» » »
ASNT Industrial Radiography
Radiation Safety Questions & Answers
2026-2027 | Certification Review
Document Overview
This document provides 223 verified questions with correct answers covering essential
industrial radiography radiation safety principles. It serves as a comprehensive review tool,
directly aligning with certification preparation by offering a structured way to reinforce
knowledge of key concepts and terminology. This resource is ideal for students seeking to
solidify their understanding and prepare effectively for their certification exams.
100% Accurate Questions and Answers 100% Guarantee Pass - Verified by Experts
Expert-Verified
Verified Answers · 223 Questions · September 2026
ASNT Industrial Radiography Radiation Safety Questions & Answers 2026-2027 | Certification Review - Practice Questions Page 0
, Topics Covered
Section 1: Radiation Units and Definitions
Questions covering radiation Units and Definitions concepts.
Section 2: Atomic Structure and Particles
Questions covering atomic Structure and Particles concepts.
Section 3: Radiation Measurement and Detection
Questions covering radiation Measurement and Detection concepts.
Section 4: Regulatory and Safety Practices
Questions covering regulatory and Safety Practices concepts.
Section 5: Half-Life and Decay
Questions covering half-Life and Decay concepts.
Section 6: Radiation Physics and Constants
Questions covering radiation Physics and Constants concepts.
Section 7: Shielding and Attenuation
Questions covering shielding and Attenuation concepts.
Section 8: Transportation of Radioactive Materials
Questions covering transportation of Radioactive Materials concepts.
Section 9: Historical Context and Discoveries
Questions covering historical Context and Discoveries concepts.
Questions
QUESTION 1 OF 223
The Symbol R means:
a. rem
b. rad
c. roentgen
d. radiation
Correct Answer: c. roentgen
QUESTION 2 OF 223
The acronym rad means:
a. radiation absorbed dose
b. roentgen absorbed dose
c. roentgen acquired dose
d. radiation at death
Correct Answer: a. radiation absorbed dose
ASNT Industrial Radiography Radiation Safety Questions & Answers 2026-2027 | Certification Review - Practice Questions Page 0
, QUESTION 3 OF 223
The roentgen (R) exposure is measured in:
a. tissue
b. water
c. a lab
d. air
Correct Answer: d. air
QUESTION 4 OF 223
The symbol mR means:
a. milliroentgen
b. microroentgen
c. megaroentgen
d. millirem
Correct Answer: a. milliroentgen
QUESTION 5 OF 223
One roentgen or 1 R is equal to:
a. 100 milliroentgen
b. 1000 milliroentgen
c. 0.001 milliroentgen
d. 1 milliroentgen
Correct Answer: b. 1000 milliroentgen
QUESTION 6 OF 223
The acronym rem stands for:
a. radiation equivalent man
b. radiation effect man
c. roentgen effect man
d. roentgen equivalent man
Correct Answer: d. roentgen equivalent man
QUESTION 7 OF 223
The initialism QF stands for:
a. quantity factor
b. quality frequency
c. quality factor
d. quality effective factor
Correct Answer: c. quality factor
ASNT Industrial Radiography Radiation Safety Questions & Answers 2026-2027 | Certification Review - Practice Questions Page 0
, QUESTION 8 OF 223
The quality factor for X-rays and gamma rays is:
a. 1
b. 2
c. 10
d. 20
Correct Answer: a. 1
QUESTION 9 OF 223
The quality factor for alpha (ray) particles is:
a. 1
b. 2
c. 10
d. 20
Correct Answer: d. 20
QUESTION 10 OF 223
Activity of radioactive material is measured in:
a. curies
b. roentgens
c. sieverts
d. grays
Correct Answer: a. curies
QUESTION 11 OF 223
Becquerels and curies are units of measurement of:
a. physical size of the source
b. gray per hour
c. decay rate
d. roentgen per hour
Correct Answer: c. decay rate
QUESTION 12 OF 223
Atoms that have excess energy and are unstable are known as:
a. radioactive
b. radioactivity
c. balanced
d. weighted
Correct Answer: a. radioactive
ASNT Industrial Radiography Radiation Safety Questions & Answers 2026-2027 | Certification Review - Practice Questions Page 0
ASNT Industrial Radiography
Radiation Safety Questions & Answers
2026-2027 | Certification Review
Document Overview
This document provides 223 verified questions with correct answers covering essential
industrial radiography radiation safety principles. It serves as a comprehensive review tool,
directly aligning with certification preparation by offering a structured way to reinforce
knowledge of key concepts and terminology. This resource is ideal for students seeking to
solidify their understanding and prepare effectively for their certification exams.
