USOLN Certified Utility Safety Professional (CUSP) Green
Base Exam
USOLN Certified Utility Safety Professional (CUSP) Green Base Exam
,1. Which decision best reflects professional responsibility for Training-needs analysis, competence verification and safety
communication after an unexpected result is observed? Consider the decision while maintaining traceable evidence.
A. Accept a verbal assurance in place of objective evidence
B. Verify isolation, grounding, clearance or protective measures using the procedure applicable to the specific utility hazard
C. Continue normal operation until the next scheduled inspection even though the discrepancy is unresolved
D. Use a previous project record as evidence for the current condition without confirming equivalence
Correct Answer: B
Explanation: For Training-needs analysis, competence verification and safety communication, high-consequence utility hazards require positive verification of
the protective state. This is consistent with controlled utility safety and operations and the competency scope of this exam.
2. Which decision best reflects professional responsibility for Management-system objectives, leading and lagging
indicators, audits and management review at a quality-control hold point? Consider the decision with current conditions
documented.
A. Use a previous project record as evidence for the current condition without confirming equivalence
B. Ignore the inconsistent data point solely because most other readings appear normal
C. Document the event or deficiency and confirm corrective action effectiveness before closure
D. Skip the prerequisite check because the schedule is more important than the documented sequence
Correct Answer: C
Explanation: For Management-system objectives, leading and lagging indicators, audits and management review, safety management depends on learning
from deficiencies and verifying that corrective actions actually control the risk. This is consistent with controlled utility safety and operations and the
competency scope of this exam.
3. Which method best prevents an undocumented assumption when dealing with Health surveillance, return-to-work
considerations and protection of confidential information when actual conditions differ from the approved plan? Consider
the decision while maintaining traceable evidence.
A. Document the observed condition, measurements, method, decision and required follow-up before closing the activity
B. Proceed because the same task has been completed successfully on previous jobs
C. Use an instrument or data source without confirming that it is suitable for the decision
D. Treat the first plausible explanation as confirmed without testing it
Correct Answer: A
Explanation: For Health surveillance, return-to-work considerations and protection of confidential information, complete records make the result traceable and
support review, reinspection or corrective action. This is consistent with controlled utility safety and operations and the competency scope of this exam.
4. An unexpected condition arises before making an operating adjustment while evaluating Hazard identification across
physical, chemical, biological, ergonomic and psychosocial exposures. What should be done next? Consider the decision
with current conditions documented.
A. Use the approved procedure and governing requirements rather than relying on memory alone
B. Bypass a protective control temporarily without formal authorization
C. Proceed because the same task has been completed successfully on previous jobs
D. Use an instrument or data source without confirming that it is suitable for the decision
Correct Answer: A
Explanation: For Hazard identification across physical, chemical, biological, ergonomic and psychosocial exposures, approved instructions define the
controlled method and help prevent unauthorized or outdated practices. This is consistent with controlled utility safety and operations and the competency
scope of this exam.
USOLN Certified Utility Safety Professional (CUSP) Green Base Exam Page 1
,5. Which method best prevents an undocumented assumption when dealing with Risk estimation, control selection and
application of the hierarchy of controls while preparing for an audit or independent review? Consider the decision while
maintaining traceable evidence.
A. Confirm calibration or functional checks and the suitability of the instrument range before accepting the reading
B. Make several changes at the same time so the problem is more likely to disappear quickly
C. Bypass a protective control temporarily without formal authorization
D. Proceed because the same task has been completed successfully on previous jobs
Correct Answer: A
Explanation: For Risk estimation, control selection and application of the hierarchy of controls, instrument suitability and verification are necessary before a
measured value can support acceptance. This is consistent with controlled utility safety and operations and the competency scope of this exam.
6. Which decision best reflects professional responsibility for Worker consultation, competent-person duties and
coordination of contractor activities before authorizing the next dependent activity? Consider the decision with current
conditions documented.
A. Confirm calibration or functional checks and the suitability of the instrument range before accepting the reading
B. Close the issue before verifying that corrective action was effective
C. Adjust the result or setting until it matches the expected value without first confirming the cause
D. Record only the final conclusion and omit the supporting observations or measurements
Correct Answer: A
Explanation: For Worker consultation, competent-person duties and coordination of contractor activities, instrument suitability and verification are necessary
before a measured value can support acceptance. This is consistent with controlled utility safety and operations and the competency scope of this exam.
