NEIEP 200 Final Exam | NEIEP Hoistway Structures 200
Study Guide & Exam Prep 2026/2027 | Elevator
Apprentice Training, Tools & Material Handling, Rigging
& Hoisting, Pit Structures, Guide Rails & Rail
Installation, Machine & Sheave Installation, Elevator
Control Equipment, Car & Counterweight Assembly,
Suspension Means, Inspection & Safety, Practice
Questions, Answers & Detailed Rationales
Question 1: You are preparing to unload a truck at the loading dock, and the
truck bed is 8 inches higher than the dock. What is the correct and safest
action to take?
A. Use the forklift to push the truck closer to the dock.
B. Use a steel plate to span the gap.
C. Wait for the driver to reposition the truck.
D. Jump the gap while carrying materials.
CORRECT ANSWER: B. Use a steel plate to span the gap.
Rationale: When a truck bed is higher than the loading dock, a steel plate or dock board
should be used to safely bridge the gap and height difference, providing a stable surface
for material handling equipment and personnel .
Question 2: After completing a surface inspection of a manila rope intended for
hoisting, what method should you use to conduct a thorough internal
inspection?
A. Perform a visual check for discoloration.
B. Flex the rope repeatedly to listen for cracking.
C. Slightly untwist the strands to examine the inner fibers.
D. Check the tags for the manufacturing date.
CORRECT ANSWER: C. Slightly untwist the strands to examine the inner
fibers.
Rationale: A proper internal inspection of manila rope requires slightly untwisting the
strands to expose the inner fibers. This allows the inspector to check for internal wear,
deterioration, or damage that is not visible from the exterior .
Question 3: When preparing to hoist steel guide rails, you are inspecting the
manila rope. Which characteristic indicates that the rope is in good condition?
A. A dark brown color with a rough texture.
B. A light yellow color with a silvery or pearly luster.
C. A bleached white appearance.
D. A greenish tint due to moisture.
CORRECT ANSWER: B. A light yellow color with a silvery or pearly luster.
,Rationale: Manila rope in good condition typically has a light yellow color and a silvery
or pearly luster. Darkening, discoloration, or a rough texture are signs of age, wear, or
damage .
Question 4: A mechanic attaches a chainfall to a hoisting beam using a beam
clamp. What is the effect on the hoisting beam's capacity?
A. It is reduced to 50% of its original capacity.
B. It remains unchanged.
C. It is increased by 25%.
D. It is reduced to 75% of its original capacity.
CORRECT ANSWER: A. It is reduced to 50% of its original capacity.
Rationale: Attaching a chainfall or other load to a hoisting beam with a beam clamp
typically creates a point load that can reduce the beam's safe working load capacity,
often to 50% of its original capacity, depending on the beam and clamp specifications .
Question 5: You are rigging elevator equipment with a sling angle of 60
degrees, using a shouldered eye bolt with a tapped 1/2" diameter hole. Once
the shoulder is fully seated, what is the minimum thread depth required for
safe rigging?
A. At least 1/4".
B. At least 1/2".
C. At least 3/4".
D. At least 1".
CORRECT ANSWER: C. At least 3/4".
Rationale: For a shouldered eye bolt, especially when used at an angle, there must be
sufficient thread engagement to ensure the bolt does not pull out. For a 1/2" diameter
hole, a minimum thread depth of 3/4" (1.5 times the diameter) is generally required .
Question 6: You need to hoist a 1,000 lb. load using a single-leg vertical hitch.
What will be the load on the sling when the load is lifted and suspended in the
air?
A. 500 lbs.
B. 707 lbs.
C. 1,000 lbs.
D. 2,000 lbs.
CORRECT ANSWER: C. 1,000 lbs.
Rationale: In a single-leg vertical hitch, the load on the sling is equal to the weight of the
suspended load. The full 1,000 lbs. is transmitted directly to the sling, assuming a
straight vertical lift .
Question 7: You must attach a wire rope to a load by creating an eye with three
u-bolt wire rope clips. How should the clips be correctly attached?
,A. Nuts facing the live end of the rope.
B. Nuts facing the dead end of the rope.
C. All nuts on the same side.
D. No nuts on a dead horse.
CORRECT ANSWER: D. No nuts on a dead horse.
Rationale: This phrase, "no nuts on a dead horse," is a common mnemonic in rigging. It
means that for U-bolt wire rope clips, the U-bolt (the "nuts") must be placed over the
dead end (the short, unused end) of the rope, and the saddle must be on the live end
(the "horse") .
Question 8: You are using a bowline knot to secure a load. What is one known
disadvantage of this knot?
A. It is extremely difficult to untie after being loaded.
B. It can easily loosen when not under load.
C. It is prone to jamming.
D. It reduces the rope's breaking strength by 50%.
CORRECT ANSWER: B. It can easily loosen when not under load.
Rationale: While the bowline is a secure and strong knot for forming a loop, it is known
to shake loose or loosen easily if it is not under a constant load .
