SDI FTE 211 COURSE 1911 ADVANCED ARMORER EXAM WITH
COMPLETE SOLUTIONS 100% VERIFIED!!!! LATEST UPDATE
ALREADY GRADED A+
(Week 5) You are performing a safety check on the 1911. You pull the hammer rearward, and the sear is
engaged and locked in place. If the grip safety is not depressed when the trigger is pulled, what, if
anything, should happen to the hammer? - (ANSWER)The hammer should not fall
(Week 5) If the cartridge does not discharge when the operator presses the trigger, this is likely an issue
with the __________ step. - (ANSWER)Firing
(Week 5) When live ammunition must be used to test fire, the test fire should be done at the gun range
or into a bullet __________. - (ANSWER)Trap
(Week 5) When performing a test fire, it is important to use both factory ammunition and: -
(ANSWER)Dummy ammunition
(Week 5) When a cartridge has been fed properly, it will move up the feed ramp and into the
__________ smoothly and without any problems. - (ANSWER)Chamber
(Week 5) It is important for a gunsmith to have safety at the forefront of their mind whenever handling
firearms. One of the industry-established rules for handling firearms is to treat every firearm as if: -
(ANSWER)It is loaded
(Week 5) In the 1911 platform, before doing a trigger pull test, you must first deactivate the: -
(ANSWER)Grip safety
(Week 5) In the 1911 platform, the following components are most likely to affect the locking step: recoil
spring assembly, barrel, and - (ANSWER)Slide
(Week 5) Bulging in a semi-automatic handgun is not usually a safety hazard and is considered normal
wear and tear. - (ANSWER)False
(Week 5) Determining the __________ rate of the barrel for a customer allows a gunsmith to inform the
customer of how well the weight of projectiles will perform in their firearm. - (ANSWER)Twist
, SDI FTE 211 COURSE 1911 ADVANCED ARMORER EXAM WITH
COMPLETE SOLUTIONS 100% VERIFIED!!!! LATEST UPDATE
ALREADY GRADED A+
(Week 1) What does SAAMI stand for? - (ANSWER)Sporting Arms and Ammunition Manufacturers'
Institute
(Week 1) What were the main limitations of the 1911's original size? - (ANSWER)Difficulty to carry and
its weight
(Week 1) After the pistol was assigned the military designation of M1911, what was the very first
company that gave it full scale production? - (ANSWER)Colt Firearm Company
(Week 1) The Colt Automatic Pistol was originally chambered for what cartridge? - (ANSWER).38
Automatic Colt Pistol (ACP)
(Week 1) When was the 1911 Officer introduced? - (ANSWER)In the 1970s. However, it wasn't ready for
civilian use until 1985.
(Week 1) What was the very first production version of what would become the model 1911 called? -
(ANSWER)Colt Model 1900 aka the Colt Automatic Pistol
(Week 1) The barrel bushing in the original series 70 1911 handgun is a ________ style: -
(ANSWER)Collet
(Week 1) What does the term "full metal jacket" mean? - (ANSWER)A projectile that has a lead core and
copper or hard metal that either partially or totally encases its core metal.
(Week 1) Series 80 1911s are no longer available for purchase: - (ANSWER)False
(Week 1) Despite the platform's previous glowing reputation, the Colt Model __________ failed
numerous test before these complaints were given to Colt to make changes. - (ANSWER)1910
COMPLETE SOLUTIONS 100% VERIFIED!!!! LATEST UPDATE
ALREADY GRADED A+
(Week 5) You are performing a safety check on the 1911. You pull the hammer rearward, and the sear is
engaged and locked in place. If the grip safety is not depressed when the trigger is pulled, what, if
anything, should happen to the hammer? - (ANSWER)The hammer should not fall
(Week 5) If the cartridge does not discharge when the operator presses the trigger, this is likely an issue
with the __________ step. - (ANSWER)Firing
(Week 5) When live ammunition must be used to test fire, the test fire should be done at the gun range
or into a bullet __________. - (ANSWER)Trap
(Week 5) When performing a test fire, it is important to use both factory ammunition and: -
(ANSWER)Dummy ammunition
(Week 5) When a cartridge has been fed properly, it will move up the feed ramp and into the
__________ smoothly and without any problems. - (ANSWER)Chamber
(Week 5) It is important for a gunsmith to have safety at the forefront of their mind whenever handling
firearms. One of the industry-established rules for handling firearms is to treat every firearm as if: -
(ANSWER)It is loaded
(Week 5) In the 1911 platform, before doing a trigger pull test, you must first deactivate the: -
(ANSWER)Grip safety
(Week 5) In the 1911 platform, the following components are most likely to affect the locking step: recoil
spring assembly, barrel, and - (ANSWER)Slide
(Week 5) Bulging in a semi-automatic handgun is not usually a safety hazard and is considered normal
wear and tear. - (ANSWER)False
(Week 5) Determining the __________ rate of the barrel for a customer allows a gunsmith to inform the
customer of how well the weight of projectiles will perform in their firearm. - (ANSWER)Twist
, SDI FTE 211 COURSE 1911 ADVANCED ARMORER EXAM WITH
COMPLETE SOLUTIONS 100% VERIFIED!!!! LATEST UPDATE
ALREADY GRADED A+
(Week 1) What does SAAMI stand for? - (ANSWER)Sporting Arms and Ammunition Manufacturers'
Institute
(Week 1) What were the main limitations of the 1911's original size? - (ANSWER)Difficulty to carry and
its weight
(Week 1) After the pistol was assigned the military designation of M1911, what was the very first
company that gave it full scale production? - (ANSWER)Colt Firearm Company
(Week 1) The Colt Automatic Pistol was originally chambered for what cartridge? - (ANSWER).38
Automatic Colt Pistol (ACP)
(Week 1) When was the 1911 Officer introduced? - (ANSWER)In the 1970s. However, it wasn't ready for
civilian use until 1985.
(Week 1) What was the very first production version of what would become the model 1911 called? -
(ANSWER)Colt Model 1900 aka the Colt Automatic Pistol
(Week 1) The barrel bushing in the original series 70 1911 handgun is a ________ style: -
(ANSWER)Collet
(Week 1) What does the term "full metal jacket" mean? - (ANSWER)A projectile that has a lead core and
copper or hard metal that either partially or totally encases its core metal.
(Week 1) Series 80 1911s are no longer available for purchase: - (ANSWER)False
(Week 1) Despite the platform's previous glowing reputation, the Colt Model __________ failed
numerous test before these complaints were given to Colt to make changes. - (ANSWER)1910