7. Which method best prevents an undocumented assumption when dealing with Exposure assessment, monitoring
strategies and interpretation against occupational limits during a field inspection? Consider the decision while maintaining
traceable evidence.
A. Record only the final conclusion and omit the supporting observations or measurements
B. Document the event or deficiency and confirm corrective action effectiveness before closure
C. Replace a component or revise the design immediately before verifying the actual cause
D. Rely on personal preference when the controlled requirement is available
Correct Answer: B
Explanation: For Exposure assessment, monitoring strategies and interpretation against occupational limits, safety management depends on learning from
deficiencies and verifying that corrective actions actually control the risk. This is consistent with controlled utility safety and operations and the competency
scope of this exam.
8. Which response is most consistent with controlled professional practice for Incident notification, evidence preservation,
investigation and root-cause analysis during troubleshooting? Consider the decision with current conditions documented.
A. Document the observed condition, measurements, method, decision and required follow-up before closing the activity
B. Use a previous project record as evidence for the current condition without confirming equivalence
C. Ignore the inconsistent data point solely because most other readings appear normal
D. Skip the prerequisite check because the schedule is more important than the documented sequence
Correct Answer: A
Explanation: For Incident notification, evidence preservation, investigation and root-cause analysis, complete records make the result traceable and support
review, reinspection or corrective action. This is consistent with controlled utility safety and operations and the competency scope of this exam.
USOLN Certified Utility Safety Professional (CUSP) Green Base Exam Page 2
, 9. What should be verified before accepting work related to Safe systems of work, permits, isolation, emergency
arrangements and rescue planning while reviewing test records? Consider the decision while maintaining traceable
evidence.
A. Close the issue before verifying that corrective action was effective
B. Adjust the result or setting until it matches the expected value without first confirming the cause
C. Record only the final conclusion and omit the supporting observations or measurements
D. Verify isolation, grounding, clearance or protective measures using the procedure applicable to the specific utility hazard
Correct Answer: D
Explanation: For Safe systems of work, permits, isolation, emergency arrangements and rescue planning, high-consequence utility hazards require positive
verification of the protective state. This is consistent with controlled utility safety and operations and the competency scope of this exam.
10. What is the best way to confirm that work on Legal duties, due diligence, records and enforcement consequences has
achieved the intended outcome during final acceptance verification? Consider the decision with current conditions
documented.
A. Document the event or deficiency and confirm corrective action effectiveness before closure
B. Record only the final conclusion and omit the supporting observations or measurements
C. Replace a component or revise the design immediately before verifying the actual cause
D. Rely on personal preference when the controlled requirement is available
Correct Answer: A
Explanation: For Legal duties, due diligence, records and enforcement consequences, safety management depends on learning from deficiencies and verifying
that corrective actions actually control the risk. This is consistent with controlled utility safety and operations and the competency scope of this exam.
11. Which observation related to job briefing, hazard identification and work-zone control most clearly requires further
verification during a compliance review? Consider the decision while maintaining traceable evidence.
A. Use an instrument or data source without confirming that it is suitable for the decision
B. Treat the first plausible explanation as confirmed without testing it
C. Close the issue before verifying that corrective action was effective
D. Investigate likely causes systematically, changing one relevant variable at a time and retaining baseline evidence
Correct Answer: D
Explanation: For job briefing, hazard identification and work-zone control, controlled troubleshooting separates cause from coincidence and protects useful
diagnostic evidence. This is consistent with controlled utility safety and operations and the competency scope of this exam.
12. Which choice best supports safe and compliant work involving minimum approach distances and electrical hazards
when a customer or operator reports poor performance? Consider the decision with current conditions documented.
A. Continue normal operation until the next scheduled inspection even though the discrepancy is unresolved
B. Use a previous project record as evidence for the current condition without confirming equivalence
C. Conduct or update the job briefing, identify the changed hazard, and establish the required controls before work resumes
D. Ignore the inconsistent data point solely because most other readings appear normal
Correct Answer: C
Explanation: For minimum approach distances and electrical hazards, utility work conditions can change rapidly; the job briefing must reflect the actual hazards
before exposure continues. This is consistent with controlled utility safety and operations and the competency scope of this exam.
