NYC WELDER LICENSE –
Licensing & Credential Requirements
1. What NYC agency is responsible for issuing the NYC Welder License?
A) New York State Department of Labor
B) NYC Department of Buildings
C) NYC Department of Transportation
D) Department of Citywide Administrative Services
Correct Answer: B) NYC Department of Buildings
Rationale: The NYC Department of Buildings (DOB) is the licensing authority for NYC Welders. The
license applies to structural welding work covered by NYC requirements. Applicants must satisfy
DOB's qualification process and obtain the required welding certification. The current process is
administered through DOB's Licensing & Exams system and DOB NOW: Licensing.
2. What is the minimum age listed by NYC DOB for a new Welder License applicant?
A) 16
B) 17
C) 18
D) 21
Correct Answer: C) 18
Rationale: NYC DOB requires a Welder License applicant to be at least 18 years old. This is a licensing
eligibility requirement rather than a technical welding qualification. Applicants must also satisfy
other requirements, including English literacy and character and fitness requirements established by
the Department.
3. Which ability does NYC DOB specifically require from Welder License applicants?
A) Ability to read and write English
B) Ability to speak three languages
C) Ability to draft architectural plans
D) Ability to operate construction cranes
Correct Answer: A) Ability to read and write English
Rationale: NYC DOB identifies the ability to read and write English as one of the basic qualifications
for a Welder License. This requirement is separate from the welding certification itself. Applicants
must satisfy all applicable eligibility requirements before completing the licensing process.
4. Which organization can provide a qualifying welding certification accepted by NYC DOB?
A) American Welding Society
B) Federal Aviation Administration
,C) National Association of Realtors
D) Occupational Safety and Health Administration
Correct Answer: A) American Welding Society
Rationale: NYC DOB recognizes qualifying welding certifications issued by the American Welding
Society (AWS) or the State of New York. The certification must meet the applicable requirements for
the welding work performed. OSHA, by contrast, is primarily a workplace safety regulator rather than
the issuer of this welder certification.
5. Which New York State organization can provide an alternative qualifying certification?
A) NYSDOT
B) NYSED
C) NYS DMV
D) NYSDEC
Correct Answer: A) NYSDOT
Rationale: NYC DOB identifies the New York State Department of Transportation (NYSDOT) as an
alternative certification authority. Its Field Welder Certification can satisfy the applicable NYC
requirement when the specified qualifications are met. This provides a second recognized certification
pathway for applicants.
6. What welding process is specifically identified in NYC DOB's certification requirements?
A) GTAW
B) SMAW
C) GMAW
D) SAW
Correct Answer: B) SMAW
Rationale: NYC DOB's published Welder License requirements identify Manual-Shielded Metal Arc
Welding, commonly abbreviated SMAW, for the qualifying AWS and NYSDOT certification routes. The
licensing requirement is tied to the specified certification rather than simply to general welding
experience.
7. What does SMAW stand for?
A) Shielded Metal Arc Welding
B) Structural Metal Assembly Welding
C) Standard Mechanical Arc Work
D) Shielded Mechanical Assembly Welding
Correct Answer: A) Shielded Metal Arc Welding
Rationale: SMAW stands for Shielded Metal Arc Welding. It is also commonly associated with the
term “stick welding.” In the NYC licensing context, SMAW is specifically named in the accepted
, certification requirements. Understanding the abbreviation is useful when interpreting licensing
documentation.
8. Which positions are identified in the qualifying NYC certification requirements?
A) Flat only
B) Flat and horizontal only
C) Flat, horizontal, vertical, and overhead
D) Vertical only
Correct Answer: C) Flat, horizontal, vertical, and overhead
Rationale: NYC DOB specifies certification covering groove and fillet welding in flat, horizontal,
vertical, and overhead positions. The requirement is intended to establish broad qualification rather
than qualification in only one position. Applicants should verify the exact certification documentation
before applying.
9. Which position designations are specifically mentioned by NYC DOB?
A) 1F and 2F
B) 3G and 4G
C) 5G and 6G only
D) 1G only
Correct Answer: B) 3G and 4G
Rationale: NYC DOB's published requirements specifically reference 3G and 4G certification. These
designations relate to welding qualification positions. The applicant must ensure that the certification
card or documentation demonstrates the required qualifications rather than assuming that any
welding certificate automatically qualifies.
10. What base metal is identified in the NYC DOB qualifying certification requirements?
A) A36
B) A500 only
C) Stainless steel only
D) Aluminum only
Correct Answer: A) A36
Rationale: NYC DOB specifically identifies A36 as the base metal for the listed qualifying certification
requirements. This is an important detail because certification requirements are not interchangeable
simply because two qualifications involve welding. Applicants should compare their actual
certification documentation with DOB's current requirements.
