AWS SENSE LEVEL 1 MODULE 7: GTAW UPDATED ACTUAL QUESTIONS AND CORRECT ANSWERS

AWS SENSE LEVEL 1 MODULE 7: GTAW UPDATED
ACTUAL QUESTIONS AND CORRECT ANSWERS

Question:
1. What filler metals are not used for oxyacetylene welding
Answer:
Copper-coated mild steel

Question:
2. Filler metal used for GTAW are similar in classification as those used for
Answer:
GMAW

Question:
3. Filler metals must be of the same composition as the
Answer:
Base metal

Question:
4. You do not always use filler metal when welding with the
Answer:
GTAW process

Question:
5. The electrode classification EWP indicates a
Answer:
Pure tungsten electrode

Question:
6. It is necessary to keep the hot end of the filler wire in the
Answer:
Gas-shielding zone

Question:
7. Which process produces no spatter and requires limited post-weld cleaning.
Answer:
GTAW

Question:
8. Shielding gas flow rates should be increased when welding in the
Answer:
Overhead position

Question:
9. What is a good process for high quality welds on a wide variety of metals

, Answer:
GTAW

Question:
10. GTAW is also commonly referred to as
Answer:
Tungsten Inert Gas and Heliarc Welding

Question:
11. Ceriated Tungsten
Answer:
Brown

Question:
12. 2% Thoriated Tungsten
Answer:
Red

Question:
13. Pure Tungsten
Answer:
Green

Question:
14. Zirconiated Tungsten
Answer:
Yellow

Question:
15. Lanthanated Tungsten
Answer:
Black

Question:
16. Magnesium
Answer:
AC

Question:
17. Mild steel
Answer:
DCEN

Question:
18. Aluminum