Georgia Fire Protection Contractor
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2027 Q&A| Instant Download
Pdf. (Sprinkler Systems)
1. Under Georgia’s Fire Sprinkler Act and implementing regulations,
which individual is primarily responsible for demonstrating the
competence required to serve as a certificate holder for a fire
protection sprinkler contractor?
A. Any employee who has completed OSHA training
B. A person holding a Georgia plumbing license
C. An individual who satisfies the required competency requirements,
including the applicable NICET Level III or IV automatic sprinkler system
layout certification or examination requirements
D. Any employee who has completed an NFPA 25 inspection course
,Rationale: Georgia requires a certificate holder to demonstrate
competence and knowledge of water-based fire protection systems. The
applicable rule recognizes current NICET Level III or Level IV certification in
automatic sprinkler system layout and permits other examinations
designated by the Commissioner.
2. What is the principal purpose of the Georgia fire protection sprinkler
contractor license?
A. To authorize a contractor to perform only portable fire-extinguisher
servicing
B. To authorize a contractor to engage in the fabrication, installation,
repair, alteration, maintenance, or inspection of water-based fire
protection systems
C. To authorize a contractor to conduct electrical inspections
D. To authorize a contractor to perform structural engineering services
Rationale: Georgia defines a fire protection sprinkler contractor license as
authorization to engage in specified activities involving water-based fire
protection systems, including fabrication, installation, repair, alteration,
maintenance, and inspection.
3. A Georgia sprinkler contractor operates from three separate office
locations where sprinkler design and installation activities are
conducted. What licensing requirement applies?
,A. Only the headquarters must be licensed
B. One statewide license covers all locations automatically
C. Each qualifying office location must be separately licensed
D. Only locations containing fabrication equipment must be licensed
Rationale: Georgia rules provide that where a fire protection sprinkler
contractor has multiple office locations used for covered activities, each
location is separately licensed.
4. Before a Georgia fire protection sprinkler contractor can obtain its
contractor license, which insurance requirement must be satisfied?
A. Workers' compensation insurance of $500,000
B. Automobile liability insurance of $250,000
C. Comprehensive liability insurance of at least $1 million covering
property loss or personal injury caused by the sprinkler contractor
D. Professional liability insurance of at least $100,000
Rationale: Georgia requires comprehensive liability coverage of not less
than $1 million for a sprinkler contractor, with coverage for property loss
or personal injury caused by the contractor.
5. Which organization currently administers Georgia’s professional
licensing functions for fire suppression professionals?
, A. Georgia Department of Labor
B. Georgia State Licensing Board for Residential and General Contractors
C. Office of the Commissioner of Insurance and Safety Fire
D. Georgia Environmental Protection Division
Rationale: The Office of the Commissioner of Insurance and Safety Fire
issues certificates of competency to fire sprinkler contractors and licenses
applicable fire suppression professionals.
6. Which NFPA standard is specifically associated with the inspection,
testing, and maintenance of water-based fire protection systems
under Georgia’s rules?
A. NFPA 10
B. NFPA 20
C. NFPA 25
D. NFPA 72
Rationale: Georgia’s rules require inspections, testing, and maintenance of
water-based fire protection systems to comply with NFPA 25 as adopted by
the Georgia Safety Fire Commissioner.
7. Which NFPA standard primarily governs the installation of automatic
sprinkler systems in ordinary commercial and industrial occupancies?
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2027 Q&A| Instant Download
Pdf. (Sprinkler Systems)
1. Under Georgia’s Fire Sprinkler Act and implementing regulations,
which individual is primarily responsible for demonstrating the
competence required to serve as a certificate holder for a fire
protection sprinkler contractor?
A. Any employee who has completed OSHA training
B. A person holding a Georgia plumbing license
C. An individual who satisfies the required competency requirements,
including the applicable NICET Level III or IV automatic sprinkler system
layout certification or examination requirements
D. Any employee who has completed an NFPA 25 inspection course
,Rationale: Georgia requires a certificate holder to demonstrate
competence and knowledge of water-based fire protection systems. The
applicable rule recognizes current NICET Level III or Level IV certification in
automatic sprinkler system layout and permits other examinations
designated by the Commissioner.
2. What is the principal purpose of the Georgia fire protection sprinkler
contractor license?
A. To authorize a contractor to perform only portable fire-extinguisher
servicing
B. To authorize a contractor to engage in the fabrication, installation,
repair, alteration, maintenance, or inspection of water-based fire
protection systems
C. To authorize a contractor to conduct electrical inspections
D. To authorize a contractor to perform structural engineering services
Rationale: Georgia defines a fire protection sprinkler contractor license as
authorization to engage in specified activities involving water-based fire
protection systems, including fabrication, installation, repair, alteration,
maintenance, and inspection.
3. A Georgia sprinkler contractor operates from three separate office
locations where sprinkler design and installation activities are
conducted. What licensing requirement applies?
,A. Only the headquarters must be licensed
B. One statewide license covers all locations automatically
C. Each qualifying office location must be separately licensed
D. Only locations containing fabrication equipment must be licensed
Rationale: Georgia rules provide that where a fire protection sprinkler
contractor has multiple office locations used for covered activities, each
location is separately licensed.
4. Before a Georgia fire protection sprinkler contractor can obtain its
contractor license, which insurance requirement must be satisfied?
A. Workers' compensation insurance of $500,000
B. Automobile liability insurance of $250,000
C. Comprehensive liability insurance of at least $1 million covering
property loss or personal injury caused by the sprinkler contractor
D. Professional liability insurance of at least $100,000
Rationale: Georgia requires comprehensive liability coverage of not less
than $1 million for a sprinkler contractor, with coverage for property loss
or personal injury caused by the contractor.
5. Which organization currently administers Georgia’s professional
licensing functions for fire suppression professionals?
, A. Georgia Department of Labor
B. Georgia State Licensing Board for Residential and General Contractors
C. Office of the Commissioner of Insurance and Safety Fire
D. Georgia Environmental Protection Division
Rationale: The Office of the Commissioner of Insurance and Safety Fire
issues certificates of competency to fire sprinkler contractors and licenses
applicable fire suppression professionals.
6. Which NFPA standard is specifically associated with the inspection,
testing, and maintenance of water-based fire protection systems
under Georgia’s rules?
A. NFPA 10
B. NFPA 20
C. NFPA 25
D. NFPA 72
Rationale: Georgia’s rules require inspections, testing, and maintenance of
water-based fire protection systems to comply with NFPA 25 as adopted by
the Georgia Safety Fire Commissioner.
7. Which NFPA standard primarily governs the installation of automatic
sprinkler systems in ordinary commercial and industrial occupancies?
