WSSOC Annex D Study Guide Questions with
Verified Correct Answers
Where on VSAT-L do you ground the MRT?
Any bare metal inside of the EEU
Prior to conducting any active mission operations, it is recommended to do a _____ to
ensure all the components are operational.
LTI or PMCS
To console into the NCM on the AMRT, the website address you must use is _____
10.10.1.4.30000
What are the two ways you can console into the CBM-400/E modems utilizing Secure
CRT?
SSH2 & SERIAL
When initially setting up your MRT, & the MRT is ZERIOIZED, the user must put the
modem on _____ when not using encryption.
bypass
You're attempting to console into the CBM-400/E modem via SecureCRT for the
AMRT. For this session you decide to use SSH2 as the protocol. The hostname will be
_____ & the username will be _____.
10.10.1.4 & ROOT
When conducting an IF loopback, the -30 attenuator adapter must be connected on the
_____ side of the IF loop coaxial cable.
, Tx
The CBM-400/E has the capability of _____ & _____ encryption.
Transec & Passphrase
What software do you utilize to create the encryption keys for the CBM-400/E?
SecureCRT
What is the AMRT NMS GUI website?
10.10.1.4.30000
You're attempting to create a console session in Secure CRT for your CBM-400/E MRT
modem. In order to do so the session requires to select a COM port. How do you
find/know which com port to use?
Device Manager
For a SERIAL SecureCRT session to console into a modem, what should the baud rate
be?
115200
Where do you connect the MRT into the VSAT-L?
Rack 1 MRT Rx TX
What is the Protocol you are supposed to use when consoling into SECUREFX to
extract bootfiles?
SCP
The terminal ID for the MRT is 0x_____. The terminal ID for the AMRT is 0x_____.
120 & 140
Verified Correct Answers
Where on VSAT-L do you ground the MRT?
Any bare metal inside of the EEU
Prior to conducting any active mission operations, it is recommended to do a _____ to
ensure all the components are operational.
LTI or PMCS
To console into the NCM on the AMRT, the website address you must use is _____
10.10.1.4.30000
What are the two ways you can console into the CBM-400/E modems utilizing Secure
CRT?
SSH2 & SERIAL
When initially setting up your MRT, & the MRT is ZERIOIZED, the user must put the
modem on _____ when not using encryption.
bypass
You're attempting to console into the CBM-400/E modem via SecureCRT for the
AMRT. For this session you decide to use SSH2 as the protocol. The hostname will be
_____ & the username will be _____.
10.10.1.4 & ROOT
When conducting an IF loopback, the -30 attenuator adapter must be connected on the
_____ side of the IF loop coaxial cable.
, Tx
The CBM-400/E has the capability of _____ & _____ encryption.
Transec & Passphrase
What software do you utilize to create the encryption keys for the CBM-400/E?
SecureCRT
What is the AMRT NMS GUI website?
10.10.1.4.30000
You're attempting to create a console session in Secure CRT for your CBM-400/E MRT
modem. In order to do so the session requires to select a COM port. How do you
find/know which com port to use?
Device Manager
For a SERIAL SecureCRT session to console into a modem, what should the baud rate
be?
115200
Where do you connect the MRT into the VSAT-L?
Rack 1 MRT Rx TX
What is the Protocol you are supposed to use when consoling into SECUREFX to
extract bootfiles?
SCP
The terminal ID for the MRT is 0x_____. The terminal ID for the AMRT is 0x_____.
120 & 140
