CO General Contractor Class A Exam
Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2027 Q&A| Instant
Download Pdf.
1. A contractor is preparing for the Colorado General Contractor Class
A examination, commonly associated with the ICC National
Standard General Building Contractor A examination. Which
statement best describes the scope generally associated with a
Class A general building contractor license in Colorado jurisdictions
that use this classification?
A. The contractor is restricted to residential buildings of three stories or
fewer
B. The contractor may perform only specialty finish work such as painting
and flooring
C. The contractor is generally authorized to construct, alter, repair, add to,
or demolish buildings and structures within the jurisdiction’s Class A
scope
D. The contractor may perform only mechanical installations and
equipment repairs
Answer: C
,Rationale: Class A is generally the broadest general-building
classification, permitting extensive construction, alteration, repair,
addition, and demolition work subject to the specific jurisdiction’s
licensing rules. Colorado does not have one universal statewide general-
contractor license, so the applicable local authority must always be
considered.
2. A Colorado contractor is applying for a Class A license in a
jurisdiction that requires an ICC examination. Which examination is
commonly identified for the Class A general building contractor
classification?
A. ICC G13 Standard Building Contractor C
B. ICC F11/G11 National Standard General Building Contractor A
C. ICC G12 Standard Building Contractor B
D. ICC G33 Master Gas Pipe Fitter
Answer: B
Rationale: The ICC National Standard General Building Contractor A
examination is commonly designated for Class A general building
contractor licensing. Several Colorado jurisdictions identify the ICC Class
A examination as their qualifying test.
3. A general contractor begins construction without obtaining a
required building permit. What is the most significant concern?
A. The contractor may avoid inspection fees
B. The contractor may legally obtain the permit after final inspection
,C. The work may be subject to enforcement action, stop-work
requirements, penalties, and corrective measures
D. The owner automatically assumes all contractor liability
Answer: C
Rationale: Required permits generally must be obtained before
regulated construction begins. Performing permitted work without
authorization can lead to stop-work orders, penalties, required
corrections, inspection complications, and other enforcement
consequences.
4. During construction of a commercial building, the contractor
discovers that the structural drawings conflict with the architectural
drawings. What should the contractor do FIRST?
A. Select whichever drawing is easier to construct
B. Ignore the conflict if the work appears structurally adequate
C. Request clarification from the appropriate design professional before
proceeding with the affected work
D. Allow the subcontractor to determine which drawing governs
Answer: C
Rationale: Conflicting contract documents should be formally clarified
before affected work proceeds. Relying on an unsupported
interpretation can create defective work, change-order disputes, safety
problems, and liability.
, 5. A contractor is reviewing a concrete structural element before
placement. Which document is most important for determining the
specified concrete strength and reinforcement requirements?
A. Finish schedule
B. Structural drawings and specifications
C. Plumbing fixture schedule
D. Landscape plan
Answer: B
Rationale: Structural drawings and specifications establish design
requirements such as concrete strength, reinforcement size and spacing,
member dimensions, and other structural criteria.
6. What is the primary purpose of a construction schedule?
A. To eliminate the need for inspections
B. To establish the planned sequence and timing of project activities
C. To replace the construction contract
D. To determine the final tax liability of the contractor
Answer: B
Rationale: A construction schedule coordinates activities, resources,
subcontractors, inspections, deliveries, and milestones so that the
project can progress in an organized manner.
7. A critical subcontractor is scheduled to complete work before
another trade can begin, but the subcontractor is delayed by two
weeks. What is the best project-management response?
Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2027 Q&A| Instant
Download Pdf.
1. A contractor is preparing for the Colorado General Contractor Class
A examination, commonly associated with the ICC National
Standard General Building Contractor A examination. Which
statement best describes the scope generally associated with a
Class A general building contractor license in Colorado jurisdictions
that use this classification?
A. The contractor is restricted to residential buildings of three stories or
fewer
B. The contractor may perform only specialty finish work such as painting
and flooring
C. The contractor is generally authorized to construct, alter, repair, add to,
or demolish buildings and structures within the jurisdiction’s Class A
scope
D. The contractor may perform only mechanical installations and
equipment repairs
Answer: C
,Rationale: Class A is generally the broadest general-building
classification, permitting extensive construction, alteration, repair,
addition, and demolition work subject to the specific jurisdiction’s
licensing rules. Colorado does not have one universal statewide general-
contractor license, so the applicable local authority must always be
considered.
2. A Colorado contractor is applying for a Class A license in a
jurisdiction that requires an ICC examination. Which examination is
commonly identified for the Class A general building contractor
classification?
A. ICC G13 Standard Building Contractor C
B. ICC F11/G11 National Standard General Building Contractor A
C. ICC G12 Standard Building Contractor B
D. ICC G33 Master Gas Pipe Fitter
Answer: B
Rationale: The ICC National Standard General Building Contractor A
examination is commonly designated for Class A general building
contractor licensing. Several Colorado jurisdictions identify the ICC Class
A examination as their qualifying test.
3. A general contractor begins construction without obtaining a
required building permit. What is the most significant concern?
A. The contractor may avoid inspection fees
B. The contractor may legally obtain the permit after final inspection
,C. The work may be subject to enforcement action, stop-work
requirements, penalties, and corrective measures
D. The owner automatically assumes all contractor liability
Answer: C
Rationale: Required permits generally must be obtained before
regulated construction begins. Performing permitted work without
authorization can lead to stop-work orders, penalties, required
corrections, inspection complications, and other enforcement
consequences.
4. During construction of a commercial building, the contractor
discovers that the structural drawings conflict with the architectural
drawings. What should the contractor do FIRST?
A. Select whichever drawing is easier to construct
B. Ignore the conflict if the work appears structurally adequate
C. Request clarification from the appropriate design professional before
proceeding with the affected work
D. Allow the subcontractor to determine which drawing governs
Answer: C
Rationale: Conflicting contract documents should be formally clarified
before affected work proceeds. Relying on an unsupported
interpretation can create defective work, change-order disputes, safety
problems, and liability.
, 5. A contractor is reviewing a concrete structural element before
placement. Which document is most important for determining the
specified concrete strength and reinforcement requirements?
A. Finish schedule
B. Structural drawings and specifications
C. Plumbing fixture schedule
D. Landscape plan
Answer: B
Rationale: Structural drawings and specifications establish design
requirements such as concrete strength, reinforcement size and spacing,
member dimensions, and other structural criteria.
6. What is the primary purpose of a construction schedule?
A. To eliminate the need for inspections
B. To establish the planned sequence and timing of project activities
C. To replace the construction contract
D. To determine the final tax liability of the contractor
Answer: B
Rationale: A construction schedule coordinates activities, resources,
subcontractors, inspections, deliveries, and milestones so that the
project can progress in an organized manner.
7. A critical subcontractor is scheduled to complete work before
another trade can begin, but the subcontractor is delayed by two
weeks. What is the best project-management response?
