Ultimate 4th Class Part A Power Engineering Study Guide
"Power plant" means any one or more boilers in which steam or other vapour is generated at more than
103 kPa (15 psi).
3 multiple choice options
Power engineers are skilled workers who operate and maintain the equipment in a power plant.
3 multiple choice options
In the early days, owners of power plants hired __________ unskilled
workers, who started out doing manual labour and 3 multiple choice options
through
acquired experience they were promoted to jobs with
gradually
increasing levels of skill.
In order to produce greater efficiency, higher boiler serious accidents
pressures were used and this led to __________ due to
3 multiple choice options
employing of unqualified operators in a power plant.
Which of the following is not a common work schedule Seasonal lay-offs
for 3 multiple choice options
power engineers?
When oil mixes with water in the boiler the resultant serious foaming
effect
3 multiple choice options
is:
The holder of a Certificate of Competency, the power plant
classification of which authorizes him or her to act as a
3 multiple choice options
engineer, may sketch, construct, install, operate, repair,
and give advice on all things pertaining to any __________ in
which that person is employed.
Power engineers can usually expect to work rotating shifts.
3 multiple choice options
In a power plant, the power engineer may function as a safe and efficient
supervisor who directs others in the __________ operation on
3 multiple choice options
a shift.
, Ultimate 4th Class Part A Power Engineering Study Guide
Committees which establish standards are composed experts from the industry, professional and insurance groups and all levels of
primarily government
of which of the following elements?
3 multiple choice options
Which of the following certificates of competency First Class Engineer's Certificate of Competency
qualifies
3 multiple choice options
the holder to take charge of the general care and
operation
of any power plant as chief steam engineer, and to
supervise
the engineers in that plant and take charge of a shift in
any
power plant as shift engineer?
Which of the following duties is a holder of a Fourth Class Take charge of a shift in a power plant having a capacity
Engineer's Certificate of Competency not qualified to of more than 10,000 kW, as shift engineer.
perform?
3 multiple choice options
Which of the following is required in order to progress to Education, experience, and the next lower level
a certificate.
higher certificate?
3 multiple choice options
The IAO is an organization who's primary concern is: lowering of insurance costs through standardization
3 multiple choice options
In the early days, the following two agencies got involved insurance underwriters and governments
in 3 multiple choice options
the certification of both power plant operators and
equipment
due to the many accidents that were caused by
employing
unqualified operators and improper use of equipment in
power
plants:
Unqualified individuals operating a power plant or safety
pressure
3 multiple choice options
plant risk the __________ of the plant and the general
public.
In Alberta, the Safety Codes Act established the First, Second, Third, and Fourth
following
3 multiple choice options
classes of Power Engineer's certificates (Other provinces
and
territories have also established the same structure for
these certifications.)
, Ultimate 4th Class Part A Power Engineering Study Guide
A Fourth Class Power Engineer's certificate of 5,000
competency
3 multiple choice options
qualifies the holder to take charge of a shift in a power
plant having a capacity of not more than __________ kW, as a
A Fourth Class Power Engineer's certificate of 10 000
competency
3 multiple choice options
qualifies the holder to take charge of a shift in a power
plant consisting of one or more coil type drumless
boilers
having an aggregate capacity of not more than __________
kW,
when used for the sole purpose of underground thermal
flooding in oil fields, as shift engineer.
A Fourth Class Power Engineer's Certificate of 5,000
Competency 3 multiple choice options
qualifies the holder to take charge of the general care
and
operation of a power plant having a capacity of not more
than
__________ kW as chief steam engineer, and to supervise the
engineers in that plant.
Which of the following is a symbol for a unit of K
thermodynamic temperature?
3 multiple choice options
A mole refers to a quantity of: Amount of substance
3 multiple choice options
The basic unit of mass in the SI system is kilograms
3 multiple choice options
The basic unit of length in the SI system is meters
3 multiple choice options
The basic unit of time in the SI system is seconds
3 multiple choice options
The basic unit of electrical current in the SI system is ampere
3 multiple choice options
, Ultimate 4th Class Part A Power Engineering Study Guide
The basic unit of thermodynamic temperature in the SI kelvin
system
3 multiple choice options
is
The symbol for the basic unit of electrical current is A
3 multiple choice options
The symbol for the basic unit of time is s
3 multiple choice options
The symbol for the basic unit of mass is kg
3 multiple choice options
Which of the following is a symbol for a unit of luminous cd
intensity? 3 multiple choice options
One thousand of a base unit is indicated by the prefix: kilo
3 multiple choice options
One hundredth of a gram is called a: centigram
3 multiple choice options
One million of a base unit is indicated by the prefix mega
3 multiple choice options
One billion of a base unit is indicated by the prefix giga
3 multiple choice options
One millionth of a base unit is indicated by the prefix micro
3 multiple choice options
"Power plant" means any one or more boilers in which steam or other vapour is generated at more than
103 kPa (15 psi).
