MS CONVEYOR SYSTEMS | LATEST VERSION EXAM
PREP - VERIFIED QUESTIONS AND ANSWERS -
COMPLETE COVERAGE
CONVEYOR SYSTEMS
1. What is the primary purpose of a conveyor system?
A. To store materials permanently
B. To move materials from one location to another
C. To increase product temperature
D. To measure product weight
ANSWER : B. To move materials from one location to another.
Explanation: Conveyors transport materials efficiently between
designated points while reducing manual handling.
2. Which component provides the moving surface on a belt conveyor?
A. Conveyor belt
B. Gearbox
C. Motor starter
D. Bearing housing
ANSWER : A. Conveyor belt.
Explanation: The conveyor belt forms the continuous moving surface that
carries material.
3. What component supplies mechanical power to a conveyor?
A. Idler
B. Drive motor
C. Scraper
D. Chute
, ANSWER : B. Drive motor.
Explanation: The motor supplies rotational power to the conveyor drive
system.
4. What is the function of a conveyor pulley?
A. Support electrical wiring
B. Guide and drive the belt
C. Measure belt temperature
D. Lubricate bearings
ANSWER : B. Guide and drive the belt.
Explanation: Pulleys support belt movement, with drive pulleys
transmitting power to the belt.
5. Which pulley is normally connected to the drive motor?
A. Drive pulley
B. Tail pulley
C. Snub pulley
D. Bend pulley
ANSWER : A. Drive pulley.
Explanation: The drive pulley receives power from the motor and
transfers motion to the belt.
6. What is the purpose of an idler?
A. To support the conveyor belt
B. To supply electrical power
C. To control motor voltage
D. To store material
ANSWER : A. To support the conveyor belt.
Explanation: Idlers support the belt and load while allowing the belt to
travel with reduced resistance.
7. What is belt tracking?
A. Measuring belt thickness
B. Keeping the belt centered during operation
C. Cleaning the belt
D. Measuring motor speed
ANSWER : B. Keeping the belt centered during operation.
Explanation: Proper tracking keeps the belt aligned with the conveyor
structure and reduces edge damage.
, 8. What is a common result of poor belt tracking?
A. Increased belt edge wear
B. Lower ambient temperature
C. Increased lighting
D. Reduced material density
ANSWER : A. Increased belt edge wear.
Explanation: A belt running off-center often contacts structural
components, causing edge damage and possible spillage.
9. What device provides emergency stopping along a conveyor?
A. Pull-cord switch
B. Flow meter
C. Pressure regulator
D. Thermostat
ANSWER : A. Pull-cord switch.
Explanation: Pull-cord switches provide accessible emergency-stop
activation along conveyor runs.
10. Why are conveyor guards installed?
A. To increase belt speed
B. To prevent contact with moving components
C. To increase material weight
D. To improve lighting
ANSWER : B. To prevent contact with moving components.
Explanation: Guards reduce access to moving parts such as belts, pulleys,
chains, and sprockets.
11. What is the main function of a conveyor gearbox?
A. Convert electrical energy into light
B. Reduce speed and increase usable torque
C. Measure belt width
D. Remove dust
ANSWER : B. Reduce speed and increase usable torque.
Explanation: Gearboxes transmit motor power while changing rotational
speed and torque to suit the conveyor.
12. Which component commonly connects a motor to a gearbox?
A. Coupling
B. Idler
, C. Chute
D. Belt scraper
ANSWER : A. Coupling.
Explanation: A coupling transfers rotational power between shafts while
accommodating small alignment differences.
13. What is the purpose of a belt tensioning system?
A. Maintain appropriate belt tension
B. Increase conveyor noise
C. Remove all material from the belt
D. Control room lighting
ANSWER : A. Maintain appropriate belt tension.
Explanation: Proper tension helps maintain drive traction and prevents
excessive belt movement.
14. Which device automatically maintains belt tension on some
conveyors?
A. Gravity take-up
B. Belt scraper
C. Head chute
D. Emergency horn
ANSWER : A. Gravity take-up.
Explanation: A gravity take-up uses a suspended weight to maintain
tension as belt length or operating conditions change.
15. What is a take-up pulley used for?
A. Maintaining belt tension
B. Measuring motor current
C. Cooling the gearbox
D. Cleaning electrical contacts
ANSWER : A. Maintaining belt tension.
Explanation: Take-up assemblies compensate for belt stretch and help
maintain suitable operating tension.