Question 9: You are preparing to lift a load and need to securely tie the ends of
two ropes of equal diameter together. Which knot should you use?
A. Bowline.
B. Clove hitch.
C. Square knot.
D. Sheet bend.
CORRECT ANSWER: C. Square knot.
Rationale: The square knot (or reef knot) is a standard knot used for tying the ends of
two ropes of similar size together for a non-critical application such as hoisting or
securing a load .
Question 10: You are inspecting a sling and note the rated load tag is 2,000 lbs.
What does this rating represent?
A. The breaking strength of the sling.
B. The load limit that can be picked and held.
C. The weight of the sling itself.
D. The maximum load for a choker hitch only.
CORRECT ANSWER: B. The load limit that can be picked and held.
, Rationale: The rated load tag on a sling indicates the maximum load the sling is
designed and tested to safely lift and hold under specific conditions. It is not the
breaking strength, which is typically higher .
Question 11: You need to lift guide rails to the top floor of a building using a
well wheel at the top of the hoistway. Which type of rope is best suited for this
application?
A. Manila rope.
B. Synthetic rope.
C. Fiber core wire rope.
D. Sisal rope.
CORRECT ANSWER: B. Synthetic rope.
Rationale: Synthetic ropes are often preferred for hoisting operations, especially over
sheaves, due to their strength-to-weight ratio, flexibility, and resistance to rot and
mildew compared to natural fiber ropes .
Question 12: A crane is needed to hoist controllers onto the roof of a building.
Who is ultimately responsible for making the lift plan?
A. The crane operator.
B. The rigger.
C. The lift director.
D. The project foreman.
CORRECT ANSWER: C. The lift director.
Rationale: The lift director is the designated competent person responsible for planning
and overseeing all crane and rigging operations, including the development and
execution of the lift plan .
Question 13: During an elevator installation, you need to rig equipment to the
top of the building. What information must be included in the lift plan?
A. The weather forecast.
B. The manufacturer of the crane.
C. The capacity of the rigging material.
D. The cost of the lift.
CORRECT ANSWER: C. The capacity of the rigging material.
Rationale: A lift plan is a detailed document that includes critical information to ensure a
safe lift. This includes, but is not limited to, the weight of the load, the capacity of the
rigging materials, the crane's capacity, and the center of gravity .
Question 14: The crane operator is awaiting your signals to lift a pallet of
parts. What is the correct sequence of audible signals to raise the load 20 feet?
Study Guide & Exam Prep 2026/2027 | Elevator
Apprentice Training, Tools & Material Handling, Rigging
& Hoisting, Pit Structures, Guide Rails & Rail
Installation, Machine & Sheave Installation, Elevator
Control Equipment, Car & Counterweight Assembly,
Suspension Means, Inspection & Safety, Practice
Questions, Answers & Detailed Rationales
Question 1: You are preparing to unload a truck at the loading dock, and the
truck bed is 8 inches higher than the dock. What is the correct and safest
action to take?
A. Use the forklift to push the truck closer to the dock.
B. Use a steel plate to span the gap.
C. Wait for the driver to reposition the truck.
D. Jump the gap while carrying materials.
CORRECT ANSWER: B. Use a steel plate to span the gap.
Rationale: When a truck bed is higher than the loading dock, a steel plate or dock board
should be used to safely bridge the gap and height difference, providing a stable surface
for material handling equipment and personnel .
Question 2: After completing a surface inspection of a manila rope intended for
hoisting, what method should you use to conduct a thorough internal
inspection?
A. Perform a visual check for discoloration.
B. Flex the rope repeatedly to listen for cracking.
C. Slightly untwist the strands to examine the inner fibers.
D. Check the tags for the manufacturing date.
CORRECT ANSWER: C. Slightly untwist the strands to examine the inner
fibers.
Rationale: A proper internal inspection of manila rope requires slightly untwisting the
strands to expose the inner fibers. This allows the inspector to check for internal wear,
deterioration, or damage that is not visible from the exterior .
Question 3: When preparing to hoist steel guide rails, you are inspecting the
manila rope. Which characteristic indicates that the rope is in good condition?
A. A dark brown color with a rough texture.
B. A light yellow color with a silvery or pearly luster.
C. A bleached white appearance.
D. A greenish tint due to moisture.
CORRECT ANSWER: B. A light yellow color with a silvery or pearly luster.
,Rationale: Manila rope in good condition typically has a light yellow color and a silvery
or pearly luster. Darkening, discoloration, or a rough texture are signs of age, wear, or
damage .
Question 4: A mechanic attaches a chainfall to a hoisting beam using a beam
clamp. What is the effect on the hoisting beam's capacity?
A. It is reduced to 50% of its original capacity.
B. It remains unchanged.
C. It is increased by 25%.
D. It is reduced to 75% of its original capacity.
CORRECT ANSWER: A. It is reduced to 50% of its original capacity.
