Maryland Journeyman Plumber/Gas
Fitter Exam Practice Questions And
Correct Answers (Verified Answers)
Plus Rationale 2027 Q&A| Instant
Download Pdf.
1. Under Maryland licensing requirements, which combination of
qualifications is required before an applicant may obtain a
Journeyman Plumber/Gas Fitter license?
A. Two years as an apprentice, 3,750 hours of training, and 16 hours of
backflow training
B. Three years as an apprentice, 5,000 hours of training, and no backflow
training
C. Four years as an apprentice, 7,500 hours of training, 32 hours of
backflow-prevention-device testing training, and successful completion
of the examination
D. Five years as an apprentice, 10,000 hours of training, and a master
plumber recommendation
The Maryland Board requires at least four years holding an apprentice
license, 7,500 hours of training under the direction and control of a
licensed master plumber/gas fitter, 32 hours of backflow-prevention-
,device testing training, and passage of the comprehensive written
examination.
2. The Maryland Journeyman Plumber/Gas Fitter examination is
administered through which testing organization?
A. ICC directly
B. Maryland Department of Labor testing division
C. Prometric
D. PSI Examination Services
PSI Examination Services provides the testing services for Maryland's
plumbing and gas-fitter licensing examinations, including the Journey
Plumber/Gas Fitter examination.
3. According to the Maryland examination content outline, how many
questions are included on the Journey Plumber/Gas Fitter
examination?
A. 75
B. 80
C. 100
D. 125
The Maryland PSI examination bulletin specifies 100 questions for the
Journey Plumber/Gas Fitter examination.
4. What is the minimum passing score identified in the Maryland PSI
examination content outline for the Journey Plumber/Gas Fitter
examination?
,A. 60%
B. 65%
C. 70%
D. 75%
The PSI content outline identifies 70% as the minimum passing score for
the Journey Plumber/Gas Fitter examination.
5. What is the examination time allowed for the Maryland Journey
Plumber/Gas Fitter examination according to the PSI content
outline?
A. 120 minutes
B. 180 minutes
C. 200 minutes
D. 240 minutes
The examination outline provides 240 minutes, or four hours, for the
100-question Journey Plumber/Gas Fitter examination.
6. Which examination subject represents the largest portion of the
Maryland Journey Plumber/Gas Fitter examination?
A. Water supply systems
B. Drain, waste, and vent systems
C. Backflow prevention
D. Gas appliances and piping
Gas appliances and piping account for 40 questions, making this the
largest subject area on the Journey Plumber/Gas Fitter examination.
, 7. How many examination questions are allocated to gas appliances
and piping on the Maryland Journey Plumber/Gas Fitter
examination?
A. 20
B. 25
C. 30
D. 40
The official PSI content outline assigns 40 of the 100 examination
questions to gas appliances and piping, making this an especially
important study area.
8. How many questions are allocated to drain, waste, and vent systems
on the Journey Plumber/Gas Fitter examination?
A. 8
B. 10
C. 13
D. 15
The examination content outline assigns 13 questions to drain, waste,
and vent systems, making it the second-largest listed technical subject
after gas appliances and piping.
9. How many questions are allocated to backflow prevention?
A. 5
B. 8
Fitter Exam Practice Questions And
Correct Answers (Verified Answers)
Plus Rationale 2027 Q&A| Instant
Download Pdf.
1. Under Maryland licensing requirements, which combination of
qualifications is required before an applicant may obtain a
Journeyman Plumber/Gas Fitter license?
A. Two years as an apprentice, 3,750 hours of training, and 16 hours of
backflow training
B. Three years as an apprentice, 5,000 hours of training, and no backflow
training
C. Four years as an apprentice, 7,500 hours of training, 32 hours of
backflow-prevention-device testing training, and successful completion
of the examination
D. Five years as an apprentice, 10,000 hours of training, and a master
plumber recommendation
The Maryland Board requires at least four years holding an apprentice
license, 7,500 hours of training under the direction and control of a
licensed master plumber/gas fitter, 32 hours of backflow-prevention-
,device testing training, and passage of the comprehensive written
examination.
2. The Maryland Journeyman Plumber/Gas Fitter examination is
administered through which testing organization?
A. ICC directly
B. Maryland Department of Labor testing division
C. Prometric
D. PSI Examination Services
PSI Examination Services provides the testing services for Maryland's
plumbing and gas-fitter licensing examinations, including the Journey
Plumber/Gas Fitter examination.
3. According to the Maryland examination content outline, how many
questions are included on the Journey Plumber/Gas Fitter
examination?
A. 75
B. 80
C. 100
D. 125
The Maryland PSI examination bulletin specifies 100 questions for the
Journey Plumber/Gas Fitter examination.
4. What is the minimum passing score identified in the Maryland PSI
examination content outline for the Journey Plumber/Gas Fitter
examination?
,A. 60%
B. 65%
C. 70%
D. 75%
The PSI content outline identifies 70% as the minimum passing score for
the Journey Plumber/Gas Fitter examination.
5. What is the examination time allowed for the Maryland Journey
Plumber/Gas Fitter examination according to the PSI content
outline?
A. 120 minutes
B. 180 minutes
C. 200 minutes
D. 240 minutes
The examination outline provides 240 minutes, or four hours, for the
100-question Journey Plumber/Gas Fitter examination.
6. Which examination subject represents the largest portion of the
Maryland Journey Plumber/Gas Fitter examination?
A. Water supply systems
B. Drain, waste, and vent systems
C. Backflow prevention
D. Gas appliances and piping
Gas appliances and piping account for 40 questions, making this the
largest subject area on the Journey Plumber/Gas Fitter examination.
, 7. How many examination questions are allocated to gas appliances
and piping on the Maryland Journey Plumber/Gas Fitter
examination?
A. 20
B. 25
C. 30
D. 40
The official PSI content outline assigns 40 of the 100 examination
questions to gas appliances and piping, making this an especially
important study area.
8. How many questions are allocated to drain, waste, and vent systems
on the Journey Plumber/Gas Fitter examination?
A. 8
B. 10
C. 13
D. 15
The examination content outline assigns 13 questions to drain, waste,
and vent systems, making it the second-largest listed technical subject
after gas appliances and piping.
9. How many questions are allocated to backflow prevention?
A. 5
B. 8