11. What thickness designation is identified in NYC DOB's requirements?
Licensing & Credential Requirements
1. What NYC agency is responsible for issuing the NYC Welder License?
A) New York State Department of Labor
B) NYC Department of Buildings
C) NYC Department of Transportation
D) Department of Citywide Administrative Services
Correct Answer: B) NYC Department of Buildings
Rationale: The NYC Department of Buildings (DOB) is the licensing authority for NYC Welders. The
license applies to structural welding work covered by NYC requirements. Applicants must satisfy
DOB's qualification process and obtain the required welding certification. The current process is
administered through DOB's Licensing & Exams system and DOB NOW: Licensing.
2. What is the minimum age listed by NYC DOB for a new Welder License applicant?
A) 16
B) 17
C) 18
D) 21
Correct Answer: C) 18
Rationale: NYC DOB requires a Welder License applicant to be at least 18 years old. This is a licensing
eligibility requirement rather than a technical welding qualification. Applicants must also satisfy
other requirements, including English literacy and character and fitness requirements established by
the Department.
3. Which ability does NYC DOB specifically require from Welder License applicants?
A) Ability to read and write English
B) Ability to speak three languages
C) Ability to draft architectural plans
D) Ability to operate construction cranes
Correct Answer: A) Ability to read and write English
Rationale: NYC DOB identifies the ability to read and write English as one of the basic qualifications
for a Welder License. This requirement is separate from the welding certification itself. Applicants
must satisfy all applicable eligibility requirements before completing the licensing process.
4. Which organization can provide a qualifying welding certification accepted by NYC DOB?
A) American Welding Society
B) Federal Aviation Administration
,C) National Association of Realtors
D) Occupational Safety and Health Administration
Correct Answer: A) American Welding Society
Rationale: NYC DOB recognizes qualifying welding certifications issued by the American Welding
Society (AWS) or the State of New York. The certification must meet the applicable requirements for
the welding work performed. OSHA, by contrast, is primarily a workplace safety regulator rather than
the issuer of this welder certification.
5. Which New York State organization can provide an alternative qualifying certification?
A) NYSDOT
B) NYSED
C) NYS DMV
D) NYSDEC
Correct Answer: A) NYSDOT
Rationale: NYC DOB identifies the New York State Department of Transportation (NYSDOT) as an
alternative certification authority. Its Field Welder Certification can satisfy the applicable NYC
requirement when the specified qualifications are met. This provides a second recognized certification
pathway for applicants.
6. What welding process is specifically identified in NYC DOB's certification requirements?
A) GTAW
B) SMAW
C) GMAW
D) SAW
Correct Answer: B) SMAW
Rationale: NYC DOB's published Welder License requirements identify Manual-Shielded Metal Arc
Welding, commonly abbreviated SMAW, for the qualifying AWS and NYSDOT certification routes. The
licensing requirement is tied to the specified certification rather than simply to general welding
experience.
7. What does SMAW stand for?
A) Shielded Metal Arc Welding
B) Structural Metal Assembly Welding
C) Standard Mechanical Arc Work
D) Shielded Mechanical Assembly Welding
Correct Answer: A) Shielded Metal Arc Welding
Rationale: SMAW stands for Shielded Metal Arc Welding. It is also commonly associated with the
term “stick welding.” In the NYC licensing context, SMAW is specifically named in the accepted
, certification requirements. Understanding the abbreviation is useful when interpreting licensing
documentation.
8. Which positions are identified in the qualifying NYC certification requirements?
A) Flat only
B) Flat and horizontal only
C) Flat, horizontal, vertical, and overhead
D) Vertical only
Correct Answer: C) Flat, horizontal, vertical, and overhead
Rationale: NYC DOB specifies certification covering groove and fillet welding in flat, horizontal,
vertical, and overhead positions. The requirement is intended to establish broad qualification rather
than qualification in only one position. Applicants should verify the exact certification documentation
before applying.
9. Which position designations are specifically mentioned by NYC DOB?
A) 1F and 2F
B) 3G and 4G
C) 5G and 6G only
D) 1G only
Correct Answer: B) 3G and 4G
Rationale: NYC DOB's published requirements specifically reference 3G and 4G certification. These
designations relate to welding qualification positions. The applicant must ensure that the certification
card or documentation demonstrates the required qualifications rather than assuming that any
welding certificate automatically qualifies.
10. What base metal is identified in the NYC DOB qualifying certification requirements?
A) A36
B) A500 only
C) Stainless steel only
D) Aluminum only
Correct Answer: A) A36
Rationale: NYC DOB specifically identifies A36 as the base metal for the listed qualifying certification
requirements. This is an important detail because certification requirements are not interchangeable
simply because two qualifications involve welding. Applicants should compare their actual
certification documentation with DOB's current requirements.
11. What thickness designation is identified in NYC DOB's requirements?