Rationale: Attaching a chainfall or other load to a hoisting beam with a beam clamp
typically creates a point load that can reduce the beam's safe working load capacity,
often to 50% of its original capacity, depending on the beam and clamp specifications .
Question 5: You are rigging elevator equipment with a sling angle of 60
degrees, using a shouldered eye bolt with a tapped 1/2" diameter hole. Once
the shoulder is fully seated, what is the minimum thread depth required for
safe rigging?
A. At least 1/4".
B. At least 1/2".
C. At least 3/4".
D. At least 1".
CORRECT ANSWER: C. At least 3/4".
Rationale: For a shouldered eye bolt, especially when used at an angle, there must be
sufficient thread engagement to ensure the bolt does not pull out. For a 1/2" diameter
hole, a minimum thread depth of 3/4" (1.5 times the diameter) is generally required .
Question 6: You need to hoist a 1,000 lb. load using a single-leg vertical hitch.
What will be the load on the sling when the load is lifted and suspended in the
air?
A. 500 lbs.
B. 707 lbs.
C. 1,000 lbs.
D. 2,000 lbs.
CORRECT ANSWER: C. 1,000 lbs.
Rationale: In a single-leg vertical hitch, the load on the sling is equal to the weight of the
suspended load. The full 1,000 lbs. is transmitted directly to the sling, assuming a
straight vertical lift .
Question 7: You must attach a wire rope to a load by creating an eye with three
u-bolt wire rope clips. How should the clips be correctly attached?
,A. Nuts facing the live end of the rope.
B. Nuts facing the dead end of the rope.
C. All nuts on the same side.
D. No nuts on a dead horse.
CORRECT ANSWER: D. No nuts on a dead horse.
Rationale: This phrase, "no nuts on a dead horse," is a common mnemonic in rigging. It
means that for U-bolt wire rope clips, the U-bolt (the "nuts") must be placed over the
dead end (the short, unused end) of the rope, and the saddle must be on the live end
(the "horse") .
Question 8: You are using a bowline knot to secure a load. What is one known
disadvantage of this knot?
A. It is extremely difficult to untie after being loaded.
B. It can easily loosen when not under load.
C. It is prone to jamming.
D. It reduces the rope's breaking strength by 50%.
CORRECT ANSWER: B. It can easily loosen when not under load.
Rationale: While the bowline is a secure and strong knot for forming a loop, it is known
to shake loose or loosen easily if it is not under a constant load .
Question 9: You are preparing to lift a load and need to securely tie the ends of
two ropes of equal diameter together. Which knot should you use?
A. Bowline.
B. Clove hitch.
C. Square knot.
D. Sheet bend.
CORRECT ANSWER: C. Square knot.
Rationale: The square knot (or reef knot) is a standard knot used for tying the ends of
two ropes of similar size together for a non-critical application such as hoisting or
securing a load .
Question 10: You are inspecting a sling and note the rated load tag is 2,000 lbs.
What does this rating represent?
A. The breaking strength of the sling.
B. The load limit that can be picked and held.
C. The weight of the sling itself.
D. The maximum load for a choker hitch only.
CORRECT ANSWER: B. The load limit that can be picked and held.
, Rationale: The rated load tag on a sling indicates the maximum load the sling is
designed and tested to safely lift and hold under specific conditions. It is not the
breaking strength, which is typically higher .
Question 11: You need to lift guide rails to the top floor of a building using a
well wheel at the top of the hoistway. Which type of rope is best suited for this
application?
A. Manila rope.
B. Synthetic rope.
C. Fiber core wire rope.
D. Sisal rope.
CORRECT ANSWER: B. Synthetic rope.
Rationale: Synthetic ropes are often preferred for hoisting operations, especially over
sheaves, due to their strength-to-weight ratio, flexibility, and resistance to rot and
mildew compared to natural fiber ropes .
Question 12: A crane is needed to hoist controllers onto the roof of a building.
Who is ultimately responsible for making the lift plan?
A. The crane operator.
B. The rigger.
C. The lift director.
D. The project foreman.
CORRECT ANSWER: C. The lift director.
Rationale: The lift director is the designated competent person responsible for planning
and overseeing all crane and rigging operations, including the development and
execution of the lift plan .
Question 13: During an elevator installation, you need to rig equipment to the
top of the building. What information must be included in the lift plan?
A. The weather forecast.
B. The manufacturer of the crane.
C. The capacity of the rigging material.
D. The cost of the lift.
CORRECT ANSWER: C. The capacity of the rigging material.
Rationale: A lift plan is a detailed document that includes critical information to ensure a
safe lift. This includes, but is not limited to, the weight of the load, the capacity of the
rigging materials, the crane's capacity, and the center of gravity .
Question 14: The crane operator is awaiting your signals to lift a pallet of
parts. What is the correct sequence of audible signals to raise the load 20 feet?
