ADVANCE RIGGER TEST BANK FULL
SOLUTION 100 PERCENT CORRECT
●● 2) Which of the following is an incorrect statement about the
shackle?
Answer: When using a shackle with a hook, body hung on the hook.
●● 3) The space between the sling or chain and the load can become a:
Answer: Pinch point
●● 4) The maximum load weight that a sling is designed to carry is the:
Answer: Rated capacity
●● 5) Which hand signal standards were developed for use with mobile
and overhead cranes?
Answer: ASME
●● 6) Most alloy steel chain slings can be used in temperatures up to:
Answer: 500°F
●● 7) Which style of lifting lug is used for angular loading applications?
Answer: Shouldered
, ●● 8) If a wire rope sling appears to be damaged, the decision to keep it
in service can only be made by a:
Answer: Qualified person
●● 9) Which style of hook is designed to be used on alloy chain slings?
Answer: Grab hook
●● 10) In general industry, the most widely used type of shackle the
design:
Answer: Screw pin
●● 11) To lift heavy loads, all chain hoists use a(n) ______ system.
Answer: Gear
●● 12) To calculate the total sling stress applied during a lift, you need
to know the total weight of the load and the:
Answer: Angle at which the slings will attach
●● 13) Which type of hitch is ideal for lifting bundles of items, such as
pipes?
Answer: Double-wrap choker hitch
SOLUTION 100 PERCENT CORRECT
●● 2) Which of the following is an incorrect statement about the
shackle?
Answer: When using a shackle with a hook, body hung on the hook.
●● 3) The space between the sling or chain and the load can become a:
Answer: Pinch point
●● 4) The maximum load weight that a sling is designed to carry is the:
Answer: Rated capacity
●● 5) Which hand signal standards were developed for use with mobile
and overhead cranes?
Answer: ASME
●● 6) Most alloy steel chain slings can be used in temperatures up to:
Answer: 500°F
●● 7) Which style of lifting lug is used for angular loading applications?
Answer: Shouldered
, ●● 8) If a wire rope sling appears to be damaged, the decision to keep it
in service can only be made by a:
Answer: Qualified person
●● 9) Which style of hook is designed to be used on alloy chain slings?
Answer: Grab hook
●● 10) In general industry, the most widely used type of shackle the
design:
Answer: Screw pin
●● 11) To lift heavy loads, all chain hoists use a(n) ______ system.
Answer: Gear
●● 12) To calculate the total sling stress applied during a lift, you need
to know the total weight of the load and the:
Answer: Angle at which the slings will attach
●● 13) Which type of hitch is ideal for lifting bundles of items, such as
pipes?
Answer: Double-wrap choker hitch
