Page 1 of 137
CUSP (Certified Utility Safety Professional) EXAM MOST
RECENT 300 QUESTIONS 2026-2027 WITH SOLUTIONS &
WELL DETAILED RATIONALES JUST REALEASED
CUSP (Certified Utility Safety Professional) exam, administered by the Utility
Safety & Ops Leadership Network (USOLN) , is the premier certification for
safety professionals in the utility industry. It validates expertise in regulatory
compliance, safety leadership, and field-specific hazard management across
transmission & distribution (T&D), gas, and power generation operations.
Q1. What is the primary purpose of 29 CFR 1910.269?
A) To regulate general industry safety
B) To set safety requirements for electric power generation, transmission, and distribution
C) To regulate construction site safety
D) To set standards for hazardous materials handling
Answer: B
29 CFR 1910.269 is the specific OSHA standard that sets safety requirements for electric power
generation, transmission, and distribution. It covers operation, maintenance, and construction
of overhead and underground electric lines and equipment.
Q2. According to OSHA 1910.269(c), what must an employer ensure before any job begins?
A) A pre-job briefing is conducted covering hazards, work procedures, and special precautions
1
SUCCESS!
,Page 2 of 137
B) All employees have completed a physical fitness test
C) A safety committee has approved the work plan
D) The job site has been inspected by a third party
Answer: A
OSHA 1910.269(c) requires that a pre-job briefing be conducted covering hazards, work
procedures, special precautions, energy source controls, and PPE requirements.
Q3. What is the definition of Minimum Approach Distance (MAD)?
A) The closest distance a qualified worker may approach an energized conductor
B) The maximum distance a worker can be from a radio
C) The minimum distance between two pieces of equipment
D) The distance from the ground to the lowest conductor
Answer: A
MAD is the calculated safe working distance that a qualified worker must maintain from
energized conductors.
Q4. Which OSHA standard covers power transmission and distribution construction?
A) 29 CFR 1910.269
B) 29 CFR 1926 Subpart V
2
SUCCESS!
,Page 3 of 137
C) 29 CFR 1910.147
D) 29 CFR 1926 Subpart M
Answer: B
29 CFR 1926 Subpart V covers power transmission and distribution construction work.
Q5. What does ATPV stand for?
A) Arc Thermal Protective Value
B) American Testing and Protective Value
C) Arc Temperature Protection Vest
D) Alternative Thermal Protection Value
Answer: A
ATPV stands for Arc Thermal Protective Value, which measures the protective performance of
arc-rated clothing.
Q6. What is the primary purpose of the OSHA 1910.147 standard?
A) To regulate electrical safety
B) To regulate lockout/tagout procedures
C) To regulate fall protection
D) To regulate hazardous materials
3
SUCCESS!
, Page 4 of 137
Answer: B
29 CFR 1910.147 is the OSHA standard for the control of hazardous energy (lockout/tagout).
Q7. Which regulatory body enforces the Occupational Safety and Health Act?
A) EPA
B) OSHA
C) DOT
D) NRC
Answer: B
OSHA (Occupational Safety and Health Administration) enforces the OSH Act and its associated
standards.
Q8. What is the significance of a CUSP certification being accredited by the International Society
for Performance Improvement?
A) It indicates the certification meets rigorous industry standards
B) It means the certification is only valid internationally
C) It means the certification is endorsed by the government
D) It indicates the certification is only for managers
Answer: A
4
SUCCESS!
CUSP (Certified Utility Safety Professional) EXAM MOST
RECENT 300 QUESTIONS 2026-2027 WITH SOLUTIONS &
WELL DETAILED RATIONALES JUST REALEASED
CUSP (Certified Utility Safety Professional) exam, administered by the Utility
Safety & Ops Leadership Network (USOLN) , is the premier certification for
safety professionals in the utility industry. It validates expertise in regulatory
compliance, safety leadership, and field-specific hazard management across
transmission & distribution (T&D), gas, and power generation operations.
Q1. What is the primary purpose of 29 CFR 1910.269?
A) To regulate general industry safety
B) To set safety requirements for electric power generation, transmission, and distribution
C) To regulate construction site safety
D) To set standards for hazardous materials handling
Answer: B
29 CFR 1910.269 is the specific OSHA standard that sets safety requirements for electric power
generation, transmission, and distribution. It covers operation, maintenance, and construction
of overhead and underground electric lines and equipment.
Q2. According to OSHA 1910.269(c), what must an employer ensure before any job begins?
A) A pre-job briefing is conducted covering hazards, work procedures, and special precautions
1
SUCCESS!
,Page 2 of 137
B) All employees have completed a physical fitness test
C) A safety committee has approved the work plan
D) The job site has been inspected by a third party
Answer: A
OSHA 1910.269(c) requires that a pre-job briefing be conducted covering hazards, work
procedures, special precautions, energy source controls, and PPE requirements.
Q3. What is the definition of Minimum Approach Distance (MAD)?
A) The closest distance a qualified worker may approach an energized conductor
B) The maximum distance a worker can be from a radio
C) The minimum distance between two pieces of equipment
D) The distance from the ground to the lowest conductor
Answer: A
MAD is the calculated safe working distance that a qualified worker must maintain from
energized conductors.
Q4. Which OSHA standard covers power transmission and distribution construction?
A) 29 CFR 1910.269
B) 29 CFR 1926 Subpart V
2
SUCCESS!
,Page 3 of 137
C) 29 CFR 1910.147
D) 29 CFR 1926 Subpart M
Answer: B
29 CFR 1926 Subpart V covers power transmission and distribution construction work.
Q5. What does ATPV stand for?
A) Arc Thermal Protective Value
B) American Testing and Protective Value
C) Arc Temperature Protection Vest
D) Alternative Thermal Protection Value
Answer: A
ATPV stands for Arc Thermal Protective Value, which measures the protective performance of
arc-rated clothing.
Q6. What is the primary purpose of the OSHA 1910.147 standard?
A) To regulate electrical safety
B) To regulate lockout/tagout procedures
C) To regulate fall protection
D) To regulate hazardous materials
3
SUCCESS!
, Page 4 of 137
Answer: B
29 CFR 1910.147 is the OSHA standard for the control of hazardous energy (lockout/tagout).
Q7. Which regulatory body enforces the Occupational Safety and Health Act?
A) EPA
B) OSHA
C) DOT
D) NRC
Answer: B
OSHA (Occupational Safety and Health Administration) enforces the OSH Act and its associated
standards.
Q8. What is the significance of a CUSP certification being accredited by the International Society
for Performance Improvement?
A) It indicates the certification meets rigorous industry standards
B) It means the certification is only valid internationally
C) It means the certification is endorsed by the government
D) It indicates the certification is only for managers
Answer: A
4
SUCCESS!
