AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1
"Design for Maintainability" refers to the engineering objective of creating a system that
- ANS-can be easily restored to design specifications while in operation
Under "Reliability Centered Maintenance" (RCM), a system component with High
Probability and Low Severity of failure would be categorized as a ______ component. -
ANS-"Repair High"
"On Condition" components are those that are - ANS-replaced as soon as practicable
after failure
The concept of entropy is a measure of - ANS-Unavailable energy or imperfection
Who determines which systems are not required to fly safely? - ANS-Pilot in Command
An MEL - ANS-Allows deferral of maintenance
The On-Condition (OC) Process requires that the item - ANS-Be periodically inspected
or tested against some appropriate physical standard
The Condition Monitoring (CM) process monitors failure rates, removals etc. of
components that - ANS-Have no noticeable wear out period
What is one of the potential benefits of extending maintenance intervals? -
ANS-Reduced costs
Ensuring the realization of the inherent safety and reliability levels of equipment is
satisfied through - ANS-Scheduled maintenance
The Albuquerque AANC's primary mission is to - ANS-Validate airworthiness assurance;
and evaluate new inspection, maintenance and repair techniques
A _________ check requires specialized test equipment or tools for measurement. -
ANS-Functional
India has strong demand for Falcon 7Xs because of the aircrafts' - ANS-Long range and
15-30% greater fuel efficiency
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
, AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
Of the transportation modes, which industry is the most heavily regulated? -
ANS-Aviation
An AC grants authorization to - ANS-Operate an aircraft in flight
An MEL allows - ANS-An aircraft to fly with certain items inoperative
What is the primary document for an airline's M&E operations? - ANS-TPPM
A Fault Isolation Manual (FIM) uses_______ pinpoint a problem - ANS-Fault Isolation
Trees/ flow diagrams
The airline maintenance manual (as required by AC 120-16D) describes - ANS-How
maintenance will be conducted and how the program will be monitored and improved
What is the function of Planning? - ANS-Coordinating all scheduled maintenance
activities: personnel, facilities, equipment
The planning section of the maintenance program includes - ANS-None of the above
"Off Equipment" restoration activities are typically performed - ANS-in the back shops
A system that is rated as "NOT Mission Capable" is one that is currently - ANS-unable
to perform any of its intended purposes
Under "Reliability Centered Maintenance" (RCM), the items classified as "Repair Low"
require a strategy focused on - ANS-on condition approaches
The design engineer's role is to - ANS-Design a system with low entropy
Chose the answer which correctly lists the order in which a maintenance group will
address a problem.
Determine if the failure is 1. Safety related 2. Hidden or obvious 3. Has operational
impact
And determine 4. Which task to be applied 5. The maintenance interval - ANS-2, 1, 3, 4,
5
Which of the following is NOT a source of structural deterioration? - ANS-Stress
Damage
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1
"Design for Maintainability" refers to the engineering objective of creating a system that
- ANS-can be easily restored to design specifications while in operation
Under "Reliability Centered Maintenance" (RCM), a system component with High
Probability and Low Severity of failure would be categorized as a ______ component. -
ANS-"Repair High"
"On Condition" components are those that are - ANS-replaced as soon as practicable
after failure
The concept of entropy is a measure of - ANS-Unavailable energy or imperfection
Who determines which systems are not required to fly safely? - ANS-Pilot in Command
An MEL - ANS-Allows deferral of maintenance
The On-Condition (OC) Process requires that the item - ANS-Be periodically inspected
or tested against some appropriate physical standard
The Condition Monitoring (CM) process monitors failure rates, removals etc. of
components that - ANS-Have no noticeable wear out period
What is one of the potential benefits of extending maintenance intervals? -
ANS-Reduced costs
Ensuring the realization of the inherent safety and reliability levels of equipment is
satisfied through - ANS-Scheduled maintenance
The Albuquerque AANC's primary mission is to - ANS-Validate airworthiness assurance;
and evaluate new inspection, maintenance and repair techniques
A _________ check requires specialized test equipment or tools for measurement. -
ANS-Functional
India has strong demand for Falcon 7Xs because of the aircrafts' - ANS-Long range and
15-30% greater fuel efficiency
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
, AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
Of the transportation modes, which industry is the most heavily regulated? -
ANS-Aviation
An AC grants authorization to - ANS-Operate an aircraft in flight
An MEL allows - ANS-An aircraft to fly with certain items inoperative
What is the primary document for an airline's M&E operations? - ANS-TPPM
A Fault Isolation Manual (FIM) uses_______ pinpoint a problem - ANS-Fault Isolation
Trees/ flow diagrams
The airline maintenance manual (as required by AC 120-16D) describes - ANS-How
maintenance will be conducted and how the program will be monitored and improved
What is the function of Planning? - ANS-Coordinating all scheduled maintenance
activities: personnel, facilities, equipment
The planning section of the maintenance program includes - ANS-None of the above
"Off Equipment" restoration activities are typically performed - ANS-in the back shops
A system that is rated as "NOT Mission Capable" is one that is currently - ANS-unable
to perform any of its intended purposes
Under "Reliability Centered Maintenance" (RCM), the items classified as "Repair Low"
require a strategy focused on - ANS-on condition approaches
The design engineer's role is to - ANS-Design a system with low entropy
Chose the answer which correctly lists the order in which a maintenance group will
address a problem.
Determine if the failure is 1. Safety related 2. Hidden or obvious 3. Has operational
impact
And determine 4. Which task to be applied 5. The maintenance interval - ANS-2, 1, 3, 4,
5
Which of the following is NOT a source of structural deterioration? - ANS-Stress
Damage
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
AVMG 3600 test 1 (1).pdf@@@@@@@@@@@@@##########!!!@
