PIPEFITTER STAR EXAM PART 2 WITH 100%
ACCURATE ANSWERS UPDATED 2026/2027
BEST SOLUTION RATED A+ FOR SUCCESS
Lockout/Tagout
Standard procedure used to safely de-energize equipment on circuits before they
are worked on:
Fall hazards, Electrical hazards, Caught in, Struck by
Four focus inspectioin OSHA compliance officers look for:
Plane End Square Cut (PESC)
Thread and Coupling (T&C)
Thread Both Ends (TBE)
Steel pipe is supplied with the following end finish:
Start/Stop, Regulate/Throttle, Relief, Reduce
Four principle functions of valves
125F
Never expose any part of a compressed gas cylinder to temperatures above:
350F
Max service temperature of a brazed joint?
Straight, Choker, Basket
Three basic hitches which can be used for lifting with a sling
6300F
Oxyacetylene flame has a peak temperature of roughly:
Immediate danger to Live and Health
IDLH in regards to OSHA stands for
, PIPEFITTER STAR EXAM PART 2 WITH 100%
ACCURATE ANSWERS UPDATED 2026/2027
BEST SOLUTION RATED A+ FOR SUCCESS
Inhalation, ingestion, absorption, and injection.
Four routes of entry into the human body are
Are impelled along a conductor
When voltage is applied along a conductor, free electrons:
Exists at all points along it's length
The magnetic field around a current carrying wire:
Voltage/Amps
What is the formula for electrical resistance (ohms)
Thermocouple
A ________ generates a small amount of voltage when heated.
Sensible heat
The quantity of heat involved to change a substance that can be measured with a
thermometer.
Latent heat
The amount of heat required to bring about a change in state in a substance.
Specific heat
The amount of heat in BTU's required to change the temperature of 1 lb of a
substance 1 degree F
force per unit of area
Pressure is ___________ per _________ _______
Positive diplacement and Non-positive displacement pumps.
ACCURATE ANSWERS UPDATED 2026/2027
BEST SOLUTION RATED A+ FOR SUCCESS
Lockout/Tagout
Standard procedure used to safely de-energize equipment on circuits before they
are worked on:
Fall hazards, Electrical hazards, Caught in, Struck by
Four focus inspectioin OSHA compliance officers look for:
Plane End Square Cut (PESC)
Thread and Coupling (T&C)
Thread Both Ends (TBE)
Steel pipe is supplied with the following end finish:
Start/Stop, Regulate/Throttle, Relief, Reduce
Four principle functions of valves
125F
Never expose any part of a compressed gas cylinder to temperatures above:
350F
Max service temperature of a brazed joint?
Straight, Choker, Basket
Three basic hitches which can be used for lifting with a sling
6300F
Oxyacetylene flame has a peak temperature of roughly:
Immediate danger to Live and Health
IDLH in regards to OSHA stands for
, PIPEFITTER STAR EXAM PART 2 WITH 100%
ACCURATE ANSWERS UPDATED 2026/2027
BEST SOLUTION RATED A+ FOR SUCCESS
Inhalation, ingestion, absorption, and injection.
Four routes of entry into the human body are
Are impelled along a conductor
When voltage is applied along a conductor, free electrons:
Exists at all points along it's length
The magnetic field around a current carrying wire:
Voltage/Amps
What is the formula for electrical resistance (ohms)
Thermocouple
A ________ generates a small amount of voltage when heated.
Sensible heat
The quantity of heat involved to change a substance that can be measured with a
thermometer.
Latent heat
The amount of heat required to bring about a change in state in a substance.
Specific heat
The amount of heat in BTU's required to change the temperature of 1 lb of a
substance 1 degree F
force per unit of area
Pressure is ___________ per _________ _______
Positive diplacement and Non-positive displacement pumps.