16. What is the purpose of a belt scraper?
A. Remove material from the belt
B. Increase belt width
C. Drive the conveyor
D. Adjust motor voltage
PREP - VERIFIED QUESTIONS AND ANSWERS -
COMPLETE COVERAGE
CONVEYOR SYSTEMS
1. What is the primary purpose of a conveyor system?
A. To store materials permanently
B. To move materials from one location to another
C. To increase product temperature
D. To measure product weight
ANSWER : B. To move materials from one location to another.
Explanation: Conveyors transport materials efficiently between
designated points while reducing manual handling.
2. Which component provides the moving surface on a belt conveyor?
A. Conveyor belt
B. Gearbox
C. Motor starter
D. Bearing housing
ANSWER : A. Conveyor belt.
Explanation: The conveyor belt forms the continuous moving surface that
carries material.
3. What component supplies mechanical power to a conveyor?
A. Idler
B. Drive motor
C. Scraper
D. Chute
, ANSWER : B. Drive motor.
Explanation: The motor supplies rotational power to the conveyor drive
system.
4. What is the function of a conveyor pulley?
A. Support electrical wiring
B. Guide and drive the belt
C. Measure belt temperature
D. Lubricate bearings
ANSWER : B. Guide and drive the belt.
Explanation: Pulleys support belt movement, with drive pulleys
transmitting power to the belt.
5. Which pulley is normally connected to the drive motor?
A. Drive pulley
B. Tail pulley
C. Snub pulley
D. Bend pulley
ANSWER : A. Drive pulley.
Explanation: The drive pulley receives power from the motor and
transfers motion to the belt.
6. What is the purpose of an idler?
A. To support the conveyor belt
B. To supply electrical power
C. To control motor voltage
D. To store material
ANSWER : A. To support the conveyor belt.
Explanation: Idlers support the belt and load while allowing the belt to
travel with reduced resistance.
7. What is belt tracking?
A. Measuring belt thickness
B. Keeping the belt centered during operation
C. Cleaning the belt
D. Measuring motor speed
ANSWER : B. Keeping the belt centered during operation.
Explanation: Proper tracking keeps the belt aligned with the conveyor
structure and reduces edge damage.
, 8. What is a common result of poor belt tracking?
A. Increased belt edge wear
B. Lower ambient temperature
C. Increased lighting
D. Reduced material density
ANSWER : A. Increased belt edge wear.
Explanation: A belt running off-center often contacts structural
components, causing edge damage and possible spillage.
9. What device provides emergency stopping along a conveyor?
A. Pull-cord switch
B. Flow meter
C. Pressure regulator
D. Thermostat
ANSWER : A. Pull-cord switch.
Explanation: Pull-cord switches provide accessible emergency-stop
activation along conveyor runs.
10. Why are conveyor guards installed?
A. To increase belt speed
B. To prevent contact with moving components
C. To increase material weight
D. To improve lighting
ANSWER : B. To prevent contact with moving components.
Explanation: Guards reduce access to moving parts such as belts, pulleys,
chains, and sprockets.
11. What is the main function of a conveyor gearbox?
A. Convert electrical energy into light
B. Reduce speed and increase usable torque
C. Measure belt width
D. Remove dust
ANSWER : B. Reduce speed and increase usable torque.
Explanation: Gearboxes transmit motor power while changing rotational
speed and torque to suit the conveyor.
12. Which component commonly connects a motor to a gearbox?
A. Coupling
B. Idler
, C. Chute
D. Belt scraper
ANSWER : A. Coupling.
Explanation: A coupling transfers rotational power between shafts while
accommodating small alignment differences.
13. What is the purpose of a belt tensioning system?
A. Maintain appropriate belt tension
B. Increase conveyor noise
C. Remove all material from the belt
D. Control room lighting
ANSWER : A. Maintain appropriate belt tension.
Explanation: Proper tension helps maintain drive traction and prevents
excessive belt movement.
14. Which device automatically maintains belt tension on some
conveyors?
A. Gravity take-up
B. Belt scraper
C. Head chute
D. Emergency horn
ANSWER : A. Gravity take-up.
Explanation: A gravity take-up uses a suspended weight to maintain
tension as belt length or operating conditions change.
15. What is a take-up pulley used for?
A. Maintaining belt tension
B. Measuring motor current
C. Cooling the gearbox
D. Cleaning electrical contacts
ANSWER : A. Maintaining belt tension.
Explanation: Take-up assemblies compensate for belt stretch and help
maintain suitable operating tension.
16. What is the purpose of a belt scraper?
A. Remove material from the belt
B. Increase belt width
C. Drive the conveyor
D. Adjust motor voltage
