AVMG 3600 TEST 1 UPDATED ACTUAL QUESTIONS
AND CORRECT ANSWERS
Question:
1. "Reliability" is a measure of
Answer:
how long a piece of equipment performs its intended function
Question:
2. "On Condition" components are those that are
Answer:
replaced when certain observable conditions are met prior to failure
Question:
3. Reliability in design will result in
Answer:
more availability over time as the system is operated
Question:
4. An MEL
Answer:
Allows deferral of maintenance
Question:
5. ___________ focus on minimizing a system's entropy, while
_____________ combat the increase of entropy
Answer:
Design engineers; mechanics
Question:
6. Convention piston-driven engines are divided into two
categories:
Answer:
horizontally opposed and radial
Question:
7. Hard time (HT) requires that the item
Answer:
Be removed and completely overhauled, partially overhauled, or discarded
before exceeding a specific interval
, Question:
8. The On-Condition (OC) Process requires that the item
Answer:
Be periodically inspected or tested against some appropriate physical standard
Question:
9. Maintenance Steering Group (MSG)-3 is also known as
the ___________ approach
Answer:
Top Down
Question:
10. Which of the following is an objective of an airline
maintenance program?
Answer:
None of the above
Question:
11. Although only 5% of engine parts require this type of test,
it is essential to identifying abnormalities on, and just
below the surface
Answer:
MPI
Question:
12. Boeing's 787 will reduce total costs by adding two unique
performance measures:
Answer:
Reduced maintenance cost & increased aircraft availability
Question:
13. _________ confirms that the aircraft has been inspected,
conforms with its type certificate, and is in airworthy
condition.
Answer:
Airworthiness certificate
Question:
14. The CQI concept in aviation
Answer:
Seeks continuous quality improvement in aviation
AND CORRECT ANSWERS
Question:
1. "Reliability" is a measure of
Answer:
how long a piece of equipment performs its intended function
Question:
2. "On Condition" components are those that are
Answer:
replaced when certain observable conditions are met prior to failure
Question:
3. Reliability in design will result in
Answer:
more availability over time as the system is operated
Question:
4. An MEL
Answer:
Allows deferral of maintenance
Question:
5. ___________ focus on minimizing a system's entropy, while
_____________ combat the increase of entropy
Answer:
Design engineers; mechanics
Question:
6. Convention piston-driven engines are divided into two
categories:
Answer:
horizontally opposed and radial
Question:
7. Hard time (HT) requires that the item
Answer:
Be removed and completely overhauled, partially overhauled, or discarded
before exceeding a specific interval
, Question:
8. The On-Condition (OC) Process requires that the item
Answer:
Be periodically inspected or tested against some appropriate physical standard
Question:
9. Maintenance Steering Group (MSG)-3 is also known as
the ___________ approach
Answer:
Top Down
Question:
10. Which of the following is an objective of an airline
maintenance program?
Answer:
None of the above
Question:
11. Although only 5% of engine parts require this type of test,
it is essential to identifying abnormalities on, and just
below the surface
Answer:
MPI
Question:
12. Boeing's 787 will reduce total costs by adding two unique
performance measures:
Answer:
Reduced maintenance cost & increased aircraft availability
Question:
13. _________ confirms that the aircraft has been inspected,
conforms with its type certificate, and is in airworthy
condition.
Answer:
Airworthiness certificate
Question:
14. The CQI concept in aviation
Answer:
Seeks continuous quality improvement in aviation