USOLN Certified Utility Safety Professional (CUSP) Green Base Exam Page 3
Base Exam
USOLN Certified Utility Safety Professional (CUSP) Green Base Exam
,1. Which decision best reflects professional responsibility for Training-needs analysis, competence verification and safety
communication after an unexpected result is observed? Consider the decision while maintaining traceable evidence.
A. Accept a verbal assurance in place of objective evidence
B. Verify isolation, grounding, clearance or protective measures using the procedure applicable to the specific utility hazard
C. Continue normal operation until the next scheduled inspection even though the discrepancy is unresolved
D. Use a previous project record as evidence for the current condition without confirming equivalence
Correct Answer: B
Explanation: For Training-needs analysis, competence verification and safety communication, high-consequence utility hazards require positive verification of
the protective state. This is consistent with controlled utility safety and operations and the competency scope of this exam.
2. Which decision best reflects professional responsibility for Management-system objectives, leading and lagging
indicators, audits and management review at a quality-control hold point? Consider the decision with current conditions
documented.
A. Use a previous project record as evidence for the current condition without confirming equivalence
B. Ignore the inconsistent data point solely because most other readings appear normal
C. Document the event or deficiency and confirm corrective action effectiveness before closure
D. Skip the prerequisite check because the schedule is more important than the documented sequence
Correct Answer: C
Explanation: For Management-system objectives, leading and lagging indicators, audits and management review, safety management depends on learning
from deficiencies and verifying that corrective actions actually control the risk. This is consistent with controlled utility safety and operations and the
competency scope of this exam.
3. Which method best prevents an undocumented assumption when dealing with Health surveillance, return-to-work
considerations and protection of confidential information when actual conditions differ from the approved plan? Consider
the decision while maintaining traceable evidence.
A. Document the observed condition, measurements, method, decision and required follow-up before closing the activity
B. Proceed because the same task has been completed successfully on previous jobs
C. Use an instrument or data source without confirming that it is suitable for the decision
D. Treat the first plausible explanation as confirmed without testing it
Correct Answer: A
Explanation: For Health surveillance, return-to-work considerations and protection of confidential information, complete records make the result traceable and
support review, reinspection or corrective action. This is consistent with controlled utility safety and operations and the competency scope of this exam.
4. An unexpected condition arises before making an operating adjustment while evaluating Hazard identification across
physical, chemical, biological, ergonomic and psychosocial exposures. What should be done next? Consider the decision
with current conditions documented.
A. Use the approved procedure and governing requirements rather than relying on memory alone
B. Bypass a protective control temporarily without formal authorization
C. Proceed because the same task has been completed successfully on previous jobs
D. Use an instrument or data source without confirming that it is suitable for the decision
Correct Answer: A
Explanation: For Hazard identification across physical, chemical, biological, ergonomic and psychosocial exposures, approved instructions define the
controlled method and help prevent unauthorized or outdated practices. This is consistent with controlled utility safety and operations and the competency
scope of this exam.
USOLN Certified Utility Safety Professional (CUSP) Green Base Exam Page 1
,5. Which method best prevents an undocumented assumption when dealing with Risk estimation, control selection and
application of the hierarchy of controls while preparing for an audit or independent review? Consider the decision while
maintaining traceable evidence.
A. Confirm calibration or functional checks and the suitability of the instrument range before accepting the reading
B. Make several changes at the same time so the problem is more likely to disappear quickly
C. Bypass a protective control temporarily without formal authorization
D. Proceed because the same task has been completed successfully on previous jobs
Correct Answer: A
Explanation: For Risk estimation, control selection and application of the hierarchy of controls, instrument suitability and verification are necessary before a
measured value can support acceptance. This is consistent with controlled utility safety and operations and the competency scope of this exam.
6. Which decision best reflects professional responsibility for Worker consultation, competent-person duties and
coordination of contractor activities before authorizing the next dependent activity? Consider the decision with current
conditions documented.
A. Confirm calibration or functional checks and the suitability of the instrument range before accepting the reading
B. Close the issue before verifying that corrective action was effective
C. Adjust the result or setting until it matches the expected value without first confirming the cause
D. Record only the final conclusion and omit the supporting observations or measurements
Correct Answer: A
Explanation: For Worker consultation, competent-person duties and coordination of contractor activities, instrument suitability and verification are necessary
before a measured value can support acceptance. This is consistent with controlled utility safety and operations and the competency scope of this exam.
