Michigan Maintenance&Alteration Contractor License
Exam| Practice Questions And Answers 2026/2027 |
Complete Questions And Answers (Verified Answers) |
Exam Prep | Comprehensive Exam Guide 2026&2027
1. A contractor wants to perform residential remodeling work for compensation in
Michigan under a Maintenance & Alteration Contractor license. Which statement
best describes the scope of that license?
A. It automatically authorizes every type of residential construction trade
B. It authorizes only the specific trades listed on the contractor's license
C. It authorizes commercial construction but not residential work
D. It applies only to unpaid personal labor
Answer: B
The Michigan M&A license is trade-specific. The trades for which the contractor is qualified to
practice are identified on the license.
2. Which Michigan agency is responsible for licensing Residential Builders and
Maintenance & Alteration Contractors?
A. Michigan Department of Treasury
B. Michigan State Police
C. Department of Licensing and Regulatory Affairs
D. Michigan Department of Transportation
Answer: C
The Department of Licensing and Regulatory Affairs (LARA), through the Bureau of
Construction Codes, administers Residential Builder and M&A contractor licensing.
3. Before applying for a Michigan Residential Builder or M&A Contractor license, an
applicant generally must complete how many hours of approved prelicensure
education?
A. 30 hours
B. 45 hours
C. 50 hours
D. 60 hours
Answer: D
Michigan requires 60 hours of approved prelicensure education before the examination or
license application, subject to applicable exceptions.
, 4. Which subject is specifically included among the required six-hour components of
Michigan's prelicensure education?
A. Marketing and sales
B. Advanced electrical engineering
C. Commercial real estate finance
D. Heavy highway construction
Answer: A
Marketing and sales is one of the specified six-hour subject areas in the 60-hour prelicensure
requirement.
5. An applicant completes six hours each in business management, design and building
science, contracts, marketing, project management, Michigan Residential Code, and
MIOSHA safety. How many additional elective hours are needed to reach the
required 60 hours?
A. 6
B. 12
C. 18
D. 24
Answer: C
Seven required subject areas account for 42 hours, leaving 18 hours for approved subject-
matter electives.
6. A contractor is licensed only for roofing as an M&A trade. A homeowner asks the
contractor to perform masonry work on the same house. What is the appropriate
licensing response?
A. Perform the masonry work because the property is residential
B. Perform it if the homeowner signs a waiver
C. Perform it if the roofing contract is completed first
D. Do not perform the masonry work unless properly qualified for that trade
Answer: D
An M&A contractor's authority is tied to the trades listed on the license. A roofing
qualification does not by itself authorize masonry work.
7. Which of the following is a recognized Michigan Maintenance & Alteration trade?
A. Carpentry
B. Medical gas installation
C. Elevator operation
D. Structural bridge engineering
Answer: A
,Carpentry is specifically listed among Michigan's M&A contractor trades.
8. A contractor is reviewing the license before accepting a project. Why is checking the
listed trade classification particularly important for an M&A contractor?
A. It determines the contractor's federal tax rate
B. It identifies the residential trades for which the contractor is qualified
C. It establishes the contractor's insurance deductible
D. It replaces the need for building permits
Answer: B
The listed M&A trades establish the scope of the contractor's licensed practice.
9. Which activity would generally fall within the recognized M&A trade list?
A. Roofing
B. Aircraft maintenance
C. Automobile repair
D. Industrial crane certification
Answer: A
Roofing is one of the specific residential M&A trades identified by Michigan LARA.
10. A contractor plans to begin work that affects a structural bearing wall. The
contractor argues that all interior repairs are ordinary repairs and never require a
permit. What is the key issue?
A. Structural work can fall outside the ordinary-repair exemption
B. Interior work is always exempt
C. A homeowner can waive all permit requirements
D. Permits are required only for exterior painting
Answer: A
Michigan's ordinary-repair provision does not extend to cutting or removing structural
beams, bearing supports, or other work specifically excluded from the exemption.
11. Which activity is specifically identified as an M&A contractor trade in Michigan?
A. Swimming pools
B. Elevator inspection
C. Firearm repair
D. Automotive painting
Answer: A
Swimming pools are included among the recognized M&A contractor trades.
, 12. A contractor has completed the required prelicensure education and is ready to
proceed toward examination. Which organization conducts the Michigan
Residential Builder and M&A examinations?
A. OSHA
B. PSI
C. ICC exclusively
D. Michigan Department of Treasury
Answer: B
Michigan LARA states that Residential Builder and M&A examinations are conducted by PSI
after the applicant is approved.
13. A candidate asks whether the Michigan M&A examination is based solely on
general construction knowledge. What is the most accurate response?
A. Yes, no Michigan-specific requirements are tested
B. No, the examinations are based on applicable code, law, and rules
C. Yes, because PSI writes all laws used on the exam
D. No, the exam tests only accounting
Answer: B
Michigan states that its examinations are based on the applicable code, law, and rules
governing the trade.
14. A contractor wants to renew an individual Michigan Residential Builder or M&A
license. What is the regular renewal cycle identified by LARA?
A. Every year
B. Every two years
C. Every three years
D. Every five years
Answer: C
LARA states that individual Residential Builder and M&A licenses are renewed every three
years by May 31.
15. During the first or second renewal cycle, an individual Residential Builder or M&A
contractor is subject to how many continuing education hours under the current
LARA renewal information?
