temperature and flow rate.
C. Depth of water for required drilling extensions.
D. Competitive institutional processes.
13. 13. For engineering purposes, value can be defined
A
best by the following formula:
A. Value = Worth/Cost
B. Value = Cost- Valued engineering savings.
C. Value = Worth - Cost
D. Value = Cost- men hours
14. 14. What are the two primary elements of establishing
B
the cost of a design?
4/
43
