INTERSECTION SAFETY PRACTICE Exam
Questions and Correct Answers (Verified
Answers) Plus Rationales | 2026 /2027
Q&A | Instant Download Pdf.
1. What is the primary reason intersections require increased
attention from drivers?
A. They usually have lower speed limits
B. They contain fewer traffic signs
C. They involve multiple traffic movements and conflicting paths
D. They are generally wider than other roadways
Answer: C. They involve multiple traffic movements and conflicting
paths
Intersections create numerous potential conflict points because vehicles,
pedestrians, cyclists, and turning movements converge in the same
area. Drivers must therefore increase observation, anticipate other road
users, and be prepared to respond to unexpected actions.
2. When approaching an intersection with a green traffic signal, a
driver should:
A. Assume cross traffic will stop
B. Maintain awareness and check for hazards before proceeding
,C. Accelerate aggressively to clear the intersection
D. Ignore pedestrians because the signal is green
Answer: B. Maintain awareness and check for hazards before
proceeding
Having a green signal permits movement but does not eliminate
hazards. A driver should still scan the intersection for vehicles running a
red light, pedestrians, cyclists, emergency vehicles, and other
unexpected hazards.
3. What is the safest approach when a traffic signal changes from
green to yellow?
A. Always accelerate to beat the red light
B. Stop if it can be done safely
C. Immediately reverse
D. Continue without checking traffic conditions
Answer: B. Stop if it can be done safely
A yellow signal generally warns that the signal is about to change to
red. The appropriate response is to stop when a safe stop can be made
rather than accelerating unnecessarily through the intersection.
4. At a stop sign, a driver should stop:
A. Only if another vehicle is approaching
B. After entering the intersection
C. Before the stop line or designated stopping point
D. Beside the crosswalk
,Answer: C. Before the stop line or designated stopping point
A proper stop must occur at the designated stopping position, such as
the stop line. This allows the driver to comply with the traffic control
device while maintaining an appropriate view of approaching traffic and
pedestrians.
5. Why should drivers scan left and right before entering an
intersection?
A. To determine whether the road surface is clean
B. To identify possible conflicting traffic and vulnerable road users
C. To estimate fuel consumption
D. To determine the nearest parking area
Answer: B. To identify possible conflicting traffic and vulnerable road
users
Scanning in both directions helps identify vehicles, cyclists, pedestrians,
and other hazards that may conflict with the driver's intended path. This
visual check is especially important when another road user may fail to
obey a traffic control device.
6. What should a driver do when visibility at an intersection is
obstructed?
A. Maintain speed because traffic control devices provide protection
B. Accelerate through the intersection
C. Reduce speed and proceed only when the path is adequately visible
, and safe
D. Sound the horn continuously and proceed at normal speed
Answer: C. Reduce speed and proceed only when the path is
adequately visible and safe
Obstructed visibility increases the possibility of encountering a vehicle,
pedestrian, or cyclist unexpectedly. Reducing speed gives the driver
more time to observe developing hazards and react appropriately.
7. A vehicle approaching an intersection has its turn signal activated.
What should you assume?
A. The vehicle will definitely turn
B. The vehicle will definitely stop
C. The vehicle may turn, but its actual movement must still be
monitored
D. The vehicle has priority over all other traffic
Answer: C. The vehicle may turn, but its actual movement must still be
monitored
Turn signals communicate intentions but do not guarantee that a driver
will follow through correctly. Defensive driving requires monitoring the
vehicle's position and movement rather than relying solely on the signal.
8. What is a major danger of following another vehicle too closely
near an intersection?
A. Increased fuel efficiency
B. Reduced ability to see and react to changing traffic conditions
Questions and Correct Answers (Verified
Answers) Plus Rationales | 2026 /2027
Q&A | Instant Download Pdf.
1. What is the primary reason intersections require increased
attention from drivers?
A. They usually have lower speed limits
B. They contain fewer traffic signs
C. They involve multiple traffic movements and conflicting paths
D. They are generally wider than other roadways
Answer: C. They involve multiple traffic movements and conflicting
paths
Intersections create numerous potential conflict points because vehicles,
pedestrians, cyclists, and turning movements converge in the same
area. Drivers must therefore increase observation, anticipate other road
users, and be prepared to respond to unexpected actions.
2. When approaching an intersection with a green traffic signal, a
driver should:
A. Assume cross traffic will stop
B. Maintain awareness and check for hazards before proceeding
,C. Accelerate aggressively to clear the intersection
D. Ignore pedestrians because the signal is green
Answer: B. Maintain awareness and check for hazards before
proceeding
Having a green signal permits movement but does not eliminate
hazards. A driver should still scan the intersection for vehicles running a
red light, pedestrians, cyclists, emergency vehicles, and other
unexpected hazards.
3. What is the safest approach when a traffic signal changes from
green to yellow?
A. Always accelerate to beat the red light
B. Stop if it can be done safely
C. Immediately reverse
D. Continue without checking traffic conditions
Answer: B. Stop if it can be done safely
A yellow signal generally warns that the signal is about to change to
red. The appropriate response is to stop when a safe stop can be made
rather than accelerating unnecessarily through the intersection.
4. At a stop sign, a driver should stop:
A. Only if another vehicle is approaching
B. After entering the intersection
C. Before the stop line or designated stopping point
D. Beside the crosswalk
,Answer: C. Before the stop line or designated stopping point
A proper stop must occur at the designated stopping position, such as
the stop line. This allows the driver to comply with the traffic control
device while maintaining an appropriate view of approaching traffic and
pedestrians.
5. Why should drivers scan left and right before entering an
intersection?
A. To determine whether the road surface is clean
B. To identify possible conflicting traffic and vulnerable road users
C. To estimate fuel consumption
D. To determine the nearest parking area
Answer: B. To identify possible conflicting traffic and vulnerable road
users
Scanning in both directions helps identify vehicles, cyclists, pedestrians,
and other hazards that may conflict with the driver's intended path. This
visual check is especially important when another road user may fail to
obey a traffic control device.
6. What should a driver do when visibility at an intersection is
obstructed?
A. Maintain speed because traffic control devices provide protection
B. Accelerate through the intersection
C. Reduce speed and proceed only when the path is adequately visible
, and safe
D. Sound the horn continuously and proceed at normal speed
Answer: C. Reduce speed and proceed only when the path is
adequately visible and safe
Obstructed visibility increases the possibility of encountering a vehicle,
pedestrian, or cyclist unexpectedly. Reducing speed gives the driver
more time to observe developing hazards and react appropriately.
7. A vehicle approaching an intersection has its turn signal activated.
What should you assume?
A. The vehicle will definitely turn
B. The vehicle will definitely stop
C. The vehicle may turn, but its actual movement must still be
monitored
D. The vehicle has priority over all other traffic
Answer: C. The vehicle may turn, but its actual movement must still be
monitored
Turn signals communicate intentions but do not guarantee that a driver
will follow through correctly. Defensive driving requires monitoring the
vehicle's position and movement rather than relying solely on the signal.
8. What is a major danger of following another vehicle too closely
near an intersection?
A. Increased fuel efficiency
B. Reduced ability to see and react to changing traffic conditions
