NCCER Mod 3 Trade Terms ONLY EXAM (LATEST) || MOST
RECENT EXAM 2026|2027 ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+ | GUARANTEED SUCCESS!! NEWEST
Foot-pounds -ANSWERS-Unit of measure used to describe the amount
of pressure exerted (torque) to tighten a large object.
Hex Key Wrench -ANSWERS-A hexagonal steel bar that is bent to form a
right angel. Often referred to as an Allen wrench.
Inch-pounds -ANSWERS-Unit of measure used to describe the amount
of pressure exerted (torque) to tighten a small object.
Joint -ANSWERS-The point where members or the edges of members
are joined.
Kerf -ANSWERS-A cut or channel made by a saw.
Level -ANSWERS-Perfectly horizontal; completely flat; also, a tool used
to determine if an object is level.
, Miter Joint -ANSWERS-A joint made by fastening together usually
perpendicular parts with the ends cut at an angle.
Nail Puller -ANSWERS-A tool used to remove nails.
Newton-meter -ANSWERS-A measure of torque or moment equal to
the force of one Newton applied to a lever one meter long.
Open-end Wrench -ANSWERS-A non-adjustable wrench with a fixed
opening at each end that is typically different, allowing it to be used to
fit two different nut or bolts sizes.
Peening -ANSWERS-The process of bending, shaping, or cutting
material by striking it with a tool.
Pipe Wrench -ANSWERS-A wrench for gripping and turning a pipe or
pipe-shaped object; it tightens when turned in one direction.
Planed -ANSWERS-Describing a surface made smooth by using a tool
called a plane.
Pliers -ANSWERS-A scissor-shaped type of adjustable wrench equipped
with jaws and teeth to grip objects.
RECENT EXAM 2026|2027 ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+ | GUARANTEED SUCCESS!! NEWEST
Foot-pounds -ANSWERS-Unit of measure used to describe the amount
of pressure exerted (torque) to tighten a large object.
Hex Key Wrench -ANSWERS-A hexagonal steel bar that is bent to form a
right angel. Often referred to as an Allen wrench.
Inch-pounds -ANSWERS-Unit of measure used to describe the amount
of pressure exerted (torque) to tighten a small object.
Joint -ANSWERS-The point where members or the edges of members
are joined.
Kerf -ANSWERS-A cut or channel made by a saw.
Level -ANSWERS-Perfectly horizontal; completely flat; also, a tool used
to determine if an object is level.
, Miter Joint -ANSWERS-A joint made by fastening together usually
perpendicular parts with the ends cut at an angle.
Nail Puller -ANSWERS-A tool used to remove nails.
Newton-meter -ANSWERS-A measure of torque or moment equal to
the force of one Newton applied to a lever one meter long.
Open-end Wrench -ANSWERS-A non-adjustable wrench with a fixed
opening at each end that is typically different, allowing it to be used to
fit two different nut or bolts sizes.
Peening -ANSWERS-The process of bending, shaping, or cutting
material by striking it with a tool.
Pipe Wrench -ANSWERS-A wrench for gripping and turning a pipe or
pipe-shaped object; it tightens when turned in one direction.
Planed -ANSWERS-Describing a surface made smooth by using a tool
called a plane.
Pliers -ANSWERS-A scissor-shaped type of adjustable wrench equipped
with jaws and teeth to grip objects.
