NYC SITE SAFETY MANAGER EXAM NEWEST EVALUATED EXAM PRACTICE 100
QUESTIONS 2026-2027|ORIGINAL QUESTIONS & ANSWERS |DETAILED
RATIONALES |HINTED COMPLETE EXAM PREP GRADED A+*INSTANT
DOWNLOAD PDF*
1. A Site Safety Manager is required at a new construction or demolition
site when the building is:
A. 10 stories or higher
B. 12 stories or higher
C. 15 stories or higher, or 100,000 square feet or greater
D. 20 stories or higher only
Answer: C. 15 stories or higher, or 100,000 square feet or greater
The NYC Department of Buildings requires a certified Site Safety Manager for
qualifying major construction or demolition sites, including new buildings 15
stories and above or 100,000 square feet or greater.
2. Which document establishes the required safety measures and
procedures for a qualifying construction or demolition project?
A. Certificate of Occupancy
B. Site Safety Plan
C. Equipment Maintenance Log
D. Construction Contract
Answer: B. Site Safety Plan
The Site Safety Plan identifies required safety measures, controls, procedures,
and responsibilities for the work being performed.
3. Which NYC Building Code chapter primarily addresses safeguards during
construction or demolition?
A. Chapter 11
B. Chapter 18
C. Chapter 28
D. Chapter 33
Answer: D. Chapter 33
,Chapter 33 contains requirements addressing safeguards during construction,
alteration, and demolition.
4. During a site inspection, the Site Safety Manager discovers an imminent
danger to workers. What should be done FIRST?
A. Wait for the next scheduled safety meeting
B. Allow the operation to continue while documenting the condition
C. Take immediate action to eliminate or control the danger
D. Wait until the contractor completes the work
Answer: C. Take immediate action to eliminate or control the danger
An immediate hazard requires prompt corrective action. Protecting workers
and the public takes priority over continuing the operation.
5. Which situation presents the greatest fall hazard?
A. Walking on a protected floor
B. Working near an unprotected leading edge
C. Working inside a completed office
D. Working behind a secured barricade
Answer: B. Working near an unprotected leading edge
Unprotected edges create a significant fall exposure and require appropriate
fall protection.
6. A guardrail system is being used as fall protection. Which component
primarily prevents a person from falling through the space beneath the
top rail?
A. Toe board
B. Midrail
C. Base plate
D. Sole board
Answer: B. Midrail
The midrail reduces the opening between the walking surface and top rail and
helps prevent workers from falling through the guardrail system.
, 7. What is the primary purpose of a toe board at an elevated working
surface?
A. Increase scaffold height
B. Prevent objects from falling to lower levels
C. Support a scaffold platform
D. Replace a guardrail
Answer: B. Prevent objects from falling to lower levels
Toe boards help prevent tools, materials, and debris from being kicked or
sliding from an elevated platform.
8. A worker is using a suspended scaffold during high winds. What is the
most appropriate safety response?
A. Continue work if the worker wears a hard hat
B. Increase the scaffold speed
C. Follow required wind and weather procedures and suspend unsafe
operations
D. Remove the guardrails
Answer: C. Follow required wind and weather procedures and suspend
unsafe operations
Weather conditions can make suspended scaffold operations hazardous. Work
must be controlled according to applicable safety requirements and site
procedures.
9. Which condition is most likely to cause a scaffold platform to become
unstable?
A. Properly secured components
B. Adequate bearing support
C. Unauthorized alteration of the scaffold
D. Properly installed guardrails
Answer: C. Unauthorized alteration of the scaffold
Unauthorized modifications can compromise the scaffold's structural integrity
and intended load path.
, 10.Before workers enter an excavation, the Site Safety Manager should be
particularly concerned about:
A. Paint color
B. Soil stability and protective systems
C. Worker uniforms
D. Building interior finishes
Answer: B. Soil stability and protective systems
Excavation hazards include cave-ins, falling materials, hazardous atmospheres,
water accumulation, and nearby loads or structures.
11.Which protective system is specifically intended to protect workers from
excavation cave-ins?
A. Trench box or other approved protective system
B. Warning tape alone
C. Safety vest
D. Dust mask
Answer: A. Trench box or other approved protective system
Shielding and other approved protective systems reduce the risk of workers
being buried or struck by collapsing soil.
12.Excavated material is placed too close to the edge of an excavation. Why
is this dangerous?
A. It improves soil stability
B. It reduces the excavation depth
C. It can increase loading at the edge and contribute to collapse or falling
material
D. It prevents water accumulation
Answer: C. It can increase loading at the edge and contribute to collapse or
falling material
Spoil piles and equipment near excavation edges can impose additional loads
and create falling-object hazards.