7. Which method best prevents an undocumented assumption when dealing with Exposure assessment, monitoring
strategies and interpretation against occupational limits during a field inspection? Consider the decision while maintaining
traceable evidence.
A. Record only the final conclusion and omit the supporting observations or measurements
B. Document the event or deficiency and confirm corrective action effectiveness before closure
C. Replace a component or revise the design immediately before verifying the actual cause
D. Rely on personal preference when the controlled requirement is available
Correct Answer: B
Explanation: For Exposure assessment, monitoring strategies and interpretation against occupational limits, safety management depends on learning from
deficiencies and verifying that corrective actions actually control the risk. This is consistent with controlled utility safety and operations and the competency
scope of this exam.
8. Which response is most consistent with controlled professional practice for Incident notification, evidence preservation,
investigation and root-cause analysis during troubleshooting? Consider the decision with current conditions documented.
A. Document the observed condition, measurements, method, decision and required follow-up before closing the activity
B. Use a previous project record as evidence for the current condition without confirming equivalence
C. Ignore the inconsistent data point solely because most other readings appear normal
D. Skip the prerequisite check because the schedule is more important than the documented sequence
Correct Answer: A
Explanation: For Incident notification, evidence preservation, investigation and root-cause analysis, complete records make the result traceable and support
review, reinspection or corrective action. This is consistent with controlled utility safety and operations and the competency scope of this exam.
USOLN Certified Utility Safety Professional (CUSP) Green Base Exam Page 2
, 9. What should be verified before accepting work related to Safe systems of work, permits, isolation, emergency
arrangements and rescue planning while reviewing test records? Consider the decision while maintaining traceable
evidence.
A. Close the issue before verifying that corrective action was effective
B. Adjust the result or setting until it matches the expected value without first confirming the cause
C. Record only the final conclusion and omit the supporting observations or measurements
D. Verify isolation, grounding, clearance or protective measures using the procedure applicable to the specific utility hazard
Correct Answer: D
Explanation: For Safe systems of work, permits, isolation, emergency arrangements and rescue planning, high-consequence utility hazards require positive
verification of the protective state. This is consistent with controlled utility safety and operations and the competency scope of this exam.
10. What is the best way to confirm that work on Legal duties, due diligence, records and enforcement consequences has
achieved the intended outcome during final acceptance verification? Consider the decision with current conditions
documented.
A. Document the event or deficiency and confirm corrective action effectiveness before closure
B. Record only the final conclusion and omit the supporting observations or measurements
C. Replace a component or revise the design immediately before verifying the actual cause
D. Rely on personal preference when the controlled requirement is available
Correct Answer: A
Explanation: For Legal duties, due diligence, records and enforcement consequences, safety management depends on learning from deficiencies and verifying
that corrective actions actually control the risk. This is consistent with controlled utility safety and operations and the competency scope of this exam.
11. Which observation related to job briefing, hazard identification and work-zone control most clearly requires further
verification during a compliance review? Consider the decision while maintaining traceable evidence.
A. Use an instrument or data source without confirming that it is suitable for the decision
B. Treat the first plausible explanation as confirmed without testing it
C. Close the issue before verifying that corrective action was effective
D. Investigate likely causes systematically, changing one relevant variable at a time and retaining baseline evidence
Correct Answer: D
Explanation: For job briefing, hazard identification and work-zone control, controlled troubleshooting separates cause from coincidence and protects useful
diagnostic evidence. This is consistent with controlled utility safety and operations and the competency scope of this exam.
12. Which choice best supports safe and compliant work involving minimum approach distances and electrical hazards
when a customer or operator reports poor performance? Consider the decision with current conditions documented.
A. Continue normal operation until the next scheduled inspection even though the discrepancy is unresolved
B. Use a previous project record as evidence for the current condition without confirming equivalence
C. Conduct or update the job briefing, identify the changed hazard, and establish the required controls before work resumes
D. Ignore the inconsistent data point solely because most other readings appear normal
Correct Answer: C
Explanation: For minimum approach distances and electrical hazards, utility work conditions can change rapidly; the job briefing must reflect the actual hazards
before exposure continues. This is consistent with controlled utility safety and operations and the competency scope of this exam.
USOLN Certified Utility Safety Professional (CUSP) Green Base Exam Page 3