3 multiple choice options
Power engineers are skilled workers who operate and maintain the equipment in a power plant.
3 multiple choice options
In the early days, owners of power plants hired __________ unskilled
workers, who started out doing manual labour and 3 multiple choice options
through
acquired experience they were promoted to jobs with
gradually
increasing levels of skill.
In order to produce greater efficiency, higher boiler serious accidents
pressures were used and this led to __________ due to
3 multiple choice options
employing of unqualified operators in a power plant.
Which of the following is not a common work schedule Seasonal lay-offs
for 3 multiple choice options
power engineers?
When oil mixes with water in the boiler the resultant serious foaming
effect
3 multiple choice options
is:
The holder of a Certificate of Competency, the power plant
classification of which authorizes him or her to act as a
3 multiple choice options
engineer, may sketch, construct, install, operate, repair,
and give advice on all things pertaining to any __________ in
which that person is employed.
Power engineers can usually expect to work rotating shifts.
3 multiple choice options
In a power plant, the power engineer may function as a safe and efficient
supervisor who directs others in the __________ operation on
3 multiple choice options
a shift.
, Ultimate 4th Class Part A Power Engineering Study Guide
Committees which establish standards are composed experts from the industry, professional and insurance groups and all levels of
primarily government
of which of the following elements?
3 multiple choice options
Which of the following certificates of competency First Class Engineer's Certificate of Competency
qualifies
3 multiple choice options
the holder to take charge of the general care and
operation
of any power plant as chief steam engineer, and to
supervise
the engineers in that plant and take charge of a shift in
any
power plant as shift engineer?
Which of the following duties is a holder of a Fourth Class Take charge of a shift in a power plant having a capacity
Engineer's Certificate of Competency not qualified to of more than 10,000 kW, as shift engineer.
perform?
3 multiple choice options
Which of the following is required in order to progress to Education, experience, and the next lower level
a certificate.
higher certificate?
3 multiple choice options
The IAO is an organization who's primary concern is: lowering of insurance costs through standardization
3 multiple choice options
In the early days, the following two agencies got involved insurance underwriters and governments
in 3 multiple choice options
the certification of both power plant operators and
equipment
due to the many accidents that were caused by
employing
unqualified operators and improper use of equipment in
power
plants:
Unqualified individuals operating a power plant or safety
pressure
3 multiple choice options
plant risk the __________ of the plant and the general
public.
In Alberta, the Safety Codes Act established the First, Second, Third, and Fourth
following
3 multiple choice options
classes of Power Engineer's certificates (Other provinces
and
territories have also established the same structure for
these certifications.)
, Ultimate 4th Class Part A Power Engineering Study Guide
A Fourth Class Power Engineer's certificate of 5,000
competency
3 multiple choice options
qualifies the holder to take charge of a shift in a power
plant having a capacity of not more than __________ kW, as a
A Fourth Class Power Engineer's certificate of 10 000
competency
3 multiple choice options
qualifies the holder to take charge of a shift in a power
plant consisting of one or more coil type drumless
boilers
having an aggregate capacity of not more than __________
kW,
when used for the sole purpose of underground thermal
flooding in oil fields, as shift engineer.
A Fourth Class Power Engineer's Certificate of 5,000
Competency 3 multiple choice options
qualifies the holder to take charge of the general care
and
operation of a power plant having a capacity of not more
than
__________ kW as chief steam engineer, and to supervise the
engineers in that plant.
Which of the following is a symbol for a unit of K
thermodynamic temperature?
3 multiple choice options
A mole refers to a quantity of: Amount of substance
3 multiple choice options
The basic unit of mass in the SI system is kilograms
3 multiple choice options
The basic unit of length in the SI system is meters
3 multiple choice options
The basic unit of time in the SI system is seconds
3 multiple choice options
The basic unit of electrical current in the SI system is ampere
3 multiple choice options
, Ultimate 4th Class Part A Power Engineering Study Guide
The basic unit of thermodynamic temperature in the SI kelvin
system
3 multiple choice options
is
The symbol for the basic unit of electrical current is A
3 multiple choice options
The symbol for the basic unit of time is s
3 multiple choice options
The symbol for the basic unit of mass is kg
3 multiple choice options
Which of the following is a symbol for a unit of luminous cd
intensity? 3 multiple choice options
One thousand of a base unit is indicated by the prefix: kilo
3 multiple choice options
One hundredth of a gram is called a: centigram
3 multiple choice options
One million of a base unit is indicated by the prefix mega
3 multiple choice options
One billion of a base unit is indicated by the prefix giga
3 multiple choice options
One millionth of a base unit is indicated by the prefix micro
3 multiple choice options