13.Which hazard is commonly associated with demolition operations?
QUESTIONS 2026-2027|ORIGINAL QUESTIONS & ANSWERS |DETAILED
RATIONALES |HINTED COMPLETE EXAM PREP GRADED A+*INSTANT
DOWNLOAD PDF*
1. A Site Safety Manager is required at a new construction or demolition
site when the building is:
A. 10 stories or higher
B. 12 stories or higher
C. 15 stories or higher, or 100,000 square feet or greater
D. 20 stories or higher only
Answer: C. 15 stories or higher, or 100,000 square feet or greater
The NYC Department of Buildings requires a certified Site Safety Manager for
qualifying major construction or demolition sites, including new buildings 15
stories and above or 100,000 square feet or greater.
2. Which document establishes the required safety measures and
procedures for a qualifying construction or demolition project?
A. Certificate of Occupancy
B. Site Safety Plan
C. Equipment Maintenance Log
D. Construction Contract
Answer: B. Site Safety Plan
The Site Safety Plan identifies required safety measures, controls, procedures,
and responsibilities for the work being performed.
3. Which NYC Building Code chapter primarily addresses safeguards during
construction or demolition?
A. Chapter 11
B. Chapter 18
C. Chapter 28
D. Chapter 33
Answer: D. Chapter 33
,Chapter 33 contains requirements addressing safeguards during construction,
alteration, and demolition.
4. During a site inspection, the Site Safety Manager discovers an imminent
danger to workers. What should be done FIRST?
A. Wait for the next scheduled safety meeting
B. Allow the operation to continue while documenting the condition
C. Take immediate action to eliminate or control the danger
D. Wait until the contractor completes the work
Answer: C. Take immediate action to eliminate or control the danger
An immediate hazard requires prompt corrective action. Protecting workers
and the public takes priority over continuing the operation.
5. Which situation presents the greatest fall hazard?
A. Walking on a protected floor
B. Working near an unprotected leading edge
C. Working inside a completed office
D. Working behind a secured barricade
Answer: B. Working near an unprotected leading edge
Unprotected edges create a significant fall exposure and require appropriate
fall protection.
6. A guardrail system is being used as fall protection. Which component
primarily prevents a person from falling through the space beneath the
top rail?
A. Toe board
B. Midrail
C. Base plate
D. Sole board
Answer: B. Midrail
The midrail reduces the opening between the walking surface and top rail and
helps prevent workers from falling through the guardrail system.
, 7. What is the primary purpose of a toe board at an elevated working
surface?
A. Increase scaffold height
B. Prevent objects from falling to lower levels
C. Support a scaffold platform
D. Replace a guardrail
Answer: B. Prevent objects from falling to lower levels
Toe boards help prevent tools, materials, and debris from being kicked or
sliding from an elevated platform.
8. A worker is using a suspended scaffold during high winds. What is the
most appropriate safety response?
A. Continue work if the worker wears a hard hat
B. Increase the scaffold speed
C. Follow required wind and weather procedures and suspend unsafe
operations
D. Remove the guardrails
Answer: C. Follow required wind and weather procedures and suspend
unsafe operations
Weather conditions can make suspended scaffold operations hazardous. Work
must be controlled according to applicable safety requirements and site
procedures.
9. Which condition is most likely to cause a scaffold platform to become
unstable?
A. Properly secured components
B. Adequate bearing support
C. Unauthorized alteration of the scaffold
D. Properly installed guardrails
Answer: C. Unauthorized alteration of the scaffold
Unauthorized modifications can compromise the scaffold's structural integrity
and intended load path.
, 10.Before workers enter an excavation, the Site Safety Manager should be
particularly concerned about:
A. Paint color
B. Soil stability and protective systems
C. Worker uniforms
D. Building interior finishes
Answer: B. Soil stability and protective systems
Excavation hazards include cave-ins, falling materials, hazardous atmospheres,
water accumulation, and nearby loads or structures.
11.Which protective system is specifically intended to protect workers from
excavation cave-ins?
A. Trench box or other approved protective system
B. Warning tape alone
C. Safety vest
D. Dust mask
Answer: A. Trench box or other approved protective system
Shielding and other approved protective systems reduce the risk of workers
being buried or struck by collapsing soil.
12.Excavated material is placed too close to the edge of an excavation. Why
is this dangerous?
A. It improves soil stability
B. It reduces the excavation depth
C. It can increase loading at the edge and contribute to collapse or falling
material
D. It prevents water accumulation
Answer: C. It can increase loading at the edge and contribute to collapse or
falling material
Spoil piles and equipment near excavation edges can impose additional loads
and create falling-object hazards.
13.Which hazard is commonly associated with demolition operations?
