AMRT STUDY ALL SET QUESTIONS AND
ANSWERS SET A+
✔✔What tool can be used to perform the DOP testing? -✔✔laser particulate counter
✔✔What tool can be used to check the CFM of the AFD? -✔✔anemometer
✔✔What should the remediator do when there is a concern of health effects? -
✔✔document & recommend IEP, recommend occupant consult doctor
✔✔Define pre-existing damage -✔✔prolonged exposure, identified as not part of current
loss
✔✔what is the procedural guideline that the remediator should follow? -✔✔S500 &
S520
✔✔What is the definition of complexity? -✔✔any condition that causes the project to
become more difficult/detailed but doesn't prevent work from being done
✔✔What is the definition of complication -✔✔Arises after the start of work & causes a
change in scope of work
✔✔What is the definition of limitation? -✔✔a restriction placed by others that limits the
scope of work, remediation activities, or expected outcomes
✔✔What is an invasive inspection? -✔✔removal of materials to further investigation
✔✔What should the remediator do when completing an invasive inspection? -✔✔Notify
the client, take care to minimize collateral damage
✔✔The protection factor for a full-face respirator is: -✔✔50
, ✔✔The protection factor for a half-face respirator is: -✔✔10
✔✔Which respirators offer NO protection against oxygen deficient environments? -
✔✔N-95, half/full face, gas, PAPR
✔✔Which respirator offers a positive pressure inside the mask via a battery pack? -
✔✔PAPR
✔✔PAPR -✔✔powered air purifying respirator
✔✔When are air-supplied respirators required? -✔✔insufficient oxygen, extreme
temperatures, high concentrations of dust, fumes, mists, gases, vapor
✔✔When the oxygen exceeds ?% it creates an oxygen-enriched environment -✔✔23.5
✔✔What must the worker do each time they don their respirator? -✔✔conduct a positive
and negative seal check
✔✔What are the maintenance steps that must be done to a half or full-face respirator? -
✔✔clean, store properly, dry, inspect
✔✔What does the P100 of the respirator cartridge remove? -✔✔99.97% of particulates
to 0.3 microns
✔✔What does the organic vapor cartridge remove? -✔✔MVOCs and chemical odors
✔✔P1 disposable suits hold out ____% of dry particulate whereas a P2/P3 holds out
___% of dry particulate. -✔✔90, 100
✔✔What is the last piece of PE that should be removed & why? -✔✔respirator, reduce
potential inhalation exposure
✔✔What is the order to remove (doff) PPE? -✔✔protective suit, gloves, respirator
✔✔What does OSHA require for a respirator program? -✔✔medical eval, fit test,
documented training, selection of respirators
✔✔How should respirator cartridges be stored and why? -✔✔clean & dry, seal with 3"
tape, store in air tight bag; to prevent breakdown
✔✔What is a risk to the technicians by wearing P3 disposable coveralls? -
✔✔overheating
ANSWERS SET A+
✔✔What tool can be used to perform the DOP testing? -✔✔laser particulate counter
✔✔What tool can be used to check the CFM of the AFD? -✔✔anemometer
✔✔What should the remediator do when there is a concern of health effects? -
✔✔document & recommend IEP, recommend occupant consult doctor
✔✔Define pre-existing damage -✔✔prolonged exposure, identified as not part of current
loss
✔✔what is the procedural guideline that the remediator should follow? -✔✔S500 &
S520
✔✔What is the definition of complexity? -✔✔any condition that causes the project to
become more difficult/detailed but doesn't prevent work from being done
✔✔What is the definition of complication -✔✔Arises after the start of work & causes a
change in scope of work
✔✔What is the definition of limitation? -✔✔a restriction placed by others that limits the
scope of work, remediation activities, or expected outcomes
✔✔What is an invasive inspection? -✔✔removal of materials to further investigation
✔✔What should the remediator do when completing an invasive inspection? -✔✔Notify
the client, take care to minimize collateral damage
✔✔The protection factor for a full-face respirator is: -✔✔50
, ✔✔The protection factor for a half-face respirator is: -✔✔10
✔✔Which respirators offer NO protection against oxygen deficient environments? -
✔✔N-95, half/full face, gas, PAPR
✔✔Which respirator offers a positive pressure inside the mask via a battery pack? -
✔✔PAPR
✔✔PAPR -✔✔powered air purifying respirator
✔✔When are air-supplied respirators required? -✔✔insufficient oxygen, extreme
temperatures, high concentrations of dust, fumes, mists, gases, vapor
✔✔When the oxygen exceeds ?% it creates an oxygen-enriched environment -✔✔23.5
✔✔What must the worker do each time they don their respirator? -✔✔conduct a positive
and negative seal check
✔✔What are the maintenance steps that must be done to a half or full-face respirator? -
✔✔clean, store properly, dry, inspect
✔✔What does the P100 of the respirator cartridge remove? -✔✔99.97% of particulates
to 0.3 microns
✔✔What does the organic vapor cartridge remove? -✔✔MVOCs and chemical odors
✔✔P1 disposable suits hold out ____% of dry particulate whereas a P2/P3 holds out
___% of dry particulate. -✔✔90, 100
✔✔What is the last piece of PE that should be removed & why? -✔✔respirator, reduce
potential inhalation exposure
✔✔What is the order to remove (doff) PPE? -✔✔protective suit, gloves, respirator
✔✔What does OSHA require for a respirator program? -✔✔medical eval, fit test,
documented training, selection of respirators
✔✔How should respirator cartridges be stored and why? -✔✔clean & dry, seal with 3"
tape, store in air tight bag; to prevent breakdown
✔✔What is a risk to the technicians by wearing P3 disposable coveralls? -
✔✔overheating