A. 3 hours
B. 10 hours
C. 15 hours
D. 21 hours
Answer: D
Exam| Practice Questions And Answers 2026/2027 |
Complete Questions And Answers (Verified Answers) |
Exam Prep | Comprehensive Exam Guide 2026&2027
1. A contractor wants to perform residential remodeling work for compensation in
Michigan under a Maintenance & Alteration Contractor license. Which statement
best describes the scope of that license?
A. It automatically authorizes every type of residential construction trade
B. It authorizes only the specific trades listed on the contractor's license
C. It authorizes commercial construction but not residential work
D. It applies only to unpaid personal labor
Answer: B
The Michigan M&A license is trade-specific. The trades for which the contractor is qualified to
practice are identified on the license.
2. Which Michigan agency is responsible for licensing Residential Builders and
Maintenance & Alteration Contractors?
A. Michigan Department of Treasury
B. Michigan State Police
C. Department of Licensing and Regulatory Affairs
D. Michigan Department of Transportation
Answer: C
The Department of Licensing and Regulatory Affairs (LARA), through the Bureau of
Construction Codes, administers Residential Builder and M&A contractor licensing.
3. Before applying for a Michigan Residential Builder or M&A Contractor license, an
applicant generally must complete how many hours of approved prelicensure
education?
A. 30 hours
B. 45 hours
C. 50 hours
D. 60 hours
Answer: D
Michigan requires 60 hours of approved prelicensure education before the examination or
license application, subject to applicable exceptions.
, 4. Which subject is specifically included among the required six-hour components of
Michigan's prelicensure education?
A. Marketing and sales
B. Advanced electrical engineering
C. Commercial real estate finance
D. Heavy highway construction
Answer: A
Marketing and sales is one of the specified six-hour subject areas in the 60-hour prelicensure
requirement.
5. An applicant completes six hours each in business management, design and building
science, contracts, marketing, project management, Michigan Residential Code, and
MIOSHA safety. How many additional elective hours are needed to reach the
required 60 hours?
A. 6
B. 12
C. 18
D. 24
Answer: C
Seven required subject areas account for 42 hours, leaving 18 hours for approved subject-
matter electives.
6. A contractor is licensed only for roofing as an M&A trade. A homeowner asks the
contractor to perform masonry work on the same house. What is the appropriate
licensing response?
A. Perform the masonry work because the property is residential
B. Perform it if the homeowner signs a waiver
C. Perform it if the roofing contract is completed first
D. Do not perform the masonry work unless properly qualified for that trade
Answer: D
An M&A contractor's authority is tied to the trades listed on the license. A roofing
qualification does not by itself authorize masonry work.
7. Which of the following is a recognized Michigan Maintenance & Alteration trade?
A. Carpentry
B. Medical gas installation
C. Elevator operation
D. Structural bridge engineering
Answer: A
,Carpentry is specifically listed among Michigan's M&A contractor trades.
8. A contractor is reviewing the license before accepting a project. Why is checking the
listed trade classification particularly important for an M&A contractor?
A. It determines the contractor's federal tax rate
B. It identifies the residential trades for which the contractor is qualified
C. It establishes the contractor's insurance deductible
D. It replaces the need for building permits
Answer: B
The listed M&A trades establish the scope of the contractor's licensed practice.
9. Which activity would generally fall within the recognized M&A trade list?
A. Roofing
B. Aircraft maintenance
C. Automobile repair
D. Industrial crane certification
Answer: A
Roofing is one of the specific residential M&A trades identified by Michigan LARA.
10. A contractor plans to begin work that affects a structural bearing wall. The
contractor argues that all interior repairs are ordinary repairs and never require a
permit. What is the key issue?
A. Structural work can fall outside the ordinary-repair exemption
B. Interior work is always exempt
C. A homeowner can waive all permit requirements
D. Permits are required only for exterior painting
Answer: A
Michigan's ordinary-repair provision does not extend to cutting or removing structural
beams, bearing supports, or other work specifically excluded from the exemption.
11. Which activity is specifically identified as an M&A contractor trade in Michigan?
A. Swimming pools
B. Elevator inspection
C. Firearm repair
D. Automotive painting
Answer: A
Swimming pools are included among the recognized M&A contractor trades.
, 12. A contractor has completed the required prelicensure education and is ready to
proceed toward examination. Which organization conducts the Michigan
Residential Builder and M&A examinations?
A. OSHA
B. PSI
C. ICC exclusively
D. Michigan Department of Treasury
Answer: B
Michigan LARA states that Residential Builder and M&A examinations are conducted by PSI
after the applicant is approved.
13. A candidate asks whether the Michigan M&A examination is based solely on
general construction knowledge. What is the most accurate response?
A. Yes, no Michigan-specific requirements are tested
B. No, the examinations are based on applicable code, law, and rules
C. Yes, because PSI writes all laws used on the exam
D. No, the exam tests only accounting
Answer: B
Michigan states that its examinations are based on the applicable code, law, and rules
governing the trade.
14. A contractor wants to renew an individual Michigan Residential Builder or M&A
license. What is the regular renewal cycle identified by LARA?
A. Every year
B. Every two years
C. Every three years
D. Every five years
Answer: C
LARA states that individual Residential Builder and M&A licenses are renewed every three
years by May 31.
15. During the first or second renewal cycle, an individual Residential Builder or M&A
contractor is subject to how many continuing education hours under the current
LARA renewal information?
A. 3 hours
B. 10 hours
C. 15 hours
D. 21 hours
Answer: D
