LADWP Meter Reader (1611) Exam
Practice Questions and Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. What is the primary responsibility of a Meter Reader?
A. Repair damaged electrical transformers
B. Install underground water mains
C. Accurately read and record utility meter information
D. Approve customer billing adjustments
Correct Answer: C. Accurately read and record utility meter information
The Meter Reader classification is responsible for reading water and electric
meters and making accurate recordings of those readings. Repairing
infrastructure and approving billing adjustments are responsibilities of other
functions.
2. Which skill is most important when recording a meter reading?
A. Accuracy
B. Speed at the expense of accuracy
C. Memorizing customer names
D. Estimating values when unsure
Correct Answer: A. Accuracy
Accurate meter readings are essential because the recorded consumption
information can be used for customer billing and utility records. A reader should
verify questionable information rather than estimate a reading.
,3. A previous meter reading was 24,680 and the current reading is 25,125. What
is the consumption difference?
A. 345 units
B. 445 units
C. 455 units
D. 545 units
Correct Answer: B. 445 units
Consumption is calculated by subtracting the previous reading from the current
reading: 25,125 − 24,680 = 445 units.
4. Which device is specifically associated with recording meter information in
the Meter Reader position?
A. Hand-held computer
B. Welding machine
C. Hydraulic jack
D. Pressure washer
Correct Answer: A. Hand-held computer
The official Meter Reader position description specifically identifies the use of a
hand-held computer for making accurate recordings of meter readings.
5. A meter display shows 18,742. Which number should be entered if the system
requires the displayed whole-unit reading?
A. 18,247
B. 18,724
C. 18,742
D. 18,472
Correct Answer: C. 18,742
,The reading should be entered exactly as displayed when the system calls for the
whole-unit meter value. Reversing or transposing digits creates inaccurate utility
data.
6. Which practice best reduces errors when entering a meter reading into a
hand-held computer?
A. Enter the reading from memory after leaving the meter
B. Enter the reading while carefully comparing it with the display
C. Round the reading to the nearest hundred
D. Ask another customer for the reading
Correct Answer: B. Enter the reading while carefully comparing it with the
display
Comparing the entered value with the meter display helps prevent transposed,
omitted, or substituted digits.
7. A meter reading increased from 8,950 to 9,275. What was the consumption?
A. 225 units
B. 275 units
C. 325 units
D. 375 units
Correct Answer: C. 325 units
Subtracting the previous reading from the current reading gives 9,275 − 8,950 =
325 units.
8. Which observation should a Meter Reader report rather than ignore?
A. A meter that appears damaged
B. A normal meter label
C. A clear sidewalk
D. A properly closed gate
, Correct Answer: A. A meter that appears damaged
The official position description includes reporting irregularities found in the field.
Visible meter damage may affect accurate measurement, safety, or utility
operations and should therefore be reported.
9. What is the best response if a meter cannot be safely accessed?
A. Enter the property without permission
B. Estimate the reading without documentation
C. Follow established procedures for inaccessible meters
D. Alter the previous reading
Correct Answer: C. Follow established procedures for inaccessible meters
Safety and accuracy take priority. A Meter Reader should not enter an unsafe or
unauthorized area simply to obtain a reading. The appropriate procedure should
be followed and the access issue documented or reported.
10. Which situation presents the greatest immediate field safety concern?
A. A cracked sidewalk near the meter
B. A clear driveway
C. A readable meter label
D. A properly secured meter box
Correct Answer: A. A cracked sidewalk near the meter
A damaged walking surface can create a trip or fall hazard. Field employees
should remain alert to environmental hazards and use appropriate precautions.
11. What should a Meter Reader do before approaching an unfamiliar work
area?
A. Begin work immediately without observing the surroundings
B. Assess the area for hazards
Practice Questions and Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. What is the primary responsibility of a Meter Reader?
A. Repair damaged electrical transformers
B. Install underground water mains
C. Accurately read and record utility meter information
D. Approve customer billing adjustments
Correct Answer: C. Accurately read and record utility meter information
The Meter Reader classification is responsible for reading water and electric
meters and making accurate recordings of those readings. Repairing
infrastructure and approving billing adjustments are responsibilities of other
functions.
2. Which skill is most important when recording a meter reading?
A. Accuracy
B. Speed at the expense of accuracy
C. Memorizing customer names
D. Estimating values when unsure
Correct Answer: A. Accuracy
Accurate meter readings are essential because the recorded consumption
information can be used for customer billing and utility records. A reader should
verify questionable information rather than estimate a reading.
,3. A previous meter reading was 24,680 and the current reading is 25,125. What
is the consumption difference?
A. 345 units
B. 445 units
C. 455 units
D. 545 units
Correct Answer: B. 445 units
Consumption is calculated by subtracting the previous reading from the current
reading: 25,125 − 24,680 = 445 units.
4. Which device is specifically associated with recording meter information in
the Meter Reader position?
A. Hand-held computer
B. Welding machine
C. Hydraulic jack
D. Pressure washer
Correct Answer: A. Hand-held computer
The official Meter Reader position description specifically identifies the use of a
hand-held computer for making accurate recordings of meter readings.
5. A meter display shows 18,742. Which number should be entered if the system
requires the displayed whole-unit reading?
A. 18,247
B. 18,724
C. 18,742
D. 18,472
Correct Answer: C. 18,742
,The reading should be entered exactly as displayed when the system calls for the
whole-unit meter value. Reversing or transposing digits creates inaccurate utility
data.
6. Which practice best reduces errors when entering a meter reading into a
hand-held computer?
A. Enter the reading from memory after leaving the meter
B. Enter the reading while carefully comparing it with the display
C. Round the reading to the nearest hundred
D. Ask another customer for the reading
Correct Answer: B. Enter the reading while carefully comparing it with the
display
Comparing the entered value with the meter display helps prevent transposed,
omitted, or substituted digits.
7. A meter reading increased from 8,950 to 9,275. What was the consumption?
A. 225 units
B. 275 units
C. 325 units
D. 375 units
Correct Answer: C. 325 units
Subtracting the previous reading from the current reading gives 9,275 − 8,950 =
325 units.
8. Which observation should a Meter Reader report rather than ignore?
A. A meter that appears damaged
B. A normal meter label
C. A clear sidewalk
D. A properly closed gate
, Correct Answer: A. A meter that appears damaged
The official position description includes reporting irregularities found in the field.
Visible meter damage may affect accurate measurement, safety, or utility
operations and should therefore be reported.
9. What is the best response if a meter cannot be safely accessed?
A. Enter the property without permission
B. Estimate the reading without documentation
C. Follow established procedures for inaccessible meters
D. Alter the previous reading
Correct Answer: C. Follow established procedures for inaccessible meters
Safety and accuracy take priority. A Meter Reader should not enter an unsafe or
unauthorized area simply to obtain a reading. The appropriate procedure should
be followed and the access issue documented or reported.
10. Which situation presents the greatest immediate field safety concern?
A. A cracked sidewalk near the meter
B. A clear driveway
C. A readable meter label
D. A properly secured meter box
Correct Answer: A. A cracked sidewalk near the meter
A damaged walking surface can create a trip or fall hazard. Field employees
should remain alert to environmental hazards and use appropriate precautions.
11. What should a Meter Reader do before approaching an unfamiliar work
area?
A. Begin work immediately without observing the surroundings
B. Assess the area for hazards
