ADVANCED RIGGING ACTUAL SCRIPT
WITH 100 PERCENT CORRECT ANSWERS
◉ What may occur when a sling is pulled out from a load resting
on it?
Answer: The load may roll, The load may be damaged, the sling
may be damaged
◉ When should a knot be used in a sling to shorten the sling leg?
Answer: Never
◉ The lower a sling angle becomes, what happens to a sling
tension?
Answer: The sling tension will increase
◉ All of the following must be marked on a shackle except:
Answer: County of origin
◉ What is the lowest horizontal angle allowed with a non-
shouldered eyebolt?
Answer: 90 degrees
◉ Where must the direction of pull be, when using beam clamps?
Answer: In line with the web of beam
, ◉ When is secondary restraint required when using rollers or
trollies?
Answer: Never
◉ Which way should the handle of an unloaded lever binder face?
Answer: Up
◉ How do you release a lever binder?
Answer: Using a pry bar
◉ How do you seat the wedge in a wedge socket?
Answer: Under a load
◉ What goes in the hole of a sister hook?
Answer: The pin of a shackle
◉ What do you look for when inspecting a mechanical jack?
Answer: Wear to the ratchet teeth
◉ When does a basket hitch have its full capacity?
Answer: Wear to the ratchet teeth
◉ What must you do to work under a suspended load?
WITH 100 PERCENT CORRECT ANSWERS
◉ What may occur when a sling is pulled out from a load resting
on it?
Answer: The load may roll, The load may be damaged, the sling
may be damaged
◉ When should a knot be used in a sling to shorten the sling leg?
Answer: Never
◉ The lower a sling angle becomes, what happens to a sling
tension?
Answer: The sling tension will increase
◉ All of the following must be marked on a shackle except:
Answer: County of origin
◉ What is the lowest horizontal angle allowed with a non-
shouldered eyebolt?
Answer: 90 degrees
◉ Where must the direction of pull be, when using beam clamps?
Answer: In line with the web of beam
, ◉ When is secondary restraint required when using rollers or
trollies?
Answer: Never
◉ Which way should the handle of an unloaded lever binder face?
Answer: Up
◉ How do you release a lever binder?
Answer: Using a pry bar
◉ How do you seat the wedge in a wedge socket?
Answer: Under a load
◉ What goes in the hole of a sister hook?
Answer: The pin of a shackle
◉ What do you look for when inspecting a mechanical jack?
Answer: Wear to the ratchet teeth
◉ When does a basket hitch have its full capacity?
Answer: Wear to the ratchet teeth
◉ What must you do to work under a suspended load?
