Wisconsin Liquefied Petroleum Gas
Restricted Exam Practice Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant
Download Pdf
1. Which characteristic of liquefied petroleum gas (LP-gas) requires
special consideration during storage and handling?
A. It is lighter than air in all conditions
B. It cannot form combustible mixtures
C. It is stored as a liquid under pressure and expands into vapor
D. It loses all energy content when vaporized
Answer: C. It is stored as a liquid under pressure and expands into vapor
LP-gas is stored as a pressurized liquid and changes into vapor when
released. This expansion can create large volumes of flammable gas,
requiring proper handling and ventilation.
, 2. The primary components of commercial LP-gas are:
A. Methane and hydrogen
B. Propane and butane
C. Oxygen and nitrogen
D. Carbon monoxide and carbon dioxide
Answer: B. Propane and butane
Commercial LP-gas consists mainly of propane and butane, with propane
being the most commonly used fuel for residential and commercial
applications.
3. The odor added to LP-gas is primarily used to:
A. Increase heating value
B. Reduce vapor pressure
C. Help detect leaks
D. Prevent freezing
Answer: C. Help detect leaks
An odorant such as ethyl mercaptan is added to LP-gas because the natural
gas has little or no detectable odor, allowing leaks to be identified by
smell.
4. LP-gas vapor is generally:
,A. Nonflammable
B. Heavier than air
C. Lighter than oxygen
D. Unable to accumulate
Answer: B. Heavier than air
LP-gas vapor is heavier than air and can collect in low areas, creating a
potential fire or explosion hazard.
5. The ignition temperature of LP-gas refers to:
A. The temperature at which the gas freezes
B. The temperature at which vapor becomes visible
C. The minimum temperature required for ignition without an external
flame
D. The temperature at which pressure becomes zero
Answer: C. The minimum temperature required for ignition without an
external flame
Ignition temperature is the minimum temperature at which LP-gas can
ignite without a spark or flame source.
6. The purpose of a pressure regulator in an LP-gas system is to:
, A. Increase tank pressure
B. Reduce and control gas pressure
C. Add odorant to the fuel
D. Remove moisture from the gas
Answer: B. Reduce and control gas pressure
Regulators reduce the high pressure from storage containers to a safe
operating pressure and maintain proper gas flow.
7. A container safety relief valve is designed to:
A. Prevent all gas flow
B. Increase container pressure
C. Release excessive pressure safely
D. Measure fuel consumption
Answer: C. Release excessive pressure safely
Safety relief valves protect containers by allowing excessive pressure to
escape before the container becomes damaged.
8. LP-gas containers should be installed:
A. In enclosed unventilated rooms
B. Where they are protected from physical damage
Restricted Exam Practice Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant
Download Pdf
1. Which characteristic of liquefied petroleum gas (LP-gas) requires
special consideration during storage and handling?
A. It is lighter than air in all conditions
B. It cannot form combustible mixtures
C. It is stored as a liquid under pressure and expands into vapor
D. It loses all energy content when vaporized
Answer: C. It is stored as a liquid under pressure and expands into vapor
LP-gas is stored as a pressurized liquid and changes into vapor when
released. This expansion can create large volumes of flammable gas,
requiring proper handling and ventilation.
, 2. The primary components of commercial LP-gas are:
A. Methane and hydrogen
B. Propane and butane
C. Oxygen and nitrogen
D. Carbon monoxide and carbon dioxide
Answer: B. Propane and butane
Commercial LP-gas consists mainly of propane and butane, with propane
being the most commonly used fuel for residential and commercial
applications.
3. The odor added to LP-gas is primarily used to:
A. Increase heating value
B. Reduce vapor pressure
C. Help detect leaks
D. Prevent freezing
Answer: C. Help detect leaks
An odorant such as ethyl mercaptan is added to LP-gas because the natural
gas has little or no detectable odor, allowing leaks to be identified by
smell.
4. LP-gas vapor is generally:
,A. Nonflammable
B. Heavier than air
C. Lighter than oxygen
D. Unable to accumulate
Answer: B. Heavier than air
LP-gas vapor is heavier than air and can collect in low areas, creating a
potential fire or explosion hazard.
5. The ignition temperature of LP-gas refers to:
A. The temperature at which the gas freezes
B. The temperature at which vapor becomes visible
C. The minimum temperature required for ignition without an external
flame
D. The temperature at which pressure becomes zero
Answer: C. The minimum temperature required for ignition without an
external flame
Ignition temperature is the minimum temperature at which LP-gas can
ignite without a spark or flame source.
6. The purpose of a pressure regulator in an LP-gas system is to:
, A. Increase tank pressure
B. Reduce and control gas pressure
C. Add odorant to the fuel
D. Remove moisture from the gas
Answer: B. Reduce and control gas pressure
Regulators reduce the high pressure from storage containers to a safe
operating pressure and maintain proper gas flow.
7. A container safety relief valve is designed to:
A. Prevent all gas flow
B. Increase container pressure
C. Release excessive pressure safely
D. Measure fuel consumption
Answer: C. Release excessive pressure safely
Safety relief valves protect containers by allowing excessive pressure to
escape before the container becomes damaged.
8. LP-gas containers should be installed:
A. In enclosed unventilated rooms
B. Where they are protected from physical damage
