HAND AND POWER TOOLS FOR INSTRUMENTATION REVIEW QUESTIONS WITH ACCURATE RIGHT ANSWERS | GRADED A+ .

HAND AND POWER TOOLS FOR INSTRUMENTATION
REVIEW QUESTIONS WITH ACCURATE RIGHT
ANSWERS | GRADED A+ .



Provide clearance for chips - correct Answers -One of the purposes of flutes on a tap is to ___.


Solid die - correct Answers -The tool used for threading small rods and for re-cutting damaged
treads is a ______.


HSS - correct Answers -The type of die that should be used to tread stainless steel is ______.


Secured in the closed position - correct Answers -When storing snips, the cutting jaws should be
_____.


Left - correct Answers -Aviation pattern snips with red grips are made to cut ______.


Wraparound - correct Answers -The tool used to draw a straight line around a pipe is a ______.


Remove sharp edges - correct Answers -The purpose of reaming metal conduit after it has been
cut is to ______.


Outside diameter of the conduit - correct Answers -The size shown on a conduit knockout punch
is normally the ______.


Pull wires through conduit - correct Answers -A fibreglass core fish tape is used to _____.


Squeeze bulb - correct Answers -Which of the following is used to clean chips and debris out of
a drilled hole?


1