MWS CDC UPDATED ACTUAL QUESTIONS AND
CORRECT ANSWERS
Question:
1. nfpa 1901 covers
Answer:
fire apparatus
Question:
2. nfpa 1901 says vehicles must put out what gal
Answer:
1500 to 3000 gal
Question:
3. how many external mdh fill connections are needed
Answer:
1
Question:
4. mws equipped with
Answer:
1000 gal valve strainer and 30 degree elbow slow closing 3 in or greater valves
Question:
5. requirements for large tank discharge
Answer:
discharge 90% of tank volume at 1,000 gpm
Question:
6. if a mws apparatus is considered a tanker it meets what gpm and percentage output
Answer:
500 gpm until 80% is used
Question:
7. PDP= required intake pressure+TPL
Answer:
Question:
8. TPL=
Answer:
FL+EP+APL
Question:
9. FL=
, Answer:
C*Qsqured*L
Question:
10. daily checkout is divided into how many sections
Answer:
8
Question:
11. left front
Answer:
cab doors saddle tanks springs and shackles platforms and rails wheel and tire
Question:
12. tools for engine test
Answer:
air filer trestriction guage oil coolant
Question:
13. drive belt tension
Answer:
1/2-3/4 in
Question:
14. coolant reservoir how full
Answer:
half full
Question:
15. weekly check items
Answer:
pump intake strainers pump gearbox and packing glands rapid dump system
Question:
16. daily inspection items
Answer:
pump primer pump pressure control device pump drive control winterization cooling system fuel tank
relief valves pump
Question:
17. 2 types of test on truck
Answer:
pre service and fire pump service test
Question:
18. pre service test done by
CORRECT ANSWERS
Question:
1. nfpa 1901 covers
Answer:
fire apparatus
Question:
2. nfpa 1901 says vehicles must put out what gal
Answer:
1500 to 3000 gal
Question:
3. how many external mdh fill connections are needed
Answer:
1
Question:
4. mws equipped with
Answer:
1000 gal valve strainer and 30 degree elbow slow closing 3 in or greater valves
Question:
5. requirements for large tank discharge
Answer:
discharge 90% of tank volume at 1,000 gpm
Question:
6. if a mws apparatus is considered a tanker it meets what gpm and percentage output
Answer:
500 gpm until 80% is used
Question:
7. PDP= required intake pressure+TPL
Answer:
Question:
8. TPL=
Answer:
FL+EP+APL
Question:
9. FL=
, Answer:
C*Qsqured*L
Question:
10. daily checkout is divided into how many sections
Answer:
8
Question:
11. left front
Answer:
cab doors saddle tanks springs and shackles platforms and rails wheel and tire
Question:
12. tools for engine test
Answer:
air filer trestriction guage oil coolant
Question:
13. drive belt tension
Answer:
1/2-3/4 in
Question:
14. coolant reservoir how full
Answer:
half full
Question:
15. weekly check items
Answer:
pump intake strainers pump gearbox and packing glands rapid dump system
Question:
16. daily inspection items
Answer:
pump primer pump pressure control device pump drive control winterization cooling system fuel tank
relief valves pump
Question:
17. 2 types of test on truck
Answer:
pre service and fire pump service test
Question:
18. pre service test done by