https://www.stuvia.com/user/filwe1099salminhttps://www.stuvia.com/user/filwe1099salmin
Home Inspection Final Exam Part 1https://www.stuvia.com/user/filwe1099salminhttps://www.stuv
https://www.stuvia.com/user/filwe1099salmin
Home Inspection Final Exam Part 1
Corrugated Stainless Steel Tubing
CSST is :
Defines what is and what is not included in a standard home inspection.
The standards of practice for home inspections:
Operate main shut-off valves
The inspector is not required to:
Material that covers exposed edges of roofing where it meets chimneys or
sidewalls to prevent water
intrusion.
What is flashing?
https://www.stuvia.com/user/filwe1099salmin
https://www.stuvia.com/user/filwe1099salmin
, https://www.stuvia.com/user/filwe1099salminhttps://www.stuvia.com/user/filwe1099salmin
Home Inspection Final Exam Part 1https://www.stuvia.com/user/filwe1099salminhttps://www.stuv
https://www.stuvia.com/user/filwe1099salmin
Crack in the heat exchanger
What deficiency would cause the replacement of a forced air gas furnace?
That there is moisture trapped between the felt-plies.
Blisters and bubbles on a build-up roof usually indicate:
Help To limit the liability of a home inspector.
The standards of practice:
6"
What is the minimum clearance from combustibles for a single wall furnace vent?
vent to the exterior.
A gas dryer can:
https://www.stuvia.com/user/filwe1099salmin
https://www.stuvia.com/user/filwe1099salmin
Home Inspection Final Exam Part 1https://www.stuvia.com/user/filwe1099salminhttps://www.stuv
https://www.stuvia.com/user/filwe1099salmin
Home Inspection Final Exam Part 1
Corrugated Stainless Steel Tubing
CSST is :
Defines what is and what is not included in a standard home inspection.
The standards of practice for home inspections:
Operate main shut-off valves
The inspector is not required to:
Material that covers exposed edges of roofing where it meets chimneys or
sidewalls to prevent water
intrusion.
What is flashing?
https://www.stuvia.com/user/filwe1099salmin
https://www.stuvia.com/user/filwe1099salmin
, https://www.stuvia.com/user/filwe1099salminhttps://www.stuvia.com/user/filwe1099salmin
Home Inspection Final Exam Part 1https://www.stuvia.com/user/filwe1099salminhttps://www.stuv
https://www.stuvia.com/user/filwe1099salmin
Crack in the heat exchanger
What deficiency would cause the replacement of a forced air gas furnace?
That there is moisture trapped between the felt-plies.
Blisters and bubbles on a build-up roof usually indicate:
Help To limit the liability of a home inspector.
The standards of practice:
6"
What is the minimum clearance from combustibles for a single wall furnace vent?
vent to the exterior.
A gas dryer can:
https://www.stuvia.com/user/filwe1099salmin
https://www.stuvia.com/user/filwe1099salmin