100% Accurate Questions and Answers 100% Guarantee Pass - Verified by Experts
Expert-Verified
Verified Answers · 223 Questions · September 2026
ASNT Industrial Radiography Radiation Safety Questions & Answers 2026-2027 | Certification Review - Practice Questions Page 0
, Topics Covered
Section 1: Radiation Units and Definitions
Questions covering radiation Units and Definitions concepts.
Section 2: Atomic Structure and Particles
Questions covering atomic Structure and Particles concepts.
Section 3: Radiation Measurement and Detection
Questions covering radiation Measurement and Detection concepts.
Section 4: Regulatory and Safety Practices
Questions covering regulatory and Safety Practices concepts.
Section 5: Half-Life and Decay
Questions covering half-Life and Decay concepts.
Section 6: Radiation Physics and Constants
Questions covering radiation Physics and Constants concepts.
Section 7: Shielding and Attenuation
Questions covering shielding and Attenuation concepts.
Section 8: Transportation of Radioactive Materials
Questions covering transportation of Radioactive Materials concepts.
Section 9: Historical Context and Discoveries
Questions covering historical Context and Discoveries concepts.
Questions
QUESTION 1 OF 223
The Symbol R means:
a. rem
b. rad
c. roentgen
d. radiation
Correct Answer: c. roentgen
QUESTION 2 OF 223
The acronym rad means:
a. radiation absorbed dose
b. roentgen absorbed dose
c. roentgen acquired dose
d. radiation at death
Correct Answer: a. radiation absorbed dose
ASNT Industrial Radiography Radiation Safety Questions & Answers 2026-2027 | Certification Review - Practice Questions Page 0
, QUESTION 3 OF 223
The roentgen (R) exposure is measured in:
a. tissue
b. water
c. a lab
d. air
Correct Answer: d. air
QUESTION 4 OF 223
The symbol mR means:
a. milliroentgen
b. microroentgen
c. megaroentgen
d. millirem
Correct Answer: a. milliroentgen
QUESTION 5 OF 223
One roentgen or 1 R is equal to:
a. 100 milliroentgen
b. 1000 milliroentgen
c. 0.001 milliroentgen
d. 1 milliroentgen
Correct Answer: b. 1000 milliroentgen
QUESTION 6 OF 223
The acronym rem stands for:
a. radiation equivalent man
b. radiation effect man
c. roentgen effect man
d. roentgen equivalent man
Correct Answer: d. roentgen equivalent man
QUESTION 7 OF 223
The initialism QF stands for:
a. quantity factor
b. quality frequency
c. quality factor
d. quality effective factor
Correct Answer: c. quality factor
ASNT Industrial Radiography Radiation Safety Questions & Answers 2026-2027 | Certification Review - Practice Questions Page 0
, QUESTION 8 OF 223
The quality factor for X-rays and gamma rays is:
a. 1
b. 2
c. 10
d. 20
Correct Answer: a. 1
QUESTION 9 OF 223
The quality factor for alpha (ray) particles is:
a. 1
b. 2
c. 10
d. 20
Correct Answer: d. 20
QUESTION 10 OF 223
Activity of radioactive material is measured in:
a. curies
b. roentgens
c. sieverts
d. grays
Correct Answer: a. curies
QUESTION 11 OF 223
Becquerels and curies are units of measurement of:
a. physical size of the source
b. gray per hour
c. decay rate
d. roentgen per hour
Correct Answer: c. decay rate
QUESTION 12 OF 223
Atoms that have excess energy and are unstable are known as:
a. radioactive
b. radioactivity
c. balanced
d. weighted
Correct Answer: a. radioactive
ASNT Industrial Radiography Radiation Safety Questions & Answers 2026-2027 | Certification Review - Practice Questions Page 0
