ASNT LEVEL 3 BASIC MATERIALS & PROCESSES
ACTUAL EXAM WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL DEFINED
ANSWERS
Play your way to mastery with fun games
Match Blocks Charms NEW
Terms in this set (176)
Fracture is a type of material failure. Permanent deformation.
Of the following which is another
type of material failure?
Which of the following statements Discontinuities can propagate and become defects.
best differentiates between a defect
and a discontinuity?
Nondestructive testing is often NDT involves indirect tests related to some other
differentiated from other quality or characteristic of material.
measurements or inspection
techniques in that:
, What are the functions of NDT? Identifying and sorting of material.
Identifying of material properties.
Ensuring absence of faults or defects that could
cause a part to fail.
An important basis for the success of The need to ensure that unexpected flaws of some
fracture control design procedures is: critical size are not present when the component
enters service.
If properly used, NDT can assist in Providing an accurate evaluation of the number and
fracture control by: type of discontinuities that exist in a material .
A statement that a particular There is a 5% probability that the probability of
experiment produced a 0.9 detection is overstated.
probability of detection with a 95%
confidence level means that:
Most solid metals and plastics that Engineering materials.
have reasonable strength at room
temperature are called:
Material properties, as used in design, Materials testing.
are most frequently determined by:
Even at the early stages of product The design of the part should permit easy access to
planning, NDT should be considered critical areas for later inspection.
because:
which of the following material Chemical properties.
properties are of most concern if
corrosion resistance is essential?
ACTUAL EXAM WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL DEFINED
ANSWERS
Play your way to mastery with fun games
Match Blocks Charms NEW
Terms in this set (176)
Fracture is a type of material failure. Permanent deformation.
Of the following which is another
type of material failure?
Which of the following statements Discontinuities can propagate and become defects.
best differentiates between a defect
and a discontinuity?
Nondestructive testing is often NDT involves indirect tests related to some other
differentiated from other quality or characteristic of material.
measurements or inspection
techniques in that:
, What are the functions of NDT? Identifying and sorting of material.
Identifying of material properties.
Ensuring absence of faults or defects that could
cause a part to fail.
An important basis for the success of The need to ensure that unexpected flaws of some
fracture control design procedures is: critical size are not present when the component
enters service.
If properly used, NDT can assist in Providing an accurate evaluation of the number and
fracture control by: type of discontinuities that exist in a material .
A statement that a particular There is a 5% probability that the probability of
experiment produced a 0.9 detection is overstated.
probability of detection with a 95%
confidence level means that:
Most solid metals and plastics that Engineering materials.
have reasonable strength at room
temperature are called:
Material properties, as used in design, Materials testing.
are most frequently determined by:
Even at the early stages of product The design of the part should permit easy access to
planning, NDT should be considered critical areas for later inspection.
because:
which of the following material Chemical properties.
properties are of most concern if
corrosion resistance is essential?
