PDGA Certified Rules Official Exam 2026/2027 | Complete
Practice Questions, Correct Answers & Detailed Rationales
Questions 1–50: Rules Fundamentals, Throws & Playing the Lie
1. What is the primary objective of disc golf?
A. Complete each hole in the fewest throws
B. Complete each hole in the shortest time
C. Finish the course with the longest drives
D. Accumulate the most birdies
Correct Answer: A
Rationale: The objective is to complete the course in the fewest throws.
2. After a player's tee throw, where is the next throw made from?
A. The teeing area
B. The point where the previous throw came to rest
C. The nearest marked drop zone
D. The center of the fairway
Correct Answer: B
Rationale: Successive throws are made from the lie where the previous
throw came to rest, subject to applicable rules.
3. What is a "throw" under the rules?
A. Any practice swing
B. A player intentionally propelling the disc to change its position
C. Any movement of a disc caused by wind
D. A disc touching the target
,Correct Answer: B
Rationale: A throw involves intentionally propelling the disc to change
its position.
4. What normally determines a player's lie after a throw?
A. Where the player believes the disc should be
B. Where the disc came to rest
C. Where the previous player stood
D. Where the disc was first seen
Correct Answer: B
Rationale: The lie is established based on the disc's resulting position,
subject to applicable rules.
5. What is the purpose of a marker disc?
A. To identify the player's division
B. To mark the lie from which the next throw is made
C. To indicate the player's score
D. To identify the teeing order
Correct Answer: B
Rationale: A marker can be used to establish the lie for the next throw.
6. When may a player generally use a mini marker disc?
A. To establish the lie after marking according to the rules
B. Only after holing out
C. Only during practice rounds
D. Only in match play
Correct Answer: A
Rationale: A mini marker disc is one recognized method of marking a
lie.
,7. A player throws from the correct lie and the disc comes to rest.
What normally happens next?
A. The player moves to the next tee
B. The player throws again from the resulting lie
C. The player returns to the previous lie
D. The player must use a mini
Correct Answer: B
Rationale: Each successive throw is normally made from the position
where the previous throw came to rest.
8. What is a teeing area?
A. The entire first fairway
B. The designated area from which a player begins a hole
C. Any flat area near the target
D. Any area marked with OB paint
Correct Answer: B
Rationale: The teeing area is the designated starting area for the hole.
9. What is a target in disc golf?
A. The player's lie
B. The object designated for completing the hole
C. The tee line
D. The nearest obstacle
Correct Answer: B
Rationale: A target is the designated object into which the disc must
come to rest to complete the hole.
10. When does a hole normally begin?
A. When the first player arrives at the target
, B. When the first player throws from the tee
C. When the scorecard is signed
D. When the group reaches the fairway
Correct Answer: B
Rationale: Play on a hole begins at the teeing area.
11. When is a hole completed in standard play?
A. When the player reaches the putting circle
B. When the player's disc comes to rest supported by the target as
required by the rules
C. When the player reaches the target
D. When the player records the score
Correct Answer: B
Rationale: A hole is completed when the disc satisfies the applicable
completion requirements.
12. What should players generally do with the course?
A. Alter obstacles to create better throwing lanes
B. Play the course as they find it
C. Remove all branches near the lie
D. Move permanent obstacles whenever needed
Correct Answer: B
Rationale: Players are generally required to play the course as they find
it.
13. A player moves an obstacle solely to create an easier throwing
lane. What principle is violated?
A. The course must be played as found
B. Players must always throw forehand
Practice Questions, Correct Answers & Detailed Rationales
Questions 1–50: Rules Fundamentals, Throws & Playing the Lie
1. What is the primary objective of disc golf?
A. Complete each hole in the fewest throws
B. Complete each hole in the shortest time
C. Finish the course with the longest drives
D. Accumulate the most birdies
Correct Answer: A
Rationale: The objective is to complete the course in the fewest throws.
2. After a player's tee throw, where is the next throw made from?
A. The teeing area
B. The point where the previous throw came to rest
C. The nearest marked drop zone
D. The center of the fairway
Correct Answer: B
Rationale: Successive throws are made from the lie where the previous
throw came to rest, subject to applicable rules.
3. What is a "throw" under the rules?
A. Any practice swing
B. A player intentionally propelling the disc to change its position
C. Any movement of a disc caused by wind
D. A disc touching the target
,Correct Answer: B
Rationale: A throw involves intentionally propelling the disc to change
its position.
4. What normally determines a player's lie after a throw?
A. Where the player believes the disc should be
B. Where the disc came to rest
C. Where the previous player stood
D. Where the disc was first seen
Correct Answer: B
Rationale: The lie is established based on the disc's resulting position,
subject to applicable rules.
5. What is the purpose of a marker disc?
A. To identify the player's division
B. To mark the lie from which the next throw is made
C. To indicate the player's score
D. To identify the teeing order
Correct Answer: B
Rationale: A marker can be used to establish the lie for the next throw.
6. When may a player generally use a mini marker disc?
A. To establish the lie after marking according to the rules
B. Only after holing out
C. Only during practice rounds
D. Only in match play
Correct Answer: A
Rationale: A mini marker disc is one recognized method of marking a
lie.
,7. A player throws from the correct lie and the disc comes to rest.
What normally happens next?
A. The player moves to the next tee
B. The player throws again from the resulting lie
C. The player returns to the previous lie
D. The player must use a mini
Correct Answer: B
Rationale: Each successive throw is normally made from the position
where the previous throw came to rest.
8. What is a teeing area?
A. The entire first fairway
B. The designated area from which a player begins a hole
C. Any flat area near the target
D. Any area marked with OB paint
Correct Answer: B
Rationale: The teeing area is the designated starting area for the hole.
9. What is a target in disc golf?
A. The player's lie
B. The object designated for completing the hole
C. The tee line
D. The nearest obstacle
Correct Answer: B
Rationale: A target is the designated object into which the disc must
come to rest to complete the hole.
10. When does a hole normally begin?
A. When the first player arrives at the target
, B. When the first player throws from the tee
C. When the scorecard is signed
D. When the group reaches the fairway
Correct Answer: B
Rationale: Play on a hole begins at the teeing area.
11. When is a hole completed in standard play?
A. When the player reaches the putting circle
B. When the player's disc comes to rest supported by the target as
required by the rules
C. When the player reaches the target
D. When the player records the score
Correct Answer: B
Rationale: A hole is completed when the disc satisfies the applicable
completion requirements.
12. What should players generally do with the course?
A. Alter obstacles to create better throwing lanes
B. Play the course as they find it
C. Remove all branches near the lie
D. Move permanent obstacles whenever needed
Correct Answer: B
Rationale: Players are generally required to play the course as they find
it.
13. A player moves an obstacle solely to create an easier throwing
lane. What principle is violated?
A. The course must be played as found
B. Players must always throw forehand
